ADS1220IPW
德州儀器
- Lifecycle
- Active
- Stock
- 4062 件
- Package
- TSSOP-16
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS1220IPW 和 ADS1222IPWRG4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS1222IPWRG4 is a functionally compatible replacement candidate for the ADS1220IPW, sharing the same 24-bit delta-sigma ADC architecture, TSSOP-16 footprint, and SPI interface, though the ADS1220IPW offers a wider supply range, higher programmable gain settings, and an integrated PGA that the ADS1222IPWRG4 does not provide. Designers should validate supply voltage, gain configuration, and input signal conditioning requirements before substituting.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1220IPW | ADS1222IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 24 | Both are 24-bit delta-sigma ADCs, so resolution alone does not differentiate them for substitutability. |
| Number of input channels | 4 (2 differential / 4 single-ended) | 2 (2 differential) | Channel count determines how many sensors or signal pairs can be measured; the ADS1220 supports more inputs than the ADS1222. |
| Interface | SPI | SPI | Both use SPI, so the host microcontroller interface is compatible between the two parts. |
| PGA / gain stage | Integrated PGA (gain 1 to 128) | No integrated PGA | An integrated PGA allows direct amplification of small sensor signals; the ADS1222 lacks this, requiring external amplification for low-level inputs. |
| Internal reference | Yes (2.048 V) | No (external reference required) | An internal reference simplifies design and reduces external components; the ADS1222 needs an external voltage reference. |
| Data rate (SPS) | Up to 2000 SPS | Up to 105 SPS | Higher sample rates enable faster signal acquisition; the ADS1220 is significantly faster than the ADS1222. |
| Supply voltage range | 2.7 V to 5.5 V (analog), 2.3 V to 5.5 V (digital) | 2.7 V to 5.5 V | Supply range affects compatibility with system rails; both operate over similar ranges but the ADS1220 specifies separate analog and digital rails. |
| Package | TSSOP-16 | TSSOP-16 | Identical package and pin count allow potential board-level drop-in compatibility, though pin functions must be verified. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +85 °C | The wider temperature range of the ADS1220 suits harsher environments, while the ADS1222 is limited to standard industrial ranges. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1220IPW | ADS1222IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 2k | 240 |
| Number of Inputs | 2, 4 | 2 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | MUX-PGA-ADC | MUX-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External, Internal, Supply | External |
| Voltage - Supply, Analog | 2.3V ~ 5.5V, ±2.5 | 2.7V ~ 5.5V |
| Voltage - Supply, Digital | 2.3V ~ 5.5V | 2.7V ~ 5.5V |
| Features | PGA, Temperature Sensor | Temperature Sensor |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
The ADS1220IPW is a 24-bit, 4-channel, delta-sigma ADC with a programmable gain amplifier (PGA), internal 2.048-V reference, and SPI interface, housed in a 16-pin TSSOP (PW) package. The ADS1222IPWRG4 is a 24-bit, 2-channel, delta-sigma ADC with a fixed gain of 1 to 128, an internal oscillator, and a two-wire serial interface, supplied in a 16-pin TSSOP (PW) package in tape-and-reel form with a Green (G4) designation. The ADS1220 integrates a PGA and reference, while the ADS1222 relies on external gain and reference configuration.
No. Although both devices are offered in a 16-pin TSSOP (PW) package, their pin functions and internal architectures differ. The ADS1220IPW provides a 4-channel input multiplexer, PGA, and SPI interface, whereas the ADS1222IPWRG4 provides a 2-channel input and a two-wire serial interface. Pin assignments and external component requirements are not identical, so a direct drop-in substitution is not supported without schematic and layout verification against the respective datasheets.
The ADS1220IPW offers a 4-channel input multiplexer with a low-noise PGA supporting gains from 1 to 128, suitable for direct sensor interfacing. The ADS1222IPWRG4 provides a 2-channel input with selectable gain of 1 to 128 but does not include an integrated PGA in the same configuration as the ADS1220. Designs requiring four differential or single-ended inputs should select the ADS1220IPW, while two-channel applications may consider the ADS1222IPWRG4.
The ADS1220IPW includes an internal 2.048-V reference and an internal oscillator, reducing external component count. The ADS1222IPWRG4 also integrates an internal oscillator but requires an external reference voltage for ratiometric or absolute measurements. Designs migrating between the two devices must account for reference source changes and associated noise and drift performance.
The ADS1220IPW uses a four-wire SPI-compatible interface (CS, SCLK, DIN, DOUT/DRDY), supporting daisy-chain and multiple device configurations. The ADS1222IPWRG4 uses a two-wire serial interface for data output and control. Firmware and host microcontroller interface code are therefore not interchangeable and must be rewritten when switching between the two devices.
Both devices are supplied in a 16-pin TSSOP (PW) package. The ADS1220IPW is typically ordered in tube form, while the ADS1222IPWRG4 suffix indicates tape-and-reel packaging (R) and a Green/RoHS-compliant (G4) designation. PCB land patterns are similar due to the shared package family, but pin functions differ, so layout reuse requires verification.
The ADS1220IPW is generally preferred for multi-channel precision sensor applications because it integrates a 4-channel input multiplexer, PGA, internal reference, and SPI interface in a single device, reducing board space and external components. The ADS1222IPWRG4 is better suited to simpler two-channel designs where an external reference is acceptable and a two-wire interface is sufficient.
No. The differing channel count, interface protocol, and reference architecture mean that firmware, schematic, and layout changes are required. The ADS1220IPW's SPI interface and integrated reference are not directly compatible with the ADS1222IPWRG4's two-wire interface and external reference requirement. Replacement should only be attempted after full validation against both manufacturer datasheets.