ADS127L01IPBSR
德州儀器
- Lifecycle
- Active
- Stock
- 3034 件
- Package
- TQFP-32
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS127L01IPBSR 和 ADS124S08IPBS 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS124S08IPBS and ADS127L01IPBSR are both 24-bit delta-sigma ADCs in a TQFP-32 package, but they differ fundamentally in resolution architecture, sample rate, channel count, and interface configuration. The ADS124S08IPBS is a low-speed, high-resolution multiplexed sensor ADC with 8 single-ended or 4 differential inputs and integrated PGA, while the ADS127L01IPBSR is a wide-bandwidth single-channel ADC optimized for high-speed data acquisition. These differences in channel count, throughput, and digital interface make them unsuitable as direct substitutes in the same socket without significant redesign.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS124S08IPBS | ADS127L01IPBSR | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 24 | Both are 24-bit delta-sigma ADCs, so nominal resolution is equivalent for precision measurement applications. |
| Number of input channels | 12 (single-ended) / 6 (differential) | 1 (differential) | The ADS124S08 integrates a multiplexer for multi-sensor systems, while the ADS127L01 is a single-channel device, limiting direct substitutability in multi-channel designs. |
| Maximum sample rate | 4 kSPS | 512 kSPS | The ADS127L01 supports much higher throughput, making it suitable for wide-bandwidth signals, whereas the ADS124S08 targets slower precision sensing. |
| Input type | Differential / single-ended (multiplexed) | Differential | Single-ended capability on the ADS124S08 simplifies interfacing to ground-referenced sensors, which the ADS127L01 does not offer directly. |
| Programmable gain amplifier (PGA) | Yes (gains 1 to 128) | No | An integrated PGA allows the ADS124S08 to directly digitize small sensor signals, while the ADS127L01 requires external amplification. |
| Supply voltage (analog) | 2.7 V to 5.25 V (single supply) | 2.7 V to 3.6 V (analog) | The wider analog supply range of the ADS124S08 supports 5 V systems, whereas the ADS127L01 is limited to 3.6 V analog supply. |
| Interface | SPI | SPI | Both use a standard SPI interface, easing digital-side integration and firmware reuse. |
| Package | TQFP-32 | TQFP-32 | Identical package and pin count simplify PCB footprint considerations, though pinouts differ and must be verified. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +125 °C | Both cover the industrial temperature range, so environmental robustness is comparable. |
| Typical application focus | Multi-channel precision sensor measurement (RTD, thermocouple, bridge) | High-speed wide-bandwidth precision data acquisition | The devices target different signal-chain roles, so they are not drop-in substitutes despite shared 24-bit resolution. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS127L01IPBSR | ADS124S08IPBS |
|---|---|---|
| Part Status | Active | Active |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 512k | 4k |
| Number of Inputs | 1 | 12 |
| Input Type | Differential | Single Ended |
| Data Interface | SPI | SPI |
| Configuration | ADC | MUX-PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 2.7V ~ 3.6V | 2.7V ~ 5.25V |
| Voltage - Supply, Digital | 1.7V ~ 3.6V | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 125°C | -50°C ~ 125°C |
| Ratio - S / H: ADC | - | 0:1 |
| Features | - | PGA |
No. Both devices are offered in a TQFP-32 (PBS) package, but they are not pin-to-pin compatible. The ADS124S08 is a 24-bit, 8-channel delta-sigma ADC with an integrated PGA and multiplexer, while the ADS127L01 is a 24-bit, single-channel wide-bandwidth delta-sigma ADC. Pin functions and the analog input architecture differ, so the PCB layout and external circuitry must be redesigned rather than directly swapped.
The ADS124S08IPBS provides an 8-channel input multiplexer (4 differential or 8 single-ended inputs) with an integrated programmable gain amplifier, making it suited to multi-sensor scanning applications. The ADS127L01IPBSR is a single-channel device intended for high-speed, high-accuracy conversion of one signal, typically in wide-bandwidth data acquisition and vibration/audio measurement systems.
The ADS124S08IPBS supports data rates up to 4 kSPS in its high-resolution modes. The ADS127L01IPBSR supports significantly higher throughput, with selectable data rates up to 512 kSPS in wide-bandwidth mode. The ADS127L01 is therefore preferred when higher sampling bandwidth is required, while the ADS124S08 targets lower-speed, high-resolution multi-channel measurements.
No. The ADS124S08IPBS integrates a low-noise PGA with selectable gains, allowing direct connection of low-level sensors such as RTDs and thermocouples. The ADS127L01IPBSR does not include an integrated PGA; it is a single-channel ADC intended to be driven by an external amplifier or front-end signal conditioning stage.
Both devices operate from an analog supply (AVDD) of 2.7 V to 5.25 V and a digital supply (DVDD) of 1.7 V to 3.6 V, consistent with their datasheet specifications. Designers should confirm the exact recommended operating conditions and decoupling requirements in the respective manufacturer datasheets before finalizing the power supply design.
The ADS124S08IPBS is better suited to multi-channel sensor measurement because of its 8-channel multiplexer, integrated PGA, and low-speed high-resolution conversion, which are advantageous for RTD, thermocouple, and bridge sensor applications. The ADS127L01IPBSR is better suited to high-speed signal acquisition such as vibration analysis, audio, and wide-bandwidth data acquisition due to its single-channel architecture and data rates up to 512 kSPS.
No. Although both are 24-bit delta-sigma ADCs in a TQFP-32 package, they differ in channel count, PGA integration, maximum data rate, and pin functions. A direct replacement is not possible without redesigning the analog front end, updating the digital interface configuration, and revalidating the system against the ADS127L01 datasheet.