AD9788BSVZ vs AD9787BSVZRL

對 AD9788BSVZ 和 AD9787BSVZRL 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD9788BSVZ and AD9787BSVZRL are both dual-channel 16-bit high-speed DACs from the same Analog Devices family, sharing the 100-lead TQFP-EP package and identical pinout, which makes the AD9788BSVZ a viable functional replacement candidate for the AD9787BSVZRL in most designs. The primary distinction lies in the maximum update rate, where the AD9788BSVZ offers a higher sampling frequency than the AD9787BSVZRL, so the replacement is fully compatible when the target application operates within the lower device's data-rate ceiling. Designers should confirm that the higher power consumption and any associated thermal budget of the AD9788BSVZ are acceptable in the existing layout before committing to the substitution.

Resolution and Channel Count High match
Package and Pinout High match
Maximum Update Rate Validation required
Power Consumption Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD9788BSVZ AD9787BSVZRL Why it matters
Resolution (DAC Bits) 16 14 Higher resolution provides finer output amplitude granularity and lower quantization noise, which directly affects signal fidelity and SFDR performance.
Number of DAC Channels 2 2 Both are dual-channel DACs, so channel count is identical and does not affect substitutability.
Maximum Update Rate 800 MSPS 800 MSPS Identical maximum sample rate means both can support the same signal bandwidth and synthesis frequency plans.
SFDR (at fOUT = 100 MHz) 80 dBc 78 dBc Spurious-free dynamic range determines spectral purity; the 16-bit device offers slightly better SFDR, which matters for demanding communications and instrumentation applications.
Output Type Current (differential) Current (differential) Both provide differential current outputs, so the same external output network and transformer/op-amp interface can be reused.
Digital Interface LVDS (dual-port) LVDS (dual-port) Matching LVDS input interfaces allow the same FPGA/ASIC driver and PCB routing to be used for either part.
Supply Voltage 1.8 V / 3.3 V 1.8 V / 3.3 V Identical supply rails mean the same power architecture and decoupling scheme can be shared between designs.
Package 100-lead TQFP (SV) 100-lead TQFP (SV) Same package and pinout enable drop-in board-level substitution without layout changes.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature range ensures both parts meet the same environmental requirements.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD9788BSVZ AD9787BSVZRL
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Series TxDAC+® TxDAC+®
Part Status Active Active
Number of Bits 16 14
Number of D/A Converters 2 2
Settling Time 20ns (Typ) 20ns (Typ)
Output Type Current - Unbuffered Current - Unbuffered
Differential Output Yes Yes
Data Interface Parallel Parallel
Reference Type Internal Internal
Voltage - Supply, Analog 3.13V ~ 3.47V 3.13V ~ 3.47V
Voltage - Supply, Digital 1.7V ~ 1.9V, 3.13V ~ 3.47V 1.7V ~ 1.9V, 3.13V ~ 3.47V
INL / DNL(LSB) ±3.7, ±2.1 ±1, ±0.5
Architecture Oversampling Interpolating DAC Oversampling Interpolating DAC
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the AD9788BSVZ and AD9787BSVZRL?

The AD9788BSVZ is a dual 16-bit, 800 MSPS TxDAC+ digital-to-analog converter, while the AD9787BSVZRL is a dual 14-bit, 800 MSPS TxDAC+ DAC. The primary difference is resolution: 16-bit for the AD9788 versus 14-bit for the AD9787. Both are offered in a 100-lead TQFP_EP package and share the same 800 MSPS maximum update rate and dual-channel architecture. The "RL" suffix on the AD9787BSVZRL denotes tape-and-reel packaging.

Are the AD9788BSVZ and AD9787BSVZRL pin-compatible?

Yes. Both devices are specified in the same 100-lead TQFP_EP (thin quad flat pack with exposed pad) package and belong to the same AD978x TxDAC+ family, sharing a common pinout. This allows a single PCB layout to accommodate either device, with the resolution difference handled internally.

What is the maximum update rate and resolution of each device?

Both the AD9788BSVZ and AD9787BSVZRL support a maximum DAC update rate of 800 MSPS. The AD9788BSVZ provides 16-bit resolution per DAC channel, while the AD9787BSVZRL provides 14-bit resolution per DAC channel. Both are dual-channel (dual DAC) devices.

Do both parts support the same digital interface and on-chip features?

Yes. Both devices are members of the AD978x family and share the same serial peripheral interface (SPI) for configuration, on-chip digital signal processing including a digital quadrature modulator and numerically controlled oscillator (NCO), and integrated features such as gain and offset adjustment. They also share the same supply and reference architecture as documented in the respective datasheets.

What does the "RL" suffix on AD9787BSVZRL indicate?

The "RL" suffix denotes tape-and-reel packaging for automated assembly. The AD9787BSVZRL is the tape-and-reel version of the AD9787BSVZ, while the AD9788BSVZ is supplied in standard tray packaging. The electrical specifications of the AD9787BSVZRL are identical to the AD9787BSVZ.

Can the AD9787BSVZRL be used as a drop-in replacement for the AD9788BSVZ?

Because both devices share the same package and pinout, the AD9787BSVZRL can be placed in a board designed for the AD9788BSVZ. However, it is not a functional drop-in replacement: the AD9787 provides 14-bit resolution versus 16-bit for the AD9788, which reduces the effective dynamic range and quantization noise performance. The replacement should only be made after validating that 14-bit resolution meets the system's spectral and SNR requirements.

Which device should be selected for higher dynamic range applications?

The AD9788BSVZ should be selected when higher dynamic range is required, because its 16-bit resolution provides lower quantization noise and finer amplitude resolution than the 14-bit AD9787BSVZRL. For applications where 14-bit resolution is sufficient, the AD9787BSVZRL offers the same 800 MSPS update rate and feature set in the same package.