AD8532ARZ-REEL7 vs AD8532AR

對 AD8532ARZ-REEL7 和 AD8532AR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8532ARZ-REEL7 and AD8532AR are functionally equivalent dual operational amplifiers sharing identical core electrical specifications, differing only in packaging format and lead finish. The AD8532ARZ-REEL7 is supplied in tape-and-reel packaging with a RoHS-compliant lead-free finish, while the AD8532AR is provided in tube packaging with a standard tin-lead finish. Both parts are drop-in compatible for board-level replacement when the packaging format and lead-finish requirements are acceptable for the target assembly process.

Amplifier Specifications High match
Package Type High match
Packaging Format Validation required
Lead Finish and RoHS Compliance Validation required

Parts at a glance

Part B

AD8532AR

ADI公司

Lifecycle
Active
Stock
7509 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8532ARZ-REEL7 AD8532AR Why it matters
Number of Amplifiers 2 2 Both are dual op-amps, so channel count matches for direct substitution.
Supply Voltage Range 2.7 V to 6 V 2.7 V to 6 V Identical operating supply range ensures the part works in the same circuit rails.
Gain Bandwidth Product 3 MHz 3 MHz Same bandwidth means AC performance and stability are preserved.
Input Offset Voltage (max) 25 mV 25 mV Matching offset limits keep DC accuracy consistent between the two parts.
Output Current per Channel 250 mA 250 mA Equal drive capability supports the same load conditions.
Slew Rate 5 V/µs 5 V/µs Identical slew rate preserves large-signal transient response.
Input Bias Current 50 pA 50 pA Same ultra-low bias current suits high-impedance sensor interfaces equally.
Package / Mounting 8-SOIC, surface mount, tape and reel 8-SOIC, surface mount Same package footprint allows drop-in board replacement; only packaging format differs.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical temperature ratings ensure equivalent environmental robustness.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8532ARZ-REEL7 AD8532AR
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Amplifier Type General Purpose General Purpose
Number of Circuits 2 2
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 5V/µs 5V/µs
Gain Bandwidth Product 3 MHz 3 MHz
Current - Input Bias 5 pA 5 pA
Voltage - Input Offset 25 mV 25 mV
Supply Current 750µA (x2 Channels) 750µA (x2 Channels)
Current - Output / Channel 250 mA 250 mA
Voltage - Supply Span(Min) 2.7 V 2.7 V
Voltage - Supply Span(Max) 6 V 6 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between AD8532ARZ-REEL7 and AD8532AR?

Both are dual, low-cost, rail-to-rail input/output operational amplifiers from Analog Devices in an 8-lead SOIC package. The AD8532ARZ-REEL7 is the RoHS-compliant (Z) version supplied on a 7-inch tape-and-reel (REEL7) for automated assembly, while the AD8532AR is the non-RoHS tube/rail version. The electrical specifications are identical; the differences are packaging format and RoHS compliance.

Are the AD8532ARZ-REEL7 and AD8532AR electrically interchangeable?

Yes. Both parts share the same datasheet specifications: dual op-amp, 3 MHz gain-bandwidth product, 5 V/µs slew rate, rail-to-rail input and output, 2.7 V to 6 V single-supply operation, and an 8-lead SOIC (R-8) package with identical pinout. They differ only in RoHS status and shipping format.

What is the difference between the "Z" suffix and the "REEL7" suffix in AD8532ARZ-REEL7?

The "Z" suffix denotes RoHS compliance (lead-free, halogen-free per Analog Devices' Z designator). The "REEL7" suffix denotes a 7-inch tape-and-reel packaging format, typically 750 or 1,000 units per reel depending on the product. The AD8532AR lacks both suffixes and is supplied in non-RoHS tube/rail packaging.

Can AD8532AR be used as a drop-in replacement for AD8532ARZ-REEL7 in a RoHS-compliant design?

Electrically and mechanically yes, but not for RoHS compliance. The AD8532AR is non-RoHS and would violate RoHS-restricted designs. For RoHS-compliant assemblies, use AD8532ARZ-REEL7 or another Z-suffixed variant. Verify solderability and moisture sensitivity level against the specific datasheet before substitution.

What are the key electrical specifications shared by AD8532ARZ-REEL7 and AD8532AR?

Per the Analog Devices AD8531/AD8532/AD8534 datasheet: dual operational amplifier, 2.7 V to 6 V single supply (or ±1.35 V to ±3 V dual supply), 3 MHz gain-bandwidth product, 5 V/µs slew rate, rail-to-rail input and output, low input bias current (typically 1 pA), and 8-lead SOIC package. Both variants share these specifications.

Which package do AD8532ARZ-REEL7 and AD8532AR use, and is the pinout identical?

Both use the 8-lead SOIC (R-8) package. The pinout is identical: pin 1 = OUT A, pin 2 = −IN A, pin 3 = +IN A, pin 4 = V−, pin 5 = +IN B, pin 6 = −IN B, pin 7 = OUT B, pin 8 = V+. Package dimensions and PCB land patterns are the same for both variants.

Why would a design choose AD8532ARZ-REEL7 over AD8532AR?

AD8532ARZ-REEL7 is preferred for RoHS-compliant products and for high-volume automated SMT assembly, since the 7-inch tape-and-reel format supports pick-and-place equipment. AD8532AR is typically chosen for legacy non-RoHS designs or prototyping where tube packaging is acceptable.

Are AD8532ARZ-REEL7 and AD8532AR still active or have they been obsoleted?

Both part numbers appear in Analog Devices' product documentation as orderable variants of the AD8532. Availability and lifecycle status should be confirmed against the current Analog Devices product page or authorized distributor (DigiKey, Mouser, etc.) listing before design commitment, as lifecycle status can change.