ADS1210U
德州儀器
- Lifecycle
- Active
- Stock
- 5384 件
- Package
- SOIC-8
- Series
- 資料獲取-模數轉換器(ADC)
對 ADS1210U 和 ADS1286UCG4 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADS1210U and ADS1286UCG4 are not functionally interchangeable; they differ in resolution, architecture, interface, and package, so the ADS1286UCG4 cannot serve as a direct substitute for the ADS1210U in existing designs.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1210U | ADS1286UCG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 12 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit ADC offers far finer measurement granularity than a 12-bit device. |
| Architecture | Delta-Sigma | SAR | Delta-sigma converters excel at high-resolution low-frequency signals, while SAR converters offer faster sampling and lower latency, affecting application suitability. |
| Sampling Rate (max) | 10 kSPS | 20 kSPS | Maximum sampling rate defines the bandwidth of signals the ADC can digitize; the SAR part supports roughly twice the throughput. |
| Number of Input Channels | 1 (differential) | 1 (differential) | Both are single-channel differential devices, so channel count is not a differentiator, but input configuration affects wiring and signal conditioning. |
| Interface | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, simplifying digital connection to microcontrollers and FPGAs. |
| Supply Voltage | 5 V (analog and digital) | 5 V | Supply voltage compatibility ensures the part can drop into the same power rail without additional regulation. |
| Package | 18-pin SOIC (DIP-18 option) | 8-pin SOIC | Package footprint and pin count affect PCB layout and whether a direct board-level substitution is possible. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Matching industrial temperature ranges confirm both parts suit the same environmental conditions. |
| Internal Reference | No (external reference required) | No (external reference required) | Both require an external voltage reference, so reference design and accuracy considerations remain similar. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1210U | ADS1286UCG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Last Time Buy | Discontinued at Digi-Key |
| Number of Bits | 24 | 12 |
| Sampling Rate(Per Second) | 16k | 20k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | PGA-ADC | S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | SAR |
| Reference Type | External, Internal | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Features | PGA | - |
The ADS1210U is a 24-bit, 10-channel delta-sigma analog-to-digital converter with a programmable gain amplifier, SPI-compatible serial interface, and a maximum data rate of 15.6 kSPS, housed in a 24-pin SOIC package. The ADS1286UCG4 is a 12-bit, single-channel successive-approximation register (SAR) ADC with a serial interface and a maximum sampling rate of 200 kSPS, supplied in a 10-pin VSSOP package. They differ fundamentally in resolution, architecture, channel count, package, and throughput.
No. The ADS1210U uses a 24-pin SOIC (DW) package, while the ADS1286UCG4 uses a 10-pin VSSOP (DGS) package. The pin counts, pin functions, and PCB land patterns are different, so they are not drop-in replacements for one another.
The ADS1210U is a 24-bit delta-sigma converter, offering high resolution suitable for low-frequency, high-precision measurements. The ADS1286UCG4 is a 12-bit SAR converter, offering lower resolution but faster conversion suitable for higher-speed, lower-precision sampling applications.
The ADS1210U supports a maximum data rate of 15.6 kSPS. The ADS1286UCG4 supports a maximum sampling rate of 200 kSPS. The ADS1286UCG4 therefore provides a significantly higher throughput, while the ADS1210U trades speed for much higher resolution.
The ADS1210U provides a 10-channel input multiplexer, allowing multiple signal sources to be selected. The ADS1286UCG4 is a single-channel device with one analog input, so it cannot multiplex between multiple inputs without external circuitry.
Both devices operate from a single 5 V analog supply and use a serial digital interface for communication with a host controller. The ADS1210U uses an SPI-compatible serial interface, while the ADS1286UCG4 uses a serial interface compatible with SPI, QSPI, and MICROWIRE. Designers should confirm exact timing and logic-level requirements against the respective manufacturer datasheets.
The ADS1210U, with its 24-bit resolution, programmable gain amplifier, and multi-channel input, is suited to precision measurement applications such as industrial process control, weigh scales, and sensor signal conditioning. The ADS1286UCG4, with its 12-bit resolution and 200 kSPS throughput in a small 10-pin package, is suited to space-constrained, higher-speed applications such as portable instrumentation and general-purpose data acquisition where 12-bit precision is sufficient.
No. Because the two devices differ in resolution (12-bit vs 24-bit), architecture (SAR vs delta-sigma), channel count (1 vs 10), package (10-pin VSSOP vs 24-pin SOIC), and maximum data rate (200 kSPS vs 15.6 kSPS), a direct substitution is not possible. Any replacement would require a redesign of the PCB layout, signal chain, and firmware, followed by validation against the target system requirements.