ADF4107BRU
ADI公司
- Lifecycle
- Active
- Stock
- 2399 件
- Series
- 時鐘定時-時鐘發生器、PLL、頻率合成器
對 ADF4107BRU 和 ADF4153BRU 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADF4107BRU and ADF4153BRU are both single PLL frequency synthesizers in a 16-lead TSSOP package with a compatible 3-wire serial interface and overlapping 2.7 V to 3.3 V supply range, making the ADF4153BRU a viable functional replacement candidate for the ADF4107BRU in many designs. However, the two devices differ in maximum operating frequency, modulus resolution, and phase detector characteristics, so the replacement must be validated against the target loop bandwidth, frequency plan, and phase noise budget before adoption.
ADI公司
ADI公司
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADF4107BRU | ADF4153BRU | Why it matters |
|---|---|---|---|
| Maximum RF Input Frequency | 4 GHz | 4 GHz | Determines the highest frequency the PLL synthesizer can operate at; both support up to 4 GHz. |
| Number of Programmable Modulus Bits (Fractional) | Integer-N only | Fractional-N (25-bit) | Fractional-N capability allows finer frequency resolution and lower phase noise compared to integer-N architectures. |
| Phase Detector Frequency | Up to 104 MHz | Up to 32 MHz | Higher phase detector frequency generally enables faster lock times and lower in-band phase noise. |
| Supply Voltage Range | 2.7 V to 3.3 V | 2.7 V to 3.3 V | Both operate over the same supply range, allowing similar power supply design. |
| Package | 16-Lead TSSOP | 16-Lead TSSOP | Identical package footprint enables drop-in board compatibility. |
| Charge Pump Current | Programmable (up to 5 mA) | Programmable (up to 5 mA) | Charge pump current affects loop filter design and lock time; both offer programmable current up to 5 mA. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Both support industrial temperature ranges, suitable for the same environments. |
| Interface | 3-wire SPI | 3-wire SPI | Same serial interface simplifies firmware and microcontroller compatibility. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADF4107BRU | ADF4153BRU |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Obsolete | Obsolete |
| Type | Clock/Frequency Synthesizer (RF) | Fractional N Synthesizer (RF) |
| PLL | Yes | Yes |
| Input | CMOS, TTL | CMOS, TTL |
| Output | Clock | Clock |
| Number of Circuits | 1 | 1 |
| Ratio - Input: Output | 2:1 | 2:1 |
| Differential - Input: Output | Yes/No | Yes/No |
| Frequency - Max | 7GHz | 4GHz |
| Divider / Multiplier | No/No | No/Yes |
| Voltage - Supply | 2.7V ~ 3.3V | 2.7V ~ 3.3V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Base Product Number | ADF4107 | - |
| Digi Key Programmable | Not Verified | - |
| Packaging | Tube | - |
The ADF4107BRU is an integer-N PLL frequency synthesizer with an integrated prescaler, operating up to 7 GHz, while the ADF4153BRU is a fractional-N PLL synthesizer operating up to 4 GHz. The ADF4153BRU supports fractional-N operation for finer frequency resolution, whereas the ADF4107BRU uses integer-N architecture.
Both devices are offered in a 16-lead TSSOP package (RU suffix). However, pin functions and register maps differ between the two devices, so they are not pin-for-pin drop-in replacements despite sharing the same package outline.
The ADF4107BRU supports RF input frequencies up to 7 GHz. The ADF4153BRU supports RF input frequencies up to 4 GHz. Designs requiring operation above 4 GHz must use the ADF4107BRU or another device rated for the target frequency.
The ADF4153BRU is a fractional-N PLL synthesizer, allowing finer frequency step resolution than integer-N architectures. The ADF4107BRU is an integer-N synthesizer and does not provide fractional-N operation.
No. The two devices have different register maps and programming interfaces. Firmware and register configurations written for one device cannot be reused directly for the other without modification according to the respective datasheets.
Not directly. Although both are 16-lead TSSOP devices, differences in maximum operating frequency (4 GHz vs 7 GHz), PLL architecture (fractional-N vs integer-N), and register maps require design and firmware validation before any substitution.
Both the ADF4107BRU and ADF4153BRU operate from a nominal 3 V supply, with an operating range of 2.7 V to 3.3 V as specified in their respective manufacturer datasheets.