ADS8556IPM
德州儀器
- Lifecycle
- Active
- Stock
- 6944 件
- Package
- LQFP-64
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS8556IPM 和 ADS8548SPMR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS8556IPM and ADS8548SPMR are both 16-bit SAR analog-to-digital converters offering comparable resolution and sample rate, making the ADS8548SPMR a viable functional replacement candidate for the ADS8556IPM in many designs. However, the two devices differ in channel count, package footprint, and analog supply configuration, so the replacement is not a direct drop-in and requires careful validation of the system interface, board layout, and power rails before adoption.
德州儀器
國家電晶體
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8556IPM | ADS8548SPMR | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 14 bit | Higher resolution provides finer measurement granularity; a 16-bit ADC offers 4x the code count of a 14-bit device, affecting accuracy and dynamic range. |
| Number of Input Channels | 6 (single-ended) / 3 (differential) | 8 (single-ended) / 4 (differential) | Channel count determines how many signals can be sampled; the ADS8548 offers two additional single-ended inputs, which may be essential for multi-sensor systems. |
| Sampling Rate (Max) | 630 kSPS | 500 kSPS | Maximum throughput affects the ability to capture fast-changing signals; a higher rate supports wider signal bandwidth and faster system response. |
| Input Type | Single-ended / Differential (pseudo-differential) | Single-ended / Differential (pseudo-differential) | Input configuration determines compatibility with sensor topologies; both support flexible input modes, but channel mapping differs. |
| Supply Voltage (Analog) | 5 V (analog), 2.7–5.5 V (digital) | 5 V (analog), 2.7–5.5 V (digital) | Supply requirements affect power design and level compatibility; identical rails simplify substitution in existing designs. |
| Interface | Parallel / Serial (SPI-compatible) | Parallel / Serial (SPI-compatible) | Interface compatibility determines whether the part can drop into an existing digital bus; both offer parallel and serial options. |
| Package | 64-pin LQFP (PM) | 64-pin LQFP (PMR) | Package footprint and pinout must match for board-level substitution; both use a 64-pin LQFP but pin assignments may differ. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +125°C | Temperature range affects suitability for harsh environments; the wider range of the ADS8548 supports industrial and automotive applications. |
| Power Consumption (Typical) | ~250 mW | ~200 mW | Power consumption impacts thermal design and energy efficiency; lower consumption is beneficial in portable or densely packed systems. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8556IPM | ADS8548SPMR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | 16 | 14 |
| Sampling Rate(Per Second) | 630k | 600k |
| Number of Inputs | 6 | 8 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, Parallel | SPI, Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 5.5V |
| Features | Simultaneous Sampling | Simultaneous Sampling |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
The ADS8556IPM is a 16-bit, 6-channel simultaneous-sampling SAR ADC with a maximum throughput of 630 kSPS per channel, while the ADS8548SPMR is a 14-bit, 8-channel simultaneous-sampling SAR ADC with a maximum throughput of 500 kSPS per channel. The ADS8556IPM offers higher resolution and a faster per-channel conversion rate, whereas the ADS8548SPMR provides two additional input channels at reduced resolution and speed.
No. The ADS8556IPM is supplied in a 64-pin LQFP package (PM suffix), and the ADS8548SPMR is supplied in a 64-pin LQFP package (PMR suffix). Both are 64-pin LQFP devices, but the pin functions and channel assignments differ because the ADS8556 provides 6 channels and the ADS8548 provides 8 channels, so the PCB land pattern and pin definitions must be verified against each respective datasheet before any layout reuse.
No. Although both are 64-pin LQFP simultaneous-sampling SAR ADCs, they differ in resolution (16-bit vs 14-bit), channel count (6 vs 8), maximum throughput (630 kSPS vs 500 kSPS), and pin function assignments. A direct drop-in substitution is not supported; any replacement requires full validation of pinout, timing, reference, and interface compatibility against the manufacturer datasheets.
The ADS8556IPM supports a maximum throughput of 630 kSPS per channel with all six channels sampling simultaneously. The ADS8548SPMR supports a maximum throughput of 500 kSPS per channel with all eight channels sampling simultaneously. Both devices use a successive-approximation register architecture with simultaneous sampling to preserve phase relationships between channels.
Both the ADS8556IPM and ADS8548SPMR support bipolar differential analog inputs with a programmable input range of ±4 V or ±12 V (selectable via the range pin), and both include an internal reference and support external reference operation. The input structure is designed for simultaneous sampling of multiple channels, making both devices suitable for motor control, power monitoring, and multi-phase measurement applications.
Both devices provide a parallel digital interface with a flexible readout scheme, supporting 16-bit parallel bus operation for the ADS8556IPM and 14-bit parallel bus operation for the ADS8548SPMR. The interface includes conversion start, busy indication, and read control signals, and both devices support daisy-chain and multiple-device configurations through their digital control pins as documented in the respective datasheets.
Both the ADS8556IPM and ADS8548SPMR operate from a 5 V analog supply (AVDD) and a 2.7 V to 5.25 V digital supply (DVDD), with a separate 3 V to 5.5 V supply for the analog input range and reference circuitry as specified in the manufacturer datasheets. Designers should confirm exact supply rail tolerances and sequencing requirements from the official datasheet before finalizing the power design.
The ADS8556IPM is better suited when 16-bit resolution is required across six simultaneous channels at up to 630 kSPS per channel. The ADS8548SPMR is preferable when eight simultaneous channels are needed at 14-bit resolution and up to 500 kSPS per channel. The choice depends on the required resolution, channel count, and throughput of the target application rather than on a single superior device.