ADA4077-2ARZ vs ADA4077-1BRZ-RL

對 ADA4077-2ARZ 和 ADA4077-1BRZ-RL 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADA4077-1BRZ-RL is a functionally compatible replacement candidate for the ADA4077-2ARZ in single-channel applications, sharing the same precision op-amp core, supply range, and SOIC footprint family, though the channel count and package body width differ and must be validated against the target PCB layout.

Channel Count Validation required
Amplifier Core Specifications High match
Package Type Validation required
Supply Voltage Range High match

Parts at a glance

Part A

ADA4077-2ARZ

ADI公司

Lifecycle
Active
Stock
5777 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADA4077-2ARZ ADA4077-1BRZ-RL Why it matters
Number of Amplifiers 2 1 Determines how many independent op-amp channels are available in a single package; a dual cannot directly replace a single in a circuit requiring two channels without adding a second device.
Package / Mounting Type 8-Lead SOIC (surface mount) 8-Lead SOIC (surface mount) Footprint and pinout must match for a drop-in board replacement; both are 8-lead SOIC but the pin assignments differ between single and dual configurations.
Grade / Temperature Range A grade, -40°C to +125°C B grade, -40°C to +125°C The B grade offers tighter guaranteed specifications than the A grade, affecting precision performance margins in demanding applications.
Input Offset Voltage (max) 25 µV (A grade) 15 µV (B grade) Lower offset voltage improves DC accuracy; the B grade provides tighter offset for precision signal chains.
Input Offset Voltage Drift (max) 0.25 µV/°C (A grade) 0.1 µV/°C (B grade) Lower drift maintains accuracy over temperature; the B grade is better suited for wide-temperature precision applications.
Input Bias Current (max) 1.5 nA (A grade) 1 nA (B grade) Lower bias current reduces errors in high-impedance circuits; the B grade offers a tighter guaranteed limit.
Gain Bandwidth Product 3.6 MHz 3.6 MHz Sets the closed-loop bandwidth achievable; identical GBW means similar AC response for a given gain configuration.
Supply Voltage Range ±2.5 V to ±15 V (4.5 V to 30 V) ±2.5 V to ±15 V (4.5 V to 30 V) Defines compatibility with the system power rails; identical range allows use in the same supply environment.
Input Voltage Noise Density 7 nV/√Hz (typ) 7 nV/√Hz (typ) Determines noise floor in low-level signal amplification; identical noise performance preserves signal-to-noise ratio.
Quiescent Current per Amplifier 400 µA (typ) 400 µA (typ) Affects power budget; identical per-amplifier current means similar total consumption for equivalent channel count.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADA4077-2ARZ ADA4077-1BRZ-RL
Supplier - Analog Devices Inc.
Part Status Active Active
Amplifier Type General Purpose General Purpose
Number of Circuits 2 1
Slew Rate 1.2V/µs 1.2V/µs
Gain Bandwidth Product 3.6 MHz 3.6 MHz
Current - Input Bias 400 pA 400 pA
Voltage - Input Offset 15 µV 15 µV
Supply Current 400µA (x2 Channels) 400µA
Current - Output / Channel 10 mA 22 mA
Voltage - Supply Span(Min) 5 V 5 V
Voltage - Supply Span(Max) 30 V 30 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount
-3 dB Bandwidth 5.5 MHz -

Frequently asked questions

What are the key differences between the ADA4077-2ARZ and the ADA4077-1BRZ-RL?

The ADA4077-2ARZ is a dual-channel precision operational amplifier supplied in an 8-lead SOIC package, while the ADA4077-1BRZ-RL is a single-channel version supplied in an 8-lead SOIC package in tape-and-reel format. Both share the same ADA4077 core amplifier architecture, but differ in channel count, package pinout, and ordering format.

Are the ADA4077-2ARZ and ADA4077-1BRZ-RL electrically identical per channel?

Yes. Both devices are based on the same ADA4077 amplifier core, so per-channel specifications such as low offset voltage, low offset voltage drift, low input bias current, and low noise are consistent between the two. The primary differences are channel count and package configuration, not the per-amplifier electrical performance.

Can the ADA4077-2ARZ be used as a drop-in replacement for the ADA4077-1BRZ-RL?

No. The ADA4077-2ARZ is a dual amplifier and the ADA4077-1BRZ-RL is a single amplifier; their pinouts and PCB land patterns differ. A direct drop-in substitution is not possible without redesigning the board layout and verifying the circuit against the manufacturer datasheet.

What package type do both the ADA4077-2ARZ and ADA4077-1BRZ-RL use?

Both parts are offered in an 8-lead SOIC package. The ADA4077-2ARZ uses the 8-lead SOIC for a dual amplifier, while the ADA4077-1BRZ-RL uses the 8-lead SOIC for a single amplifier in tape-and-reel packaging.

What does the -RL suffix on the ADA4077-1BRZ-RL indicate?

The -RL suffix denotes tape-and-reel packaging, which is intended for automated high-volume assembly. It does not change the electrical specifications of the device; it only defines the shipping and handling format.

Which part should be selected for a dual-amplifier signal chain?

The ADA4077-2ARZ should be selected when two matched precision amplifiers are required in a single package, reducing board space and component count. The ADA4077-1BRZ-RL is a single amplifier and would require two devices to achieve the same channel count.

Are both devices suitable for precision low-noise signal conditioning?

Yes. Both the ADA4077-2ARZ and ADA4077-1BRZ-RL are precision operational amplifiers intended for low-noise, low-offset signal conditioning applications. Designers should confirm the specific gain, bandwidth, and supply requirements against the official manufacturer datasheet for the target circuit.