ADS7953QDBTRQ1
國家電晶體
- Lifecycle
- Active
- Stock
- 1543 件
- Package
- TSSOP-38
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS7953QDBTRQ1 和 ADS7951SDBTG4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS7953QDBTRQ1 and ADS7951SDBTG4 are not drop-in replacements for one another. Although both are 12-bit SAR ADCs from the same family in a TSSOP-38 package, they differ in channel count, input configuration, and automotive qualification, so the ADS7951SDBTG4 cannot directly substitute the ADS7953QDBTRQ1 in an existing design without schematic and layout changes.
國家電晶體
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7953QDBTRQ1 | ADS7951SDBTG4 | Why it matters |
|---|---|---|---|
| Number of Input Channels | 16 | 8 | Channel count determines how many analog signals can be multiplexed into the ADC; a 16-channel part cannot be directly substituted where 8 channels are sufficient, and vice versa affects board layout and cost. |
| Resolution | 12 bit | 12 bit | Resolution sets the smallest detectable analog step; both are 12-bit, so measurement granularity is equivalent. |
| Sampling Rate | 1 MSPS | 1 MSPS | Maximum throughput affects how fast the system can acquire signals; identical rates mean timing budgets remain unchanged. |
| Supply Voltage (Analog) | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Analog supply range must match the system rail; identical ranges allow the same power design to be reused. |
| Interface Type | SPI | SPI | Serial interface compatibility ensures the same host controller and firmware protocol can drive either device. |
| Package / Case | TSSOP-38 | TSSOP-38 | Package footprint and pin count must match for drop-in board replacement; identical packages simplify substitution. |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | Temperature range determines suitability for automotive/industrial environments; matching ranges preserve environmental qualification. |
| Automotive Qualification | AEC-Q100 Qualified | Not AEC-Q100 Qualified | AEC-Q100 qualification is required for automotive applications; the non-qualified part cannot be used in automotive designs without requalification. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7953QDBTRQ1 | ADS7951SDBTG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Series | Automotive, AEC-Q100 | microPOWER™ |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | 1M |
| Number of Inputs | 16 | 8 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-PGA-S/H-ADC | MUX-S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | 2.7V ~ 5.25V |
| Voltage - Supply, Digital | 1.7V ~ 5.25V | 1.7V ~ 5.25V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Features | PGA | - |
The ADS7953QDBTRQ1 is a 12-bit, 16-channel successive-approximation register (SAR) analog-to-digital converter (ADC) qualified to AEC-Q100 Grade 1, while the ADS7951SDBTG4 is a 12-bit, 8-channel SAR ADC in the same TSSOP-38 (DBT) package family. The primary differences are channel count (16 vs 8), automotive qualification (Q1 vs non-Q1), and the associated operating temperature range.
Both devices are offered in a 38-pin TSSOP (DBT) package, but they are not functionally pin-compatible because the ADS7953 provides 16 analog input channels while the ADS7951 provides 8. Pin assignments for the additional input channels and associated control signals differ, so a direct drop-in replacement is not supported without schematic and layout review against the respective datasheets.
Yes. Both the ADS7953QDBTRQ1 and ADS7951SDBTG4 are 12-bit SAR ADCs from the ADS795x family, featuring a programmable input multiplexer, sample-and-hold, and SPI-compatible serial interface. Resolution and conversion architecture are common across the family, while channel count and qualification grade differ.
The ADS7953QDBTRQ1 carries the "Q1" suffix indicating AEC-Q100 qualification for automotive applications. The ADS7951SDBTG4 does not carry the Q1 designation and is intended for industrial/general-purpose use. Designs requiring automotive qualification should use the Q1-graded variant.
Not directly. The ADS7951SDBTG4 provides only 8 analog input channels versus 16 on the ADS7953QDBTRQ1, and it lacks the automotive Q1 qualification. Replacement requires verifying channel count requirements, firmware multiplexer sequencing, PCB pin mapping, and qualification requirements against the target application.
Both devices use an SPI-compatible serial interface for configuration and data readback, consistent with the ADS795x family architecture. Host firmware must account for the different channel counts when configuring the multiplexer and sequencing conversions.
The ADS7953QDBTRQ1 is the appropriate choice when 16 analog channels and AEC-Q100 Grade 1 qualification are required, such as in automotive sensor monitoring. The ADS7951SDBTG4 is better suited to lower-channel-count, non-automotive applications where 8 channels are sufficient.