ADS1254E
德州儀器
- Lifecycle
- Active
- Stock
- 4308 件
- Package
- SSOP-20
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS1254E 和 ADS1253E/2K5 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS1254E and ADS1253E/2K5 are both 24-bit delta-sigma analog-to-digital converters from Texas Instruments sharing the same SOIC-20 package and 5 V supply architecture, making the ADS1253E/2K5 a viable functional replacement candidate for the ADS1254E in many designs. However, the two devices differ in channel count, sample rate, and input configuration, so system-level validation against the target application's throughput and signal-chain requirements is recommended before substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1254E | ADS1253E/2K5 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 20 | Higher resolution provides finer measurement granularity; a 24-bit ADC resolves smaller signal changes than a 20-bit ADC, which is critical for precision sensing applications. |
| Number of Input Channels | 4 (differential) | 1 (differential) | Channel count determines how many independent signals can be measured; a 4-channel device supports multi-sensor systems without external multiplexing, while a single-channel device suits focused single-signal designs. |
| Maximum Sample Rate (SPS) | 20k | 20k | Sample rate sets the maximum signal bandwidth that can be captured; both parts share the same throughput, so timing performance is equivalent for data acquisition. |
| Interface Type | SPI (serial) | SPI (serial) | The digital interface must match the host microcontroller; both use SPI, so firmware and bus wiring are compatible between the two parts. |
| Supply Voltage (analog) | 5 V | 5 V | Analog supply voltage determines the input signal range and reference headroom; identical 5 V supplies allow the same front-end biasing and reference design. |
| Package / Mounting | SSOP-20 (surface mount) | SSOP-20 (surface mount) | Package and footprint must match the PCB layout; identical SSOP-20 packages allow drop-in replacement without board redesign. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | The temperature range defines the environments where the part is guaranteed to meet specifications; matching industrial ranges ensure equivalent reliability in the same application. |
| Input Type | Differential | Differential | Differential inputs reject common-mode noise and improve accuracy in noisy environments; both parts offer differential sensing, preserving signal integrity. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1254E | ADS1253E/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 20k | 20k |
| Number of Inputs | 4 | 4 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | MUX-ADC | MUX-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 1.8V ~ 3.6V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS1254E is a 24-bit delta-sigma ADC with a fixed data rate of 20kSPS, while the ADS1253E/2K5 is a 24-bit delta-sigma ADC with a fixed data rate of 20kSPS in a smaller package. The ADS1254E offers a 4-channel differential input multiplexer, whereas the ADS1253E/2K5 provides a single differential input channel. Both operate from a single 5V supply and communicate via a serial interface.
No, they are not pin-compatible. The ADS1254E is housed in a 20-pin SSOP package, while the ADS1253E/2K5 is housed in a 16-pin SSOP package. The pin counts and pin functions differ, so they cannot be used interchangeably on the same PCB footprint without redesign.
Both the ADS1254E and ADS1253E/2K5 are 24-bit delta-sigma analog-to-digital converters with a fixed output data rate of 20kSPS. Neither device offers programmable data rate settings; the data rate is determined by the internal modulator and digital filter configuration.
The ADS1254E features a 4-channel differential input multiplexer, allowing selection among four differential input pairs. The ADS1253E/2K5 has a single differential input channel and does not include an input multiplexer.
Both the ADS1254E and ADS1253E/2K5 operate from a single 5V analog supply. Each device requires an external voltage reference; the reference input range and absolute maximum ratings should be confirmed in the respective manufacturer datasheets before design.
Both devices use a synchronous serial interface compatible with SPI for communication with a host microcontroller or DSP. The interface includes serial clock, data output, and chip-select or frame-synchronization signals, with timing parameters specified in the respective datasheets.
No. The ADS1253E/2K5 cannot be used as a drop-in replacement for the ADS1254E due to differences in package size, pin count, pin functions, and input channel configuration. A redesign of the PCB and firmware is required if migrating between these devices.