ADS1220IPWR
德州儀器
- Lifecycle
- Active
- Stock
- 6260 件
- Package
- TSSOP-16
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS1220IPWR 和 ADS1286UC/2K5 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS1220IPWR and ADS1286UC/2K5 are not drop-in replacements for one another. The ADS1220IPWR is a 24-bit, 4-channel delta-sigma ADC with an integrated PGA and SPI interface in a TSSOP-16 package, while the ADS1286UC/2K5 is a 12-bit, single-channel successive-approximation ADC with a serial interface in a SOIC-8 package. Their resolution, channel count, conversion architecture, package footprint, and supply requirements differ substantially, so substituting one for the other requires a full schematic and layout redesign rather than a direct swap.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1220IPWR | ADS1286UC/2K5 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 12 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 12-bit device. |
| Number of input channels | 4 (2 differential / 4 single-ended) | 1 (single-ended) | Channel count defines how many signals can be measured; multi-channel parts suit multi-sensor systems while single-channel parts suit one-signal designs. |
| Interface type | SPI | SPI | The digital interface must match the host microcontroller; both use SPI, easing drop-in compatibility at the bus level. |
| Input type | Differential / single-ended | Single-ended | Differential inputs reject common-mode noise and suit low-level sensor signals, while single-ended inputs are simpler but more noise-sensitive. |
| Supply voltage (analog) | 2.3 V to 5.5 V | 4.5 V to 5.5 V | Supply range determines compatibility with low-voltage or 5 V systems; the wider range of the ADS1220 allows operation from lower rails. |
| Package | TSSOP-16 | SOIC-8 | Package footprint and pin count affect PCB layout and board space; these parts are not footprint-compatible. |
| Internal PGA | Yes (gain 1 to 128) | No | An internal programmable gain amplifier allows direct connection of small sensor signals without external amplification, simplifying the signal chain. |
| Internal reference | Yes | No (external reference required) | An internal reference reduces external component count and board space; an external reference offers flexibility but adds circuitry. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +85 °C | The temperature range defines the environments where the part can reliably operate; the wider range of the ADS1220 suits harsher conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1220IPWR | ADS1286UC/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 24 | 12 |
| Sampling Rate(Per Second) | 2k | 20k |
| Number of Inputs | 2, 4 | 1 |
| Input Type | Differential, Single Ended | Differential |
| Data Interface | SPI | SPI |
| Configuration | MUX-PGA-ADC | S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | SAR |
| Reference Type | External, Internal, Supply | External |
| Voltage - Supply, Analog | 2.3V ~ 5.5V, ±2.5 | 5V |
| Voltage - Supply, Digital | 2.3V ~ 5.5V | 5V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Features | PGA, Temperature Sensor | - |
The ADS1220IPWR is a 24-bit, 4-channel, delta-sigma ADC with an integrated programmable gain amplifier (PGA), internal voltage reference, and SPI interface, housed in a TSSOP-16 package. The ADS1286UC/2K5 is a 12-bit, single-channel, successive-approximation register (SAR) ADC with a pseudo-differential input, external reference requirement, and SPI interface, housed in a SOIC-8 package. The ADS1220 targets high-resolution sensor measurement, while the ADS1286 targets faster, lower-resolution sampling applications.
No. The ADS1220IPWR provides 24-bit resolution with programmable data rates up to 2 kSPS (in normal mode). The ADS1286UC/2K5 provides 12-bit resolution with a maximum sampling rate of 20 kSPS. These differing resolution and throughput specifications make them suited to different measurement classes.
No. The two devices differ in package (TSSOP-16 vs SOIC-8), pin count, pin functions, supply requirements, and external component needs (the ADS1220IPWR integrates a PGA and reference, while the ADS1286UC/2K5 requires an external reference). A direct drop-in replacement is not possible without a redesign of the PCB and signal chain.
The ADS1220IPWR operates from an analog supply (AVDD) of 2.3 V to 5.5 V and a digital supply (DVDD) of 2.3 V to 5.5 V. The ADS1286UC/2K5 operates from a single 5 V supply (4.5 V to 5.5 V typical per datasheet). Designs must account for these differences when selecting a replacement or shared supply rail.
The ADS1220IPWR is better suited for high-resolution sensor measurement because it offers 24-bit resolution, an integrated PGA for small-signal amplification, and an internal reference, which simplifies thermocouple, RTD, and bridge sensor interfaces. The ADS1286UC/2K5, with 12-bit resolution and no integrated PGA, is more appropriate for lower-resolution, higher-speed monitoring tasks.
Yes. Both the ADS1220IPWR and the ADS1286UC/2K5 provide an SPI-compatible serial interface for communication with a host microcontroller. However, the command sets, register maps, and data frame formats differ between the two devices, so firmware must be rewritten when migrating between them.
The ADS1220IPWR is supplied in a TSSOP-16 package and is specified for operation over the –40 °C to +125 °C temperature range. The ADS1286UC/2K5 is supplied in an SOIC-8 package and is specified over the –40 °C to +85 °C temperature range. The differing package footprints and temperature grades must be evaluated against the target application's thermal and assembly requirements.