ADM489ARZ vs ADM4852AR

對 ADM489ARZ 和 ADM4852AR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM489ARZ and ADM4852AR are both half-duplex RS-485/RS-422 transceivers in an 8-lead SOIC package with a 5 V supply and similar data rates, making the ADM4852AR a viable functional replacement candidate for the ADM489ARZ in many designs. However, the ADM489ARZ integrates a proprietary RS-485 driver with a wider common-mode range and full fail-safe receiver behavior, while the ADM4852AR offers a standard pinout with a lower unit-load receiver input and different ESD and fail-safe characteristics. Designers should validate receiver fail-safe behavior, common-mode performance, and ESD robustness against the specific bus environment before substituting.

Package Type High match
Supply Voltage High match
Data Rate Validation required
Receiver Fail-Safe and Common-Mode Range Not compatible

Parts at a glance

Part A

ADM489ARZ

ADI公司

Lifecycle
Active
Stock
3659 件
Package
SOIC-14
Series
介面-驅動器、接收器、收發器
Part B

ADM4852AR

ADI公司

Lifecycle
Active
Stock
3236 件
Package
SOIC-8
Series
介面-驅動器、接收器、收發器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM489ARZ ADM4852AR Why it matters
Data Rate 250 kbps 2.5 Mbps Maximum signaling speed; the ADM4852AR supports roughly 10x higher throughput, so it can serve faster buses while the ADM489ARZ is limited to lower-speed networks.
Duplex Mode Full duplex Half duplex Full duplex allows simultaneous transmit and receive (four-wire bus), while half duplex shares one pair; this fundamentally changes wiring and whether the parts are drop-in substitutes.
Number of Drivers / Receivers 1 driver / 1 receiver 1 driver / 1 receiver Transceiver channel count determines bus topology compatibility; both are single-channel, so this aspect is equivalent.
Supply Voltage 5 V 5 V Operating supply rail must match the system power domain; both run from a single 5 V supply, so power design is compatible.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Industrial temperature range affects suitability for harsh environments; identical ranges mean equal environmental robustness.
Mounting / Package Surface mount, 14-lead SOIC Surface mount, 8-lead SOIC Package footprint and pin count must match the PCB layout; the different SOIC sizes mean they are not footprint-compatible without a board redesign.
Receiver Input Impedance (Unit Loads) 1 unit load (standard RS-485) 1 unit load (standard RS-485) Unit-load rating determines how many nodes can share a bus; both being 1 unit load allows up to 32 standard nodes.
Fail-Safe Receiver Yes (open-circuit fail-safe) Yes (open-circuit fail-safe) Fail-safe biasing guarantees a defined logic state when the bus is idle or disconnected, preventing spurious data; both provide this feature.
ESD Protection (Bus Pins) ±15 kV (HBM, bus pins) ±15 kV (HBM, bus pins) Bus-pin ESD robustness affects field reliability in exposed cabling; equal ratings mean comparable protection levels.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM489ARZ ADM4852AR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Voltage - Supply 4.5V ~ 5.5V 4.75V ~ 5.25V
Mounting Type Surface Mount Surface Mount
Duplex Full -
Receiver Hysteresis 70 mV -
Data Rate 250kbps -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the primary functional differences between the ADM489ARZ and the ADM4852AR?

The ADM489ARZ is a 5 V, low-power, full-duplex RS-485/RS-422 transceiver specified for data rates up to 250 kbps, while the ADM4852AR is a 5 V, half-duplex RS-485/RS-422 transceiver rated for data rates up to 2.5 Mbps. The ADM489ARZ provides separate driver and receiver enable pins for full-duplex operation, whereas the ADM4852AR uses a single direction-control pin for half-duplex operation.

Are the ADM489ARZ and ADM4852AR pin-compatible?

No. The ADM489ARZ is supplied in a 14-lead SOIC package with separate driver and receiver enable pins and dedicated full-duplex A/B and Y/Z bus pins, while the ADM4852AR is supplied in an 8-lead SOIC package with a single DE/RE direction pin and half-duplex A/B bus pins. The pin counts and pin functions differ, so they are not drop-in replacements.

Can the ADM489ARZ and ADM4852AR be used interchangeably in an existing RS-485 design?

No, not without design changes. The ADM489ARZ supports full-duplex communication with independent driver and receiver enables, while the ADM4852AR supports half-duplex communication with a single direction-control pin. Bus wiring, PCB footprint, and firmware control logic must be revalidated before substituting one for the other.

What are the maximum data rates of the ADM489ARZ and ADM4852AR?

The ADM489ARZ is specified for data rates up to 250 kbps. The ADM4852AR is specified for data rates up to 2.5 Mbps. The higher rate of the ADM4852AR makes it suitable for faster half-duplex buses, while the ADM489ARZ targets lower-speed full-duplex applications.

Do both devices operate from a single 5 V supply?

Yes. Both the ADM489ARZ and the ADM4852AR are specified for operation from a single 5 V ±5% supply, consistent with the standard RS-485/RS-422 supply rail.

How do the receiver input characteristics compare between the ADM489ARZ and ADM4852AR?

Both devices feature RS-485/RS-422-compliant differential receiver inputs with a common-mode range of -7 V to +12 V and a receiver input sensitivity of ±200 mV, allowing detection of differential signals as low as 200 mV over the specified common-mode range.

What package options are available for the ADM489ARZ and ADM4852AR?

The ADM489ARZ is offered in a 14-lead SOIC package (the "RZ" suffix denotes RoHS-compliant SOIC). The ADM4852AR is offered in an 8-lead SOIC package (the "AR" suffix denotes SOIC). Package selection should be based on the required duplex mode and pin count.

Which device should be selected for a full-duplex RS-485 bus?

The ADM489ARZ should be selected for full-duplex RS-485/RS-422 buses because it provides independent driver and receiver enable control and separate transmit and receive bus pairs. The ADM4852AR is a half-duplex device and is not suitable for full-duplex bus topologies without external multiplexing.