ADS5400IPZP
德州儀器
- Lifecycle
- Active
- Stock
- 7717 件
- Package
- HTQFP-100
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS5400IPZP 和 ADS5423IPGPR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS5400IPZP and ADS5423IPGPR are not drop-in replacements for one another. They differ in resolution, sampling rate, analog input architecture, and package footprint, so a direct board-level substitution is not feasible without redesign of the signal chain, clocking, and layout.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS5400IPZP | ADS5423IPGPR | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 14 bit | Higher resolution provides finer quantization and better dynamic range, which directly affects measurement accuracy and SNR. |
| Sampling Rate | 1 GSPS | 80 MSPS | The maximum sample rate determines the input bandwidth the ADC can capture; a 1 GSPS device supports much wider signal bandwidths than an 80 MSPS device. |
| Input Type | Differential | Differential | Differential inputs improve common-mode noise rejection and are required for optimal performance in high-speed signal chains. |
| Output Interface | LVDS (DDR) | LVDS (DDR) | The digital output format must match the receiving FPGA/ASIC interface; LVDS DDR is common for high-speed converters. |
| Supply Voltage | 3.3 V analog, 1.8 V digital | 3.3 V analog, 3.3 V digital | Supply rail requirements affect board power design and level-shifting needs; mismatched rails require different power architectures. |
| Power Consumption | Approx. 2.4 W | Approx. 1.1 W | Power dissipation impacts thermal design, supply sizing, and overall system efficiency; the higher-speed device consumes significantly more. |
| Package | 100-pin HTQFP (PZP) | 64-pin HTQFP (PGP) | Package footprint and pin count determine PCB layout compatibility; these parts are not drop-in replacements for each other. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Industrial temperature range ensures reliable operation across harsh environments; identical ranges ease qualification. |
| SNR (typical) | Approx. 61 dBFS | Approx. 72 dBFS | Signal-to-noise ratio defines the usable dynamic range; the 14-bit device offers notably better SNR for sensitive receive chains. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS5400IPZP | ADS5423IPGPR |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 12 | 14 |
| Sampling Rate(Per Second) | 1G | 80M |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | LVDS - Parallel | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Pipelined | Pipelined |
| Reference Type | External, Internal | Internal |
| Voltage - Supply, Analog | 3.135V ~ 3.465V, 5V | 5V |
| Voltage - Supply, Digital | 3.135V ~ 3.465V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Features | Temperature Sensor | - |
The ADS5400IPZP is a 12-bit, 1-GSPS analog-to-digital converter in a 100-pin HTQFP (PZP) package, while the ADS5423IPGPR is a 14-bit, 80-MSPS ADC in a 52-pin HTQFP (PGP) package. They differ in resolution, sampling rate, package, pin count, and power consumption, so they are not drop-in replacements for each other.
No. The ADS5400IPZP uses a 100-pin HTQFP (PZP) package, whereas the ADS5423IPGPR uses a 52-pin HTQFP (PGP) package. The pin counts and land patterns differ, so the PCB footprints are not compatible.
The ADS5400IPZP supports sampling rates up to 1 GSPS, while the ADS5423IPGPR supports up to 80 MSPS. The ADS5400IPZP is therefore intended for much higher-speed signal acquisition applications.
The ADS5423IPGPR provides 14-bit resolution, while the ADS5400IPZP provides 12-bit resolution. The ADS5423IPGPR offers finer quantization, whereas the ADS5400IPZP prioritizes higher sampling speed.
No. Because the two devices have different pin counts (100 pins vs. 52 pins) and different package types (PZP vs. PGP), they are not pin-to-pin compatible and cannot be interchanged on the same PCB layout without redesign.
Both the ADS5400IPZP and ADS5423IPGPR are differential-input ADCs. The ADS5400IPZP is specified for analog input frequencies up to its 1-GSPS operating range, while the ADS5423IPGPR is specified for its 80-MSPS operating range. Designers should consult the respective datasheets for exact input voltage range and bandwidth specifications.
No, not as a direct substitute. The ADS5423IPGPR has a lower sampling rate (80 MSPS vs. 1 GSPS), higher resolution (14-bit vs. 12-bit), a different package and pin count, and different power and interface requirements. Any substitution would require a full design review against the manufacturer datasheets.