ADS8588SIPM
德州儀器
- Lifecycle
- Active
- Stock
- 5425 件
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS8588SIPM 和 ADS8555SPM 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS8588SIPM and ADS8555SPM are both 16-bit simultaneous-sampling SAR ADCs in a 64-pin LQFP package, making them strong functional replacement candidates. However, the ADS8588SIPM offers eight channels versus six on the ADS8555SPM, and the two devices differ in throughput and analog input architecture. Designers should validate channel count requirements, sampling rate headroom, and input configuration before substituting one for the other in an existing design.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8588SIPM | ADS8555SPM | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 16 bit | Both are 16-bit, so nominal precision is equivalent for substitutability. |
| Number of ADC channels | 8 single-ended | 6 single-ended / 3 differential | Channel count and input topology determine how many signals can be sampled and whether differential inputs are available. |
| Maximum sampling rate | 500 kSPS | 630 kSPS | Sampling rate limits the maximum signal bandwidth and throughput the system can digitize. |
| Input voltage range | ±10 V, ±5 V | ±10 V, ±5 V | Matching input ranges allow the same sensor or front-end signal chain to be reused without redesign. |
| Supply voltage | 5 V analog (AVDD) | 5 V analog (AVDD) | Compatible analog supply simplifies power-rail reuse in an existing design. |
| Interface | Parallel / Serial (SPI) | Parallel / Serial (SPI) | Interface compatibility determines whether the host processor connection can remain unchanged. |
| Package | LQFP-64 | LQFP-64 | Same package footprint enables a drop-in board-level substitution without layout changes. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +125 °C | Equivalent temperature ratings ensure both parts suit the same industrial environments. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8588SIPM | ADS8555SPM |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | - | 630k |
| Number of Inputs | 8 | 6 |
| Input Type | Single Ended | Single Ended |
| Data Interface | Parallel, Serial | SPI, Parallel |
| Configuration | PGA-ADC | S/H-ADC |
| Ratio - S / H: ADC | 0:1 | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 4.75V ~ 5.25V | 5V |
| Voltage - Supply, Digital | 2.3V ~ 5.25V | 2.7V ~ 3.6V, 5V |
| Features | Simultaneous Sampling | Simultaneous Sampling |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Base Product Number | ADS8588 | - |
| Sampling Rate (Per Second) | 200k | - |
| Number of A / D Converters | 8 | - |
| Mounting Type | Surface Mount | - |
| Packaging | Tray | - |
The ADS8588SIPM is an 8-channel, 16-bit simultaneous-sampling SAR ADC with integrated analog front-end, operating from a single 5 V supply. The ADS8555SPM is a 6-channel, 16-bit simultaneous-sampling SAR ADC that requires separate analog (5 V) and digital (3.3 V to 5 V) supplies. The ADS8588SIPM integrates input clamps, programmable gain amplifier, and low-pass filter, while the ADS8555SPM provides a simpler front-end with a wider analog input range option (±10 V or ±5 V).
The ADS8588SIPM provides 8 simultaneous-sampling channels at up to 500 kSPS per channel. The ADS8555SPM provides 6 simultaneous-sampling channels at up to 630 kSPS per channel. The ADS8555SPM offers a higher per-channel throughput but fewer channels, while the ADS8588SIPM offers more channels at a slightly lower maximum rate.
No. The ADS8588SIPM features a programmable input range of ±10 V or ±5 V with integrated PGA and input clamping. The ADS8555SPM supports a fixed ±10 V or ±5 V input range (selectable via configuration) but does not integrate a PGA or input clamp circuitry. Designers must provide external protection and scaling for the ADS8555SPM if needed.
The ADS8588SIPM operates from a single 5 V analog supply and includes an internal reference and digital interface supply. The ADS8555SPM requires a 5 V analog supply (AVDD) and a separate digital supply (DVDD) of 3.3 V to 5 V, plus an external reference or use of its internal reference. The dual-supply architecture of the ADS8555SPM allows flexible logic interfacing but requires additional supply sequencing considerations.
Both devices support a parallel interface for data readout. The ADS8588SIPM provides a 16-bit parallel interface with optional byte mode. The ADS8555SPM also provides a 16-bit parallel interface and additionally supports a serial interface (SPI-compatible) for reduced pin count. The ADS8588SIPM does not offer a serial interface option.
The ADS8588SIPM is offered in a 64-pin LQFP package. The ADS8555SPM is offered in a 64-pin LQFP package as well. Despite the same package footprint, the pin functions and pinouts are not identical, so PCB layouts must be designed specifically for each device. Direct drop-in replacement is not possible without layout changes.
The ADS8588SIPM is better suited for applications requiring 8 simultaneous channels, such as multi-axis motor control or three-phase power monitoring with additional sensors. The ADS8555SPM is better suited for 6-channel simultaneous sampling with higher per-channel throughput, such as certain power quality analyzers or protection relays where six channels (e.g., three voltage and three current) are sufficient.
No. Although both are 16-bit simultaneous-sampling SAR ADCs in 64-pin LQFP packages, they differ in channel count (8 vs 6), supply architecture (single 5 V vs dual 5 V/3.3–5 V), input front-end (integrated PGA and clamps vs external), interface options (parallel only vs parallel and serial), and pinout. Interchangeability requires a full schematic and layout review against the respective datasheets.