ADM242AR vs ADM241LAR

對 ADM242AR 和 ADM241LAR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM241LAR is a functionally compatible replacement candidate for the ADM242AR, sharing the same RS-232 transceiver function, dual driver/receiver channel count, and 16-pin SOIC package. Designers should validate the lower data rate (120 kbps vs 200 kbps) and confirm the reduced external capacitor configuration meets the target application's timing and charge-pump requirements before committing to production.

Function and Interface Type High match
Channel Count High match
Data Rate Validation required
External Capacitor Configuration Validation required

Parts at a glance

Part A

ADM242AR

ADI公司

Lifecycle
Active
Stock
6746 件
Package
SOIC-18
Series
介面-驅動器、接收器、收發器
Part B

ADM241LAR

ADI公司

Lifecycle
Active
Stock
3501 件
Package
SOIC-28
Series
介面-驅動器、接收器、收發器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM242AR ADM241LAR Why it matters
Number of Drivers 2 4 Determines how many RS-232 transmit lines the device can drive; a functional substitute must match the required channel count.
Number of Receivers 2 5 Determines how many RS-232 receive lines are supported; mismatched receiver count affects interface compatibility.
Data Rate 200 kbps 120 kbps Maximum signaling speed; must meet the baud rate requirements of the target serial link.
External Charge Pump Capacitors 4 (0.1 µF) 4 (0.1 µF) Both require external capacitors for the internal charge pump; the count and value affect board layout and BOM.
Shutdown / Enable Control Yes Yes Shutdown capability allows power savings when the interface is idle; both parts support it.
Operating Supply Voltage 5 V 5 V Single 5 V supply compatibility is essential for direct substitution in existing designs.
Package 24-pin SOIC (wide) 28-pin SOIC (wide) Footprint and pin count must match the PCB layout; different packages require board redesign.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Industrial temperature range ensures reliable operation across the application's environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM242AR ADM241LAR
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Obsolete Obsolete
Type Transceiver Transceiver
Protocol RS232 RS232
Number of Drivers/Receivers 2/2 4/5
Duplex Full Full
Receiver Hysteresis 400 mV 650 mV
Data Rate 200kbps 120Kbps
Voltage - Supply 4.5V ~ 5.5V 4.75V ~ 5.25V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the ADM242AR and ADM241LAR?

Both are dual-channel RS-232 line drivers/receivers from Analog Devices in a 24-lead SOIC package. The ADM242AR integrates two charge pump capacitors (using 0.1 µF external capacitors) and operates from a single +5 V supply, while the ADM241LAR requires four external 0.1 µF charge pump capacitors. The ADM241LAR is specified for a lower data rate (up to 120 kbps) and features a low-power shutdown mode, whereas the ADM242AR supports data rates up to 200 kbps.

Are the ADM242AR and ADM241LAR pin-compatible?

No. Although both devices are housed in a 24-lead SOIC package, their pinouts differ. The ADM242AR uses an internal charge pump architecture requiring only two external capacitors, which changes the function of several pins compared to the ADM241LAR, which requires four external charge pump capacitors. A direct drop-in replacement is not possible without PCB layout changes.

What data rate does each device support?

The ADM242AR is specified for data rates up to 200 kbps. The ADM241LAR is specified for data rates up to 120 kbps. Both meet or exceed the EIA-232-E and V.28 specifications.

Do both devices operate from a single +5 V supply?

Yes. Both the ADM242AR and ADM241LAR operate from a single +5 V ±10% power supply and generate the required RS-232 voltage levels internally via on-chip charge pump converters.

Does the ADM241LAR have a shutdown feature that the ADM242AR lacks?

Yes. The ADM241LAR includes a low-power shutdown mode that reduces supply current to typically 15 µA when the device is not in use. The ADM242AR does not provide this shutdown feature.

How many external charge pump capacitors does each device require?

The ADM242AR requires only two external 0.1 µF charge pump capacitors. The ADM241LAR requires four external 0.1 µF charge pump capacitors. This difference affects board space and layout complexity.

What is the typical supply current for each device?

The ADM242AR typically draws 8 mA of supply current. The ADM241LAR typically draws 6 mA in normal operation and approximately 15 µA in shutdown mode. These values are based on manufacturer datasheet specifications.

Can the ADM242AR and ADM241LAR be used interchangeably in an existing design?

No. Due to differences in pinout, external capacitor count, data rate, and shutdown functionality, the two devices are not interchangeable without redesigning the PCB layout and verifying all electrical parameters against the target application requirements.