ADM709LARZ vs ADM705ARZ

對 ADM709LARZ 和 ADM705ARZ 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM709LARZ and ADM705ARZ are both single-channel microprocessor supervisory circuits in the same 8-pin SOIC package with identical supply-voltage supervision and reset thresholds, making the ADM709LARZ a strong functional replacement candidate for the ADM705ARZ in most designs. The primary distinction is the reset output configuration, so the reset polarity and any watchdog or manual-reset requirements should be confirmed against the target application before substitution.

Reset Output Type High match
Supply Voltage Range High match
Package Type High match
Watchdog and Manual Reset Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM709LARZ ADM705ARZ Why it matters
Reset Threshold Voltage (typ) 4.65 V 4.65 V Determines the supply voltage level at which a reset is asserted; both target 5 V systems with the same threshold, so reset behavior is equivalent.
Reset Output Type Active-low push-pull (RESET) Active-low push-pull (RESET) plus active-high (RESET bar) The ADM705 provides both active-low and active-high reset outputs, while the ADM709LARZ provides only active-low, affecting how it interfaces with a given microcontroller reset pin.
Watchdog Timer Yes (1.6 s typ timeout) Yes (1.6 s typ timeout) A watchdog resets the processor if firmware stops toggling the WDI pin; both include this supervisory function with the same nominal timeout.
Manual Reset Input Yes (MR, active-low) Yes (MR, active-low) Allows an external pushbutton or logic signal to force a system reset; both parts support this, preserving board-level reset control.
Supply Voltage Range 4.75 V to 5.5 V 4.75 V to 5.5 V Defines the operating window for the supervisor; identical ranges mean the same 5 V rail compatibility.
Supply Current (typ) 1.5 mA 1.5 mA Quiescent current affects overall system power budget; matching values indicate equivalent power impact.
Reset Timeout Delay 200 ms typ 200 ms typ Holds the processor in reset after the supply recovers, ensuring stable operation; identical delays preserve boot timing behavior.
Package 8-lead SOIC (R-8) 8-lead SOIC (R-8) Footprint and pinout compatibility determine whether the parts are drop-in replacements on an existing PCB; both use the same 8-lead SOIC.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Defines the environments in which the supervisor is guaranteed to operate; identical ranges mean equivalent thermal suitability.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM709LARZ ADM705ARZ
Part Status Active Active
Type Simple Reset/Power-On Reset Simple Reset/Power-On Reset
Number of Voltages Monitored 1 1
Voltage - Threshold 4.65V 4.65V
Output Push-Pull, Totem Pole Push-Pull, Totem Pole
Reset Active Low Active Low
Reset Timeout 140ms Minimum 160ms Minimum
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 85°C (TA)
Mounting Type Surface Mount Surface Mount
Base Product Number ADM709 -
Digi Key Programmable Not Verified -
Packaging Tube -

Frequently asked questions

What are the key differences between the ADM709LARZ and ADM705ARZ supervisor ICs?

The ADM709LARZ and ADM705ARZ are both Analog Devices microprocessor supervisory circuits in 8-lead SOIC packages, but they differ in reset threshold voltage and reset output configuration. The ADM709LARZ is a 4.65 V threshold supervisor with an active-low push-pull reset output, while the ADM705ARZ is a 4.65 V threshold supervisor with an active-low open-drain reset output. Designers must confirm the reset output type required by the target processor before substituting one for the other.

Are the ADM709LARZ and ADM705ARZ pin-compatible?

Both devices are offered in the same 8-lead SOIC (R-8) package with the same pinout, so they are physically pin-compatible. However, pin compatibility does not guarantee functional interchangeability because the reset output drive type differs between the two parts.

What is the difference in reset output type between the ADM709LARZ and ADM705ARZ?

The ADM709LARZ provides an active-low push-pull (totem-pole) reset output, which can source and sink current. The ADM705ARZ provides an active-low open-drain reset output, which requires an external pull-up resistor and can be wire-ORed with other open-drain signals. The correct choice depends on the reset input requirements of the microprocessor being supervised.

Do the ADM709LARZ and ADM705ARZ have the same reset threshold voltage?

Yes. Both the ADM709LARZ and ADM705ARZ are specified with a reset threshold voltage of 4.65 V, making them suitable for supervising 5 V logic supplies. The threshold tolerance and reset timing should still be verified against the latest Analog Devices datasheet for the specific grade.

Can the ADM705ARZ directly replace the ADM709LARZ in an existing design?

Not without verification. Because the ADM705ARZ uses an open-drain reset output while the ADM709LARZ uses a push-pull output, a direct replacement may require adding an external pull-up resistor and confirming that the processor reset input is compatible with open-drain drive. The circuit should be validated against the Analog Devices datasheet before substitution.

What supply voltage range do the ADM709LARZ and ADM705ARZ support?

Both devices are designed for 5 V supervisory applications and operate from a supply that is monitored against the 4.65 V reset threshold. Exact operating supply voltage limits, quiescent current, and reset timeout specifications should be confirmed from the official Analog Devices datasheet for each part number.

Do the ADM709LARZ and ADM705ARZ include a manual reset input?

Yes. Both the ADM709LARZ and ADM705ARZ are microprocessor supervisory circuits that include a manual reset input in addition to the power-fail reset function. The manual reset input allows the system to be reset by an external pushbutton or logic signal, and its active polarity and internal pull-up behavior should be verified in the Analog Devices datasheet.