ADM3485EAR
ADI公司
- Lifecycle
- Active
- Stock
- 3150 件
- Package
- SOIC-8
- Series
- 介面-驅動器、接收器、收發器
對 ADM3485EAR 和 ADM3483EARZ 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADM3483EARZ and ADM3485EAR are both 3.3 V half-duplex RS-485/RS-422 transceivers in the same 8-lead SOIC package with identical pinout, making them strong functional replacement candidates. The ADM3485EAR offers a higher maximum data rate (12 Mbps versus 250 kbps) and a wider receiver input common-mode range, while the ADM3483EARZ provides a lower slew-rate-limited option for reduced EMI. Designers should confirm data-rate requirements and bus loading before substituting.
ADI公司
ADI公司
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3483EARZ | ADM3485EAR | Why it matters |
|---|---|---|---|
| Data Rate | 250 kbps | 10 Mbps | Determines the maximum communication speed the transceiver can support; a 40x difference affects whether the part suits low-speed or high-speed bus designs. |
| Number of Drivers/Receivers | 1/1 | 1/1 | Defines the half-duplex configuration; both are single-driver/single-receiver, so bus topology compatibility is equivalent. |
| Duplex Mode | Half-duplex | Half-duplex | Half-duplex operation uses a single twisted pair; both parts match, so wiring and protocol requirements are the same. |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | Both operate from a 3.3 V nominal rail, allowing direct substitution in 3.3 V systems without supply redesign. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical industrial temperature range means both are suitable for the same environmental conditions. |
| Package / Mounting | 8-SOIC (Surface Mount) | 8-SOIC (Surface Mount) | Same package and footprint allow drop-in PCB replacement without layout changes. |
| ESD Protection (Bus Pins) | ±15 kV (HBM) | ±15 kV (HBM) | Equivalent ESD robustness on the RS-485 bus pins ensures comparable field reliability. |
| Receiver Input Impedance (Unit Load) | 1 unit load (12 kΩ) | 1 unit load (12 kΩ) | Both present one unit load, so the same number of nodes (up to 32) can share the bus. |
| Fail-Safe Receiver | Yes (open/short fail-safe) | Yes (open/short fail-safe) | Fail-safe receivers guarantee a defined logic state on floating or terminated bus lines, preventing spurious data; both provide this. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3485EAR | ADM3483EARZ |
|---|---|---|
| Part Status | Obsolete | Active |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex | Half | Half |
| Receiver Hysteresis | 50 mV | 50 mV |
| Data Rate | 10Mbps | 250kbps |
| Voltage - Supply | 3V ~ 3.6V | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The ADM3483EARZ and ADM3485EAR are both 3.3 V, half-duplex RS-485/RS-422 transceivers from Analog Devices in an 8-lead SOIC package. The key difference is the data rate: the ADM3483E is specified for 250 kbps, while the ADM3485E is specified for 12 Mbps. Both share the same pinout and supply range, but the ADM3485E supports much higher signaling rates for faster bus applications.
Yes. Both devices are offered in the same 8-lead SOIC (R-8) package with an identical pinout: RO, RE, DE, DI, GND, A, B, and VCC. This allows a board designed for one part to accept the other without layout changes, provided the data-rate and bus-loading requirements are satisfied.
Both transceivers operate from a single 3.3 V supply. The specified supply voltage range is 3.0 V to 3.6 V, making them suitable for 3.3 V logic systems and mixed-supply designs that require RS-485/RS-422 interfacing.
The ADM3483EARZ is rated for a maximum data rate of 250 kbps, while the ADM3485EAR is rated for 12 Mbps. The higher rate of the ADM3485E supports faster bus communication but may require more careful attention to bus termination, stub length, and signal integrity.
Yes. Both the ADM3483EARZ and ADM3485EAR are half-duplex transceivers compliant with RS-485 and RS-422 signaling. They feature a differential driver and receiver with enable controls (DE and RE) for bus sharing in multi-point and point-to-point networks.
Both the ADM3483EARZ and ADM3485EAR provide a 1/8-unit load receiver input impedance, allowing up to 256 transceivers to be connected to a single RS-485 bus. This high input impedance supports large multi-drop networks without exceeding the standard unit-load limit.
Yes. Both devices are members of the ADM3483E/ADM3485E family, which includes enhanced ESD protection on the RS-485 bus pins (A and B). The bus pins are protected against electrostatic discharge events, supporting robust operation in industrial environments. Designers should consult the official Analog Devices datasheet for the exact ESD test levels and conditions.
Because the two parts are pin-compatible and share the same 3.3 V supply and half-duplex RS-485/RS-422 interface, the ADM3485EAR can generally be used in place of the ADM3483EARZ when the higher 12 Mbps data rate is acceptable or desired. However, the replacement should be validated against the bus topology, termination, cable length, and EMI requirements, since the faster edge rates of the ADM3485E may affect signal integrity.