ADS5474IPFP
德州儀器
- Lifecycle
- Active
- Stock
- 7275 件
- Package
- HTQFP-80
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS5474IPFP 和 ADS5423IPGPR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS5474IPFP and ADS5423IPGPR are both 14-bit high-speed analog-to-digital converters offering comparable sampling performance and a shared HTQFP-64 package footprint, making them a viable functional replacement candidate. However, the ADS5474IPFP provides a higher maximum sample rate and a wider analog input bandwidth, while the ADS5423IPGPR operates at a lower sample rate with a narrower input bandwidth. Designers should validate clocking, input drive, and output timing against the target system before substituting, as the two devices are not identical in dynamic performance and interface timing.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS5474IPFP | ADS5423IPGPR | Why it matters |
|---|---|---|---|
| Resolution | 14 bit | 14 bit | Bit depth determines the quantization granularity and achievable SNR; both are 14-bit so resolution is not a differentiator. |
| Sampling Rate | 400 MSPS | 80 MSPS | Maximum sample rate defines the input bandwidth and Nyquist limit; the ADS5474 supports much higher-speed signals than the ADS5423. |
| Input Type | Differential | Differential | Differential inputs improve common-mode rejection and dynamic performance; both devices use differential inputs. |
| Analog Supply Voltage | 3.3 V / 5 V (dual) | 5 V | Supply requirements affect board-level power design and compatibility; the ADS5474 uses separate analog and digital rails while the ADS5423 runs from a single 5 V supply. |
| Output Interface | Parallel LVDS | Parallel CMOS | Output signaling determines the digital interface, PCB routing, and FPGA/ASIC I/O compatibility; LVDS and CMOS are not directly interchangeable. |
| Package | HTQFP-80 | HTQFP-64 | Package footprint and pin count affect PCB layout and drop-in substitutability; the two parts are not footprint-compatible. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Industrial temperature range ensures reliable operation across environments; both parts share the same range. |
| Power Consumption (typical) | ~2.2 W | ~1.0 W | Power dissipation impacts thermal design and supply sizing; the higher-speed ADS5474 consumes significantly more power. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS5474IPFP | ADS5423IPGPR |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 14 | 14 |
| Sampling Rate(Per Second) | 400M | 80M |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | Parallel | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Pipelined | Pipelined |
| Reference Type | Internal | Internal |
| Voltage - Supply, Analog | 3.1V ~ 3.6V, 5V | 5V |
| Voltage - Supply, Digital | 3V ~ 3.6V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS5474IPFP is a 14-bit, 400-MSPS analog-to-digital converter in a 100-pin HTQFP (PFP) package, while the ADS5423IPGPR is a 14-bit, 80-MSPS ADC in a 52-pin HTQFP (PGP) package. The ADS5474 offers a significantly higher sampling rate, whereas the ADS5423 targets lower-speed, lower-power applications.
No. The ADS5474IPFP uses a 100-pin HTQFP package and the ADS5423IPGPR uses a 52-pin HTQFP package, so they have different pin counts, footprints, and PCB land patterns and cannot be treated as drop-in replacements.
Both devices provide 14-bit resolution. The ADS5474IPFP supports a maximum sampling rate of 400 MSPS, while the ADS5423IPGPR supports a maximum sampling rate of 80 MSPS.
The ADS5474IPFP typically dissipates approximately 2.2 W at 400 MSPS, whereas the ADS5423IPGPR typically dissipates approximately 1.0 W at 80 MSPS. The higher power of the ADS5474 reflects its much higher sampling rate.
Both converters accept differential analog inputs and provide parallel CMOS-compatible output data. The ADS5474IPFP delivers 14-bit parallel LVDS/CMOS output data at up to 400 MSPS, and the ADS5423IPGPR delivers 14-bit parallel CMOS output data at up to 80 MSPS.
Only if the system's maximum sample rate requirement is 80 MSPS or less and the design is re-laid out for the 52-pin package. Because the packages, pinouts, and maximum sampling rates differ, the substitution requires full validation against the ADS5423IPGPR datasheet and the target design.
The ADS5474IPFP is suited to high-speed signal acquisition such as test and measurement, radar, and wideband communications receivers. The ADS5423IPGPR is suited to lower-speed instrumentation, medical imaging, and general-purpose data acquisition where 80 MSPS is sufficient.