ADM3202ARN vs ADM3202ARW

對 ADM3202ARN 和 ADM3202ARW 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM3202ARN and ADM3202ARW are functionally equivalent RS-232 transceivers sharing identical electrical characteristics, driver/receiver counts, and supply voltage requirements; the only material distinction is the package outline (narrow-body SOIC vs. wide-body SOIC), which affects PCB footprint but not circuit behavior. Designers can treat them as interchangeable for signal-chain purposes provided the board layout accommodates the respective package width.

Function and Protocol High match
Driver/Receiver Count High match
Supply Voltage High match
Package Type Validation required

Parts at a glance

Part A

ADM3202ARN

ADI公司

Lifecycle
Active
Stock
3772 件
Package
SOIC-16
Series
介面-驅動器、接收器、收發器
Part B

ADM3202ARW

ADI公司

Lifecycle
Active
Stock
8835 件
Package
SOIC-16
Series
介面-驅動器、接收器、收發器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3202ARN ADM3202ARW Why it matters
Package / Case 16-Lead SOIC (Narrow, 3.90 mm body) 16-Lead SOIC (Wide, 7.50 mm body) The package footprint and body width differ, so the two parts are not drop-in replacements on the same PCB land pattern.
Mounting Type Surface Mount Surface Mount Both are surface-mount devices, but the differing package width still affects board layout compatibility.
Supplier Device Package 16-SOIC 16-SOIC (Wide) Assembly and reflow profiles must match the specific package outline; the wide-body variant requires different pad geometry.
Number of Drivers/Receivers 2/2 2/2 Identical transceiver channel count ensures the same interface capability for RS-232 communication.
Data Rate 460 kbps 460 kbps Matching maximum data rate confirms equivalent throughput for the serial link.
Operating Supply Voltage 3.0 V to 5.5 V 3.0 V to 5.5 V Same supply range means both parts work in identical 3.3 V or 5 V system rails.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Identical temperature ratings ensure the same environmental robustness in the target application.
Protocol RS-232 RS-232 Both implement the same RS-232 protocol, preserving interface compatibility.
Duplex Full Full Full-duplex operation on both parts supports simultaneous transmit and receive.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3202ARN ADM3202ARW
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Obsolete Obsolete
Type Transceiver Transceiver
Protocol RS232 RS232
Number of Drivers/Receivers 2/2 2/2
Duplex Full Full
Receiver Hysteresis 400 mV 400 mV
Data Rate 460Kbps 460Kbps
Voltage - Supply 3V ~ 5.5V 3V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the primary difference between the ADM3202ARN and ADM3202ARW?

The primary difference is the package type: the ADM3202ARN is supplied in a 16-lead narrow-body SOIC (N-16-1) package, while the ADM3202ARW is supplied in a 16-lead wide-body SOIC (RW-16) package. Both are dual-channel RS-232 line drivers/receivers from Analog Devices with the same electrical core.

Are the ADM3202ARN and ADM3202ARW electrically identical?

Yes. Both variants share the same datasheet specifications: 3.0 V to 5.5 V single-supply operation, two drivers and two receivers, data rates up to 460 kbps, and compliance with EIA-232-E and V.28/V.24 standards. The silicon die and electrical performance are the same; only the package body width differs.

Can the ADM3202ARN and ADM3202ARW be used interchangeably on the same PCB?

No, not without a layout change. The narrow-body SOIC (ARN) and wide-body SOIC (ARW) have different package widths and lead spans, so the PCB land patterns are not compatible. A board designed for one package will not accept the other without redesigning the footprint.

What are the operating temperature ranges for these devices?

Both the ADM3202ARN and ADM3202ARW are specified over the industrial temperature range of −40°C to +85°C, as stated in the Analog Devices datasheet.

Do the ADM3202ARN and ADM3202ARW require external charge-pump capacitors?

Yes. Both devices use on-chip charge-pump circuitry to generate RS-232 voltage levels from a single 3.0 V to 5.5 V supply, and they require external capacitors. The datasheet specifies four 0.1 µF capacitors (or larger, depending on the supply voltage) for the charge pump.

What data rate do the ADM3202ARN and ADM3202ARW support?

Both variants support data rates up to 460 kbps, per the Analog Devices datasheet, while maintaining EIA-232-E and V.28/V.24 compliance.

Which package should be selected for a new design, the ADM3202ARN or ADM3202ARW?

Selection depends on board space and layout constraints. The narrow-body SOIC (ARN) occupies less board width and is preferred where space is tight, while the wide-body SOIC (ARW) offers a larger lead span that may suit existing layouts or specific assembly requirements. Both are electrically equivalent, so the choice is purely mechanical.