ADM3050EBRWZ
ADI公司
- Lifecycle
- Active
- Stock
- 5661 件
- Package
- SOIC-16
- Series
- 介面-驅動器、接收器、收發器
對 ADM3050EBRWZ 和 ADM3076EARZ 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADM3076EARZ and ADM3050EBRWZ are both isolated RS-485 transceivers from Analog Devices, but they differ in isolation technology, data rate, and package. The ADM3050EBRWZ offers higher data rates and reinforced isolation, while the ADM3076EARZ provides a lower-speed, lower-cost option. Designers should validate supply voltage, bus loading, and isolation requirements before substituting one for the other.
ADI公司
ADI公司
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3076EARZ | ADM3050EBRWZ | Why it matters |
|---|---|---|---|
| Function / Protocol | RS-485/RS-422 transceiver | Isolated CAN transceiver (CAN FD capable) | These devices serve entirely different bus protocols, so they are not functionally interchangeable in a given network. |
| Isolation | Non-isolated | Galvanically isolated (5 kV rms) | Isolation determines safety, ground-loop immunity, and suitability for harsh or high-voltage environments. |
| Data Rate | Up to 16 Mbps | Up to 12 Mbps (CAN FD) | Maximum data rate must match the bus speed requirements of the application. |
| Supply Voltage | 3.3 V single supply | 5 V (VCC) with 3.3 V/5 V logic supply (VIO) | Supply voltage compatibility affects power rail design and logic-level interfacing. |
| Duplex / Channel Type | Full-duplex RS-485 | Half-duplex CAN (single channel) | Duplex configuration determines wiring topology and whether simultaneous transmit/receive is possible. |
| Package | 8-lead SOIC (R-8) | 16-lead SOIC (RW-16) | Package footprint and pin count must match the PCB layout for a drop-in replacement. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +105 °C | Temperature range affects reliability in industrial and automotive environments. |
| ESD Protection (Bus Pins) | ±15 kV (HBM) on bus pins | ±10 kV (IEC 61000-4-2) on bus pins | ESD robustness influences field reliability and the need for external protection components. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3050EBRWZ | ADM3076EARZ |
|---|---|---|
| Series | iCoupler® | - |
| Part Status | Active | Active |
| Type | Transceiver, Isolated | Transceiver |
| Protocol | CAN | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Data Rate | 12Mbps | 16Mbps |
| Voltage - Supply | 0.5V ~ 6V | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Duplex | - | Full |
| Receiver Hysteresis | - | 100 mV |
The ADM3076EARZ is a 3.3 V, ±15 kV ESD protected, half-duplex RS-485/RS-422 transceiver specified for data rates up to 16 Mbps. The ADM3050EBRWZ is a 5 kV rms isolated, CAN FD transceiver compliant with ISO 11898-2:2016, supporting data rates up to 12 Mbps. They serve different bus protocols (RS-485 vs. CAN) and are not functionally interchangeable.
No. The ADM3076EARZ is offered in an 8-lead SOIC_N package, while the ADM3050EBRWZ is offered in a 16-lead SOIC_W package with different pin functions. The pinouts, package widths, and PCB land patterns differ, so they cannot be dropped into the same footprint.
The ADM3076EARZ operates from a single 3.3 V supply (3.0 V to 3.6 V). The ADM3050EBRWZ requires two supplies: VCC1 (1.7 V to 5.5 V) on the logic side and VCC2 (4.5 V to 5.5 V) on the isolated bus side, with an integrated isolated DC-to-DC converter.
The ADM3050EBRWZ provides 5 kV rms galvanic isolation between the logic side and the CAN bus side, rated per UL 1577 and CSA. The ADM3076EARZ is a non-isolated RS-485/RS-422 transceiver and does not provide galvanic isolation; external isolation would be required if needed.
The ADM3076EARZ supports RS-485 and RS-422 half-duplex communication at data rates up to 16 Mbps. The ADM3050EBRWZ supports CAN FD per ISO 11898-2:2016 at data rates up to 12 Mbps. The two devices target different fieldbus standards and cannot communicate directly with each other.
The ADM3076EARZ specifies ±15 kV ESD protection on the RS-485 bus pins using the human body model (HBM). The ADM3050EBRWZ specifies bus-pin ESD protection per the IEC 61000-4-2 standard; designers should consult the respective datasheets for the exact tested levels and conditions.
No. The ADM3076EARZ is an RS-485/RS-422 transceiver and does not implement the CAN or CAN FD differential signaling, arbitration, or ISO 11898-2 physical layer required for a CAN network. A CAN application requiring isolation should use the ADM3050EBRWZ or an equivalent isolated CAN transceiver.
Both the ADM3076EARZ and the ADM3050EBRWZ are specified over the industrial temperature range of −40 °C to +85 °C. Designers should confirm the exact grade and suffix against the manufacturer datasheet for the specific orderable part number.