Part A
AD9361BBCZ
ADI公司
- Lifecycle
- Active
- Stock
- 5655 件
- Package
- BGA-144
- Series
- 射頻收發器IC
Replacement verdict
Compatible functional replacement candidate
The AD9364BBCZ and AD9361BBCZ share the same package, supply architecture, and RF tuning range, making the AD9364BBCZ a viable functional substitute for the AD9361BBCZ in single-channel applications. The primary distinction is channel count: the AD9361BBCZ provides 2x2 MIMO transceiver capability, while the AD9364BBCZ offers a single transmit and single receive channel. Designers must confirm that reduced channel count, lower interface clock rates, and narrower baseband bandwidth meet system requirements before substituting.
Package and Pinout
High match
Channel Count
Not compatible
RF Frequency Range
Validation required
Baseband Bandwidth
Validation required
Parts at a glance
Part B
AD9364BBCZ
ADI公司
- Lifecycle
- Active
- Stock
- 2913 件
- Package
- BGA-144
- Series
- 射頻收發器IC
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9364BBCZ | AD9361BBCZ | Why it matters |
|---|---|---|---|
| Number of Transmit Channels | 1 | 2 | Determines how many independent transmit streams the radio can support; a 2-channel part enables MIMO or dual-band transmit, which a 1-channel part cannot. |
| Number of Receive Channels | 1 | 2 | Determines how many independent receive streams are available; 2-channel receive supports MIMO/diversity, which is not possible with a single receive channel. |
| Frequency Range | 70 MHz to 6.0 GHz | 70 MHz to 6.0 GHz | Defines the RF bands the transceiver can tune to; identical tuning range means both cover the same applications from sub-GHz up to 6 GHz. |
| Channel Bandwidth | <200 kHz to 56 MHz | <200 kHz to 56 MHz | Sets the maximum signal bandwidth the device can process; matching bandwidth means equivalent support for narrowband and wideband waveforms. |
| Supply Voltage | 1.3 V (core), 1.8 V / 2.5 V / 3.3 V (I/O) | 1.3 V (core), 1.8 V / 2.5 V / 3.3 V (I/O) | Determines power rail requirements and board-level compatibility; identical rails allow the same power design to be reused. |
| Package | 144-ball CSP_BGA (10 mm x 10 mm) | 144-ball CSP_BGA (10 mm x 10 mm) | Footprint and pinout compatibility affect whether the parts are drop-in interchangeable on an existing PCB layout. |
| Interface | SPI control, LVDS/CMOS parallel data | SPI control, LVDS/CMOS parallel data | Defines how the device connects to the baseband processor; matching interfaces simplify firmware and digital design reuse. |
| Transmit/Receive Duplexing Support | TDD and FDD (single channel) | TDD and FDD (dual channel) | Both support TDD/FDD operation, but the dual-channel part enables simultaneous multi-stream operation that the single-channel part cannot provide. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | AD9361BBCZ | AD9364BBCZ |
|---|---|---|
| Part Status | Active | Active |
| Type | TxRx Only | TxRx Only |
| RF Family / Standard | Cellular | Cellular |
| Protocol | LTE | LTE |
| Frequency | 70MHz ~ 6GHz | 70MHz ~ 6GHz |
| Power - Output | 8dBm | 8dBm |
| Serial Interfaces | SPI | SPI |
| Voltage - Supply | 1.3V | 1.3V |
| Current - Receiving | 175mA ~ 445mA | 175mA ~ 275mA |
| Current - Transmitting | 240mA ~ 820mA | 160mA ~ 490mA |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
Frequently asked questions
What are the primary differences between the AD9364BBCZ and the AD9361BBCZ?
The AD9364BBCZ is a 1x1 transceiver (one transmit channel and one receive channel), while the AD9361BBCZ is a 2x2 transceiver (two transmit channels and two receive channels). Both are RF Agile Transceiver ICs covering a tuning range of 70 MHz to 6.0 GHz, but the AD9361BBCZ supports 2x2 MIMO operation, whereas the AD9364BBCZ supports only single-channel operation.
Are the AD9364BBCZ and AD9361BBCZ pin-compatible and package-compatible?
Both devices are offered in the same 144-ball CSP_BGA package (10 mm x 10 mm). However, pin compatibility must be verified against the respective datasheets, because the AD9361BBCZ uses additional pins for its second transmit and receive channels that are not present or functional on the AD9364BBCZ. A direct drop-in replacement should not be assumed without validating the pinout and PCB layout against the manufacturer documentation.
Do the AD9364BBCZ and AD9361BBCZ cover the same RF frequency range?
Yes. Both the AD9364BBCZ and AD9361BBCZ are specified for an RF tuning range of 70 MHz to 6.0 GHz, making them suitable for a wide variety of applications including cellular, point-to-point, and software-defined radio systems.
What is the difference in channel count and MIMO capability between the two devices?
The AD9364BBCZ provides a single transmit and single receive channel (1x1), while the AD9361BBCZ provides two transmit and two receive channels (2x2). The AD9361BBCZ therefore supports 2x2 MIMO configurations, whereas the AD9364BBCZ does not.
Can the AD9364BBCZ be used as a substitute for the AD9361BBCZ in an existing design?
Substitution is not straightforward. Although both share the same package footprint and RF tuning range, the AD9361BBCZ provides two additional transmit and receive channels that the AD9364BBCZ lacks. A design requiring 2x2 MIMO cannot use the AD9364BBCZ. Any substitution must be validated against the manufacturer datasheets for pin functions, channel requirements, and system-level performance.
Do both devices support the same digital interface and data path features?
Both the AD9364BBCZ and AD9361BBCZ integrate a 12-bit ADC and DAC, and both provide a flexible digital interface. However, the AD9361BBCZ includes two complete receive and transmit data paths to support its 2x2 configuration, while the AD9364BBCZ provides only one. Designers should consult the respective datasheets to confirm interface timing and data path configuration for their specific application.
Are the AD9364BBCZ and AD9361BBCZ available in the same operating temperature grade?
Both devices are offered in the industrial temperature range of -40°C to +85°C (case temperature) in the BBCZ package option. Designers should confirm the exact ordering code and temperature specification against the manufacturer datasheet for their specific lot and application requirements.