ADS1219IPWR
德州儀器
- Lifecycle
- Active
- Stock
- 5923 件
- Package
- TSSOP-16
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS1219IPWR 和 ADS1286UC/2K5 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS1219IPWR and ADS1286UC/2K5 are not drop-in replacements for one another. The ADS1219IPWR is a 24-bit, 4-channel delta-sigma ADC with an integrated PGA and I2C interface in a TSSOP-16 package, while the ADS1286UC/2K5 is a 12-bit, single-channel delta-sigma ADC with a serial SPI interface in a SOIC-8 package. Their differences in resolution, channel count, digital interface, and package footprint make them functionally incompatible without a full redesign.
德州儀器
德州儀器
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1219IPWR | ADS1286UC/2K5 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 12 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 12-bit device. |
| Number of input channels | 4 (differential/single-ended) | 1 (differential) | Channel count defines how many signals can be measured without external multiplexing; the ADS1219 supports multi-channel systems directly. |
| Interface type | I2C | SPI | The digital interface must match the host controller; I2C and SPI are not directly interchangeable without hardware or firmware changes. |
| Maximum sample rate | 1 kSPS | 20 kSPS | Sample rate sets the bandwidth of signals that can be captured; the ADS1286 supports much faster sampling than the ADS1219. |
| Supply voltage (analog) | 2.7 V to 5.5 V | 4.5 V to 5.5 V | Supply range determines compatibility with the system power rail; the ADS1219 operates at lower voltages than the ADS1286. |
| Input type | Differential or single-ended | Differential | Single-ended capability simplifies measurement of ground-referenced signals, while differential-only inputs require appropriate signal conditioning. |
| Package | TSSOP-16 | SOIC-8 | Package footprint and pin count affect PCB layout and cannot be substituted without board redesign. |
| Internal PGA / gain stage | Yes (programmable gain 1 to 128) | No | An integrated PGA allows direct amplification of small signals, reducing external components; the ADS1286 requires external gain circuitry. |
| Operating temperature range | -40 °C to +125 °C | -40 °C to +85 °C | The temperature range determines suitability for harsh or industrial environments; the ADS1219 supports a wider range. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1219IPWR | ADS1286UC/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 24 | 12 |
| Sampling Rate(Per Second) | 1k | 20k |
| Number of Inputs | 4 | 1 |
| Input Type | Differential, Single Ended | Differential |
| Data Interface | I²C | SPI |
| Configuration | MUX-ADC | S/H-ADC |
| Ratio - S / H: ADC | 0:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | SAR |
| Reference Type | External, Internal | External |
| Voltage - Supply, Analog | 2.3V ~ 5.5V | 5V |
| Voltage - Supply, Digital | 2.3V ~ 5.5V | 5V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Features | PGA | - |
The ADS1219IPWR is a 24-bit, 4-channel, delta-sigma ADC with an integrated programmable gain amplifier (PGA) and an I2C interface, housed in a TSSOP-16 package. The ADS1286UC/2K5 is a 12-bit, single-channel, successive-approximation register (SAR) ADC with a SPI interface, housed in a SOIC-8 package. The ADS1219IPWR targets high-resolution, multi-channel sensor measurement, while the ADS1286UC/2K5 targets faster, lower-resolution single-channel sampling.
No. The ADS1219IPWR uses a 16-pin TSSOP package, while the ADS1286UC/2K5 uses an 8-pin SOIC package. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for each other.
The ADS1219IPWR provides 24-bit resolution with programmable data rates up to 1 kSPS. The ADS1286UC/2K5 provides 12-bit resolution with a maximum sampling rate of 200 kSPS. The ADS1219IPWR is suited to high-resolution, low-speed measurements, whereas the ADS1286UC/2K5 is suited to lower-resolution, higher-speed sampling.
No. The ADS1219IPWR uses an I2C interface, while the ADS1286UC/2K5 uses a SPI interface. Firmware and host controller interface logic must be redesigned if migrating between these devices.
The ADS1219IPWR provides four input channels that can be configured as single-ended or differential inputs, with an integrated PGA. The ADS1286UC/2K5 is a single-channel SAR ADC with a pseudo-differential input configuration and no integrated PGA. Multi-channel applications require external multiplexing if using the ADS1286UC/2K5.
The ADS1219IPWR operates from an analog supply of 2.7 V to 5.5 V and a digital supply of 1.65 V to 5.5 V, with an external reference input. The ADS1286UC/2K5 operates from a single 5 V supply and requires an external reference voltage. Designers must verify reference drive and decoupling requirements against each datasheet.
No. Direct replacement is not possible due to differences in package, pin count, resolution, interface (I2C versus SPI), channel count, and supply requirements. Any migration requires schematic, layout, and firmware changes validated against the respective manufacturer datasheets.