ADS1230IPW
德州儀器
- Lifecycle
- Active
- Stock
- 2859 件
- Package
- TSSOP-16
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS1230IPW 和 ADS1232IPWRG4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS1230IPW and ADS1232IPWRG4 share the same core 24-bit delta-sigma ADC architecture, TSSOP-16 footprint, and 2.7 V to 5.3 V supply range, making the ADS1232IPWRG4 a viable functional upgrade path when its additional input channel and higher programmable gain options are acceptable. Designers should validate the increased channel count, gain settings, and data rate configuration against the target application before committing to a drop-in substitution.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1230IPW | ADS1232IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 20 | 24 | Higher resolution enables finer measurement of small signal changes, which is critical for precision weigh scales and sensor interfaces. |
| Number of input channels | 1 (differential) | 2 (differential) | The channel count determines how many independent sensor inputs can be measured without external multiplexing. |
| Input PGA gain options | Fixed gain of 128 | Selectable gains of 1, 2, 64, 128 | Selectable gain allows the same device to interface with a wider range of bridge and sensor signal amplitudes. |
| Data output rate | 10 SPS or 80 SPS | 10 SPS or 80 SPS | Output rate sets the trade-off between noise performance and measurement speed for the application. |
| Supply voltage range | 2.7 V to 5.3 V | 2.7 V to 5.3 V | The supply range determines compatibility with common 3 V and 5 V system rails. |
| Interface type | Serial (SPI-compatible, 2-wire) | Serial (SPI-compatible) | The digital interface must match the host microcontroller to allow direct connection without glue logic. |
| Package | 16-pin TSSOP | 24-pin TSSOP | Package footprint and pin count affect PCB layout and whether the parts are drop-in compatible. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range confirms suitability for industrial and commercial environments. |
| Internal oscillator | Yes (on-chip) | Yes (on-chip) | An internal oscillator simplifies design by eliminating an external clock source. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1230IPW | ADS1232IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 20 | 24 |
| Sampling Rate(Per Second) | 80 | 80 |
| Number of Inputs | 1 | 2 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | PGA-ADC | MUX-PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 5.3V | 2.7V ~ 5.3V |
| Voltage - Supply, Digital | 2.7V ~ 5.3V | 2.7V ~ 5.3V |
| Features | PGA | PGA |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 105°C |
The ADS1230IPW is a single-channel 20-bit delta-sigma ADC in a 16-pin TSSOP package, while the ADS1232IPWRG4 is a dual-channel 24-bit delta-sigma ADC in a 24-pin TSSOP package (the RG4 suffix denotes Green/RoHS-compliant tape-and-reel packaging). The ADS1232 offers higher resolution, an additional input channel, and an onboard temperature sensor input, whereas the ADS1230 provides a simpler single-channel solution.
No. The ADS1230IPW uses a 16-pin TSSOP package and the ADS1232IPWRG4 uses a 24-pin TSSOP package, so they have different pin counts and pinouts and cannot be dropped into the same PCB land pattern without a redesign.
The ADS1230IPW provides 20-bit resolution, and the ADS1232IPWRG4 provides 24-bit resolution. Both devices support selectable output data rates of 10 SPS and 80 SPS, which are typical for precision weigh-scale and bridge-sensor applications.
Yes. Both the ADS1230IPW and ADS1232IPWRG4 integrate a low-noise PGA with selectable gains of 1, 2, 64, and 128, allowing direct interface to low-level bridge sensors such as load cells without external amplification.
The ADS1230IPW is a single-channel device with one differential input pair. The ADS1232IPWRG4 provides two differential input channels plus a dedicated temperature sensor input, making it suitable for applications requiring multiple sensor inputs or temperature compensation.
Both devices operate from a single analog supply of 2.7 V to 5.3 V and a digital supply of 2.7 V to 5.3 V, and both use a simple two-wire serial interface compatible with SPI for reading conversion data and configuring the device.
The ADS1232IPWRG4 carries the G4 suffix indicating Green/RoHS-compliant construction and is supplied in tape-and-reel format. The ADS1230IPW is supplied in a 16-pin TSSOP tube or reel depending on the ordering variant; designers should confirm the specific orderable part number's RoHS status and packaging on the manufacturer datasheet before production release.