AD9220ARSZ vs AD9226ARSRL

對 AD9220ARSZ 和 AD9226ARSRL 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD9226ARSRL is a viable functional replacement candidate for the AD9220ARSZ, sharing the same 12-bit resolution, 28-lead SSOP package, and parallel CMOS output interface. Designers must validate the higher 65 MSPS maximum sampling rate and the differing analog supply current and power dissipation against the target application's timing and thermal budget before committing to substitution.

Resolution and Output Interface High match
Package and Pin Configuration High match
Maximum Sampling Rate Validation required
Power Dissipation Validation required

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD9220ARSZ AD9226ARSRL Why it matters
Resolution 12 bits 12 bits Both are 12-bit ADCs, so quantization accuracy is equivalent for signal-to-noise performance.
Sampling Rate 10 MSPS 65 MSPS The AD9226 supports much higher throughput, enabling wider input bandwidth and faster data acquisition.
Input Type Differential Differential Differential inputs improve common-mode rejection and dynamic performance in both parts.
Supply Voltage 5 V 5 V Both operate from a single 5 V supply, simplifying power design and allowing drop-in compatibility.
Power Consumption ~100 mW ~475 mW The AD9226 consumes significantly more power due to its higher sampling rate, affecting thermal and power budget design.
Package 28-Lead SSOP 28-Lead SSOP Identical package and pinout allow physical board compatibility between the two devices.
SNR ~70 dB ~69 dB Similar signal-to-noise ratio indicates comparable noise performance for both converters.
Output Interface Parallel CMOS Parallel CMOS Both provide parallel CMOS outputs, allowing direct connection to standard digital logic and FPGAs.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Identical industrial temperature range ensures equivalent environmental robustness.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD9220ARSZ AD9226ARSRL
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Number of Bits 12 12
Sampling Rate(Per Second) 10M 65M
Number of Inputs 1 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface Parallel Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture Pipelined Pipelined
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 2.7V ~ 5.25V 2.85V ~ 5.25V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the AD9220ARSZ and AD9226ARSRL?

The AD9220ARSZ is a 12-bit, 10 MSPS analog-to-digital converter, while the AD9226ARSRL is a 12-bit, 65 MSPS ADC. Both are monolithic pipelined ADCs from Analog Devices in a 28-lead SSOP package, but the AD9226 offers a significantly higher maximum sampling rate and correspondingly higher power consumption.

Are the AD9220ARSZ and AD9226ARSRL pin-compatible?

Both devices are offered in the same 28-lead SSOP (RS) package, and their pinouts are functionally similar as members of the Analog Devices AD922x family. However, designers should verify the pin configuration and any pin-specific differences against the respective official datasheets before considering a direct board-level substitution.

What is the maximum sampling rate of each device?

The AD9220ARSZ supports a maximum sampling rate of 10 MSPS, whereas the AD9226ARSRL supports a maximum sampling rate of 65 MSPS. The higher rate of the AD9226 makes it suitable for wider-bandwidth signal acquisition applications.

What is the resolution and output format of these ADCs?

Both the AD9220ARSZ and AD9226ARSRL are 12-bit ADCs that provide a parallel CMOS-compatible digital output. The 12-bit resolution is common to both parts, so selection between them is typically driven by sampling rate, power, and dynamic performance requirements.

How do the power consumption figures compare?

The AD9220ARSZ typically consumes about 100 mW at 10 MSPS, while the AD9226ARSRL typically consumes about 475 mW at 65 MSPS. The higher power of the AD9226 reflects its much higher sampling rate and should be accounted for in thermal and supply design.

What are the typical applications for each device?

The AD9220ARSZ is suited to lower-speed, power-sensitive applications such as portable instrumentation, medical imaging front ends, and general data acquisition. The AD9226ARSRL is intended for higher-speed applications such as ultrasound, communications receivers, and high-speed data acquisition systems where 65 MSPS throughput is required.

What is the difference between the ARSZ and ARSRL ordering codes?

The ARSZ suffix on the AD9220ARSZ denotes the 28-lead SSOP package in a tube or standard shipping format, while the ARSRL suffix on the AD9226ARSRL denotes the same 28-lead SSOP package supplied in tape-and-reel format for automated assembly. The suffix difference reflects packaging and shipping format rather than device performance.

Can the AD9220ARSZ be used as a drop-in replacement for the AD9226ARSRL?

No. Although both are 12-bit ADCs in the same 28-lead SSOP package, the AD9226ARSRL supports 65 MSPS versus 10 MSPS for the AD9220ARSZ, and their power consumption and dynamic performance differ substantially. A substitution requires full validation of timing, supply, thermal, and signal-chain requirements against the official datasheets.