ADF4002BCPZ-RL7
ADI公司
- Lifecycle
- Active
- Stock
- 7422 件
- Package
- WFQFN-20
- Series
- 時鐘定時-時鐘發生器、PLL、頻率合成器
對 ADF4002BCPZ-RL7 和 ADF4007BCP 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The ADF4002BCPZ-RL7 and ADF4007BCP are both integer-N PLL frequency synthesizers in a 20-lead LFCSP package with a shared 3-wire serial interface and comparable supply requirements, making them a viable functional replacement candidate. However, the ADF4007BCP integrates an on-chip VCO and prescaler architecture optimized for fixed high-frequency synthesis, while the ADF4002BCPZ-RL7 is a standalone PLL synthesizer requiring an external VCO, so the designer must validate loop filter, reference, and RF front-end differences before substitution.
ADI公司
ADI公司
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADF4002BCPZ-RL7 | ADF4007BCP | Why it matters |
|---|---|---|---|
| Function | PLL Frequency Synthesizer (integer-N) | PLL Frequency Synthesizer (integer-N) | Both are integer-N PLL synthesizers, but they target different frequency ranges and applications, affecting direct substitutability. |
| Maximum RF Input Frequency | 400 MHz | 7.5 GHz | The ADF4007 supports much higher input frequencies, so it can be used in microwave/RF applications where the ADF4002 cannot operate. |
| Prescaler | 8/9, 16/17, 32/33, 64/65 (dual-modulus) | Fixed 8/9 (dual-modulus) | Different prescaler options affect the achievable division ratios and loop performance for a given reference and output frequency. |
| Supply Voltage Range | 2.7 V to 3.3 V | 3.0 V to 3.6 V | Overlapping but not identical supply ranges; a design operating at 2.7 V would not be compatible with the ADF4007. |
| Package | 20-Lead LFCSP (4 mm x 4 mm) | 20-Lead LFCSP (4 mm x 4 mm) | Same package footprint allows potential board-level interchangeability, though pin functions must be verified. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings mean both suit the same industrial temperature environments. |
| Charge Pump Current | Programmable (up to 5 mA) | Programmable (up to 5 mA) | Similar charge pump capability supports comparable loop filter design and phase noise performance. |
| Interface | 3-wire serial (SPI-compatible) | 3-wire serial (SPI-compatible) | Same serial control interface simplifies firmware reuse when migrating between the two parts. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADF4002BCPZ-RL7 | ADF4007BCP |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Clock/Frequency Synthesizer (RF), Phase Detector | Clock/Frequency Synthesizer (RF) |
| PLL | Yes with Bypass | Yes |
| Input | CMOS, TTL | CMOS |
| Output | Clock | Clock |
| Ratio - Input: Output | 2:1 | 2:1 |
| Differential - Input: Output | Yes/No | Yes/No |
| Frequency - Max | 400MHz | 7.5GHz |
| Divider / Multiplier | Yes/No | Yes/No |
| Voltage - Supply | 2.7V ~ 3.3V | 2.7V ~ 3.3V |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 1 | - |
| Operating Temperature | -40°C ~ 85°C | - |
The ADF4002BCPZ-RL7 is a phase frequency detector (PFD) and charge pump from Analog Devices, specified for operation up to 400 MHz, supplied in a 20-lead LFCSP (CP-20-6) package and provided in tape-and-reel format. The ADF4007BCP is a related Analog Devices PFD/charge pump specified for operation up to 7.5 GHz, supplied in a 20-lead LFCSP package. Both are frequency synthesizer building blocks intended for use with an external VCO and loop filter.
Per Analog Devices datasheets, the ADF4002 is specified for a maximum RF input frequency of 400 MHz, while the ADF4007 is specified for a maximum RF input frequency of 7.5 GHz. The ADF4007 is therefore suited to higher-frequency synthesis applications, whereas the ADF4002 targets lower-frequency PLL designs.
Both devices are offered in a 20-lead LFCSP package, but pin compatibility must be confirmed against the respective Analog Devices datasheet pin configurations before any substitution. The two parts have different functional specifications and reference divider configurations, so a direct drop-in replacement should not be assumed without verifying pin functions and external component requirements.
The ADF4002 includes a programmable reference divider (14-bit R counter) and a programmable feedback divider (13-bit N counter), supporting a range of PFD frequencies. The ADF4007 uses a fixed reference divider ratio of 8 and a fixed feedback divider ratio of 8, with the PFD frequency determined by the input frequency divided by 8. This fixed-divider architecture makes the ADF4007 simpler to configure but less flexible than the ADF4002.
Both the ADF4002 and ADF4007 are specified by Analog Devices for operation from a 3.0 V to 3.6 V supply, with a nominal 3.3 V rail. The charge pump supply (VCP) can be operated at a higher voltage, up to 5.5 V, to support wider VCO tuning ranges. Designers should confirm the exact limits in the respective datasheets.
The -RL7 suffix indicates tape-and-reel packaging, with 7-inch reels, as defined in Analog Devices ordering information. The BCPZ designation identifies the 20-lead LFCSP package with Pb-free (RoHS-compliant) termination. The ADF4007BCP is supplied in the same 20-lead LFCSP package family, but its ordering suffix differs and should be checked against the manufacturer's ordering guide.
No, they are not direct substitutes. The ADF4007 has a fixed divide ratio of 8 in both reference and feedback paths and operates to 7.5 GHz, while the ADF4002 has programmable R and N dividers and operates to 400 MHz. The choice depends on the required PFD frequency, loop bandwidth, and VCO frequency; substituting one for the other requires revalidation of the loop filter and divider settings.
The ADF4002 is commonly used in low-frequency PLL synthesizers, clock generation, and as a PFD/charge pump in wireless infrastructure and instrumentation where programmable dividers are needed. The ADF4007 is used in higher-frequency synthesis, such as microwave point-to-point radios, satellite communications, and test equipment, where its 7.5 GHz input capability and fixed divide-by-8 architecture simplify the loop design.