ADS1110A1IDBVR vs ADS1110A0IDBVR

對 ADS1110A1IDBVR 和 ADS1110A0IDBVR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1110A0IDBVR and ADS1110A1IDBVR are functionally interchangeable 16-bit delta-sigma ADCs that share identical package, pinout, supply, and interface characteristics; the only distinction is the factory-programmed I2C slave address, so the A1 variant can directly replace the A0 variant provided the system firmware addresses the corresponding device address.

Resolution and ADC Architecture High match
Package and Pinout High match
Supply Voltage and Interface High match
I2C Slave Address Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1110A0IDBVR ADS1110A1IDBVR Why it matters
Manufacturer Texas Instruments Texas Instruments Same manufacturer ensures consistent quality, documentation, and support for both parts.
Resolution 16 bit 16 bit Resolution determines the smallest measurable signal change; both provide 16-bit precision.
Number of Channels 1 (single-ended or differential) 1 (single-ended or differential) Channel count defines how many signals can be measured; both support one input channel.
Interface Type I2C I2C Interface compatibility determines whether the part can be dropped into an existing bus design.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Supply range must match the system rail; both support the same wide voltage range.
Package / Mounting SOT-23-6, Surface Mount SOT-23-6, Surface Mount Package and mounting style affect PCB footprint and assembly compatibility.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range determines suitability for industrial and harsh-environment applications.
Gain / PGA Setting Fixed gain (A0 variant) Fixed gain (A1 variant) The A0 and A1 suffixes denote different factory-programmed gain configurations, which directly affect input signal scaling and measurement range.
Data Rate Configurable (up to 128 SPS) Configurable (up to 128 SPS) Data rate affects measurement speed versus noise trade-off; both offer the same configurable rates.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1110A1IDBVR ADS1110A0IDBVR
Part Status Active Active
Number of Bits 16 16
Sampling Rate(Per Second) 240 240
Number of Inputs 1 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface I²C I²C
Configuration PGA-ADC PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type Internal Internal
Voltage - Supply, Analog 2.7V ~ 5.5V 2.7V ~ 5.5V
Voltage - Supply, Digital 2.7V ~ 5.5V 2.7V ~ 5.5V
Features PGA, Selectable Address PGA, Selectable Address
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C

Frequently asked questions

What is the difference between the ADS1110A0IDBVR and the ADS1110A1IDBVR?

The ADS1110A0IDBVR and ADS1110A1IDBVR are both 16-bit delta-sigma ADCs from Texas Instruments in a SOT-23-6 package, but they differ in their factory-programmed I2C slave addresses. The A0 version has a fixed I2C address of 1001000 (0x48), while the A1 version has a fixed I2C address of 1001001 (0x49). This allows both devices to coexist on the same I2C bus without address conflict.

Are the ADS1110A0IDBVR and ADS1110A1IDBVR functionally identical apart from the I2C address?

Yes. Both devices share the same core specifications: 16-bit resolution, on-board reference, PGA, oscillator, and I2C interface, with data rates of 15, 30, 60, or 240 SPS and a supply range of 2.7 V to 5.5 V. The only documented difference between the A0 and A1 variants is the I2C slave address.

Can the ADS1110A0IDBVR and ADS1110A1IDBVR be used together on the same I2C bus?

Yes. Because the A0 variant uses I2C address 0x48 and the A1 variant uses 0x49, both can be connected to the same I2C bus and addressed independently, provided the bus master supports both addresses and the total bus capacitance and pull-up requirements are met.

What is the resolution and data rate of the ADS1110A0IDBVR and ADS1110A1IDBVR?

Both devices provide 16-bit resolution with no missing codes and support programmable data rates of 15, 30, 60, and 240 samples per second (SPS), selectable via the configuration register.

What supply voltage and package do the ADS1110A0IDBVR and ADS1110A1IDBVR use?

Both variants operate from a single supply of 2.7 V to 5.5 V and are supplied in a 6-pin SOT-23 (DBV) package, identified by the IDBVR suffix in the orderable part number.

Do the ADS1110A0IDBVR and ADS1110A1IDBVR include an internal reference and PGA?

Yes. Both devices integrate an on-chip 2.048 V reference and a programmable gain amplifier (PGA) with selectable gains of 1, 2, 4, and 8, allowing differential input ranges from ±2.048 V down to ±0.256 V.

Can the ADS1110A0IDBVR be substituted with the ADS1110A1IDBVR in an existing design?

Only if the system firmware is updated to use the A1 I2C address (0x49) instead of the A0 address (0x48). The electrical, package, and functional specifications are otherwise the same, so substitution is possible after validating the address change against the design's firmware and bus configuration.