AD8422ARZ-R7 vs AD8429ARZ

對 AD8422ARZ-R7 和 AD8429ARZ 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8429ARZ and AD8422ARZ-R7 are both precision instrumentation amplifiers in the same SOIC-8 package with identical pinout, making them a viable functional replacement candidate in many designs. However, the AD8429ARZ offers substantially higher bandwidth and faster slew rate, while the AD8422ARZ-R7 provides lower supply current and wider supply voltage range. Gain-setting resistor compatibility and noise performance should be validated against the specific application requirements before substitution.

Package Type High match
Pin Configuration High match
Bandwidth and Slew Rate Validation required
Supply Current and Voltage Range Validation required

Parts at a glance

Part A

AD8422ARZ-R7

ADI公司

Lifecycle
Active
Stock
3192 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器
Part B

AD8429ARZ

ADI公司

Lifecycle
Active
Stock
7143 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8429ARZ AD8422ARZ-R7 Why it matters
Number of Channels 1 1 Both are single-channel instrumentation amplifiers, so channel count is functionally equivalent for single-signal conditioning paths.
Gain Bandwidth Product (GBP) 15 MHz 2.2 MHz Higher GBP allows the AD8429 to maintain accurate gain at higher frequencies, which is critical for wideband signal acquisition.
Input Voltage Noise (1 kHz) 1 nV/√Hz 8 nV/√Hz Lower input noise improves signal-to-noise ratio for low-level sensor signals; the AD8429 is significantly quieter.
Input Offset Voltage (max) 50 µV 70 µV Lower offset reduces DC error at the output, important for precision measurement and high-gain applications.
Supply Current per Amplifier (typ) 6.5 mA 0.3 mA The AD8422 draws far less supply current, making it preferable for battery-powered or low-power designs.
Supply Voltage Range ±4 V to ±18 V ±2.3 V to ±18 V The AD8422 supports lower supply rails, enabling operation in low-voltage systems where the AD8429 cannot function.
CMRR (G=1000, DC to 60 Hz) 130 dB 120 dB Higher common-mode rejection suppresses interference; the AD8429 offers better rejection in high-gain precision measurements.
Operating Temperature Range -40 °C to +125 °C -40 °C to +85 °C The AD8429 supports higher ambient temperatures, making it suitable for harsh industrial environments.
Package / Mounting 8-Lead SOIC (surface mount) 8-Lead SOIC (surface mount, tape and reel) Both share the same SOIC footprint, so they are drop-in compatible on the PCB; the -R7 suffix denotes tape-and-reel packaging.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8422ARZ-R7 AD8429ARZ
Part Status Active Active
Amplifier Type Instrumentation Instrumentation
Number of Circuits 1 1
Output Type Rail-to-Rail -
Slew Rate 0.8V/µs 22V/µs
-3 dB Bandwidth 2.2 MHz 15 MHz
Current - Input Bias 500 pA 300 nA
Voltage - Input Offset 60 µV 150 µV
Supply Current 300µA 6.7mA
Current - Output / Channel 20 mA 35 mA
Voltage - Supply Span(Min) 4.6 V 8 V
Voltage - Supply Span(Max) 36 V 36 V
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8429ARZ and AD8422ARZ-R7 instrumentation amplifiers?

The AD8429ARZ is a low-noise instrumentation amplifier optimized for high gain accuracy and low noise (1 nV/√Hz typical) with a gain range of 1 to 10,000, specified over the −40°C to +125°C temperature range in an 8-lead SOIC package. The AD8422ARZ-R7 is a low-power, high-precision instrumentation amplifier with lower quiescent current (typically 300 µA) and rail-to-rail output, supplied in an 8-lead SOIC on a 7-inch reel. The AD8429 targets low-noise signal conditioning, while the AD8422 targets low-power precision applications.

Can the AD8429ARZ and AD8422ARZ-R7 be used as direct substitutes for each other?

No, they are not direct drop-in substitutes. Although both are 8-lead SOIC instrumentation amplifiers, they differ in supply voltage range, quiescent current, noise performance, gain-setting configuration, and output swing characteristics. A replacement requires validation of supply rails, gain resistor network, load conditions, and bandwidth against the respective datasheets.

How do the supply voltage requirements of the AD8429ARZ and AD8422ARZ-R7 compare?

The AD8429ARZ operates from dual supplies of ±4 V to ±18 V (8 V to 36 V total). The AD8422ARZ-R7 operates from a wider single-supply range of 3.6 V to 36 V or dual supplies of ±1.8 V to ±18 V. Designs migrating between the two must confirm that the available supply rails fall within the target device's specified operating range.

Which device offers lower power consumption, the AD8429ARZ or the AD8422ARZ-R7?

The AD8422ARZ-R7 is the lower-power option, with a typical quiescent supply current of approximately 300 µA. The AD8429ARZ draws a higher quiescent current (typically around 4.5 mA) in exchange for its lower voltage noise. The AD8422 is therefore preferred for battery-powered or power-constrained designs.

How does the voltage noise performance of the AD8429ARZ compare with the AD8422ARZ-R7?

The AD8429ARZ is specified with a typical input voltage noise density of 1 nV/√Hz at 1 kHz, making it suitable for low-level signal amplification. The AD8422ARZ-R7 has a higher typical input voltage noise density (approximately 8 nV/√Hz at 1 kHz). For noise-critical front ends, the AD8429 is the appropriate choice.

What are the gain-setting methods for the AD8429ARZ and AD8422ARZ-R7?

Both devices set gain using a single external resistor connected between the RG pins. The AD8429ARZ gain equation is G = 1 + (6 kΩ / RG), while the AD8422ARZ-R7 uses G = 1 + (19.8 kΩ / RG). Because the internal gain resistors differ, the same RG value produces different gains on each device, so the resistor must be recalculated when substituting.

Do the AD8429ARZ and AD8422ARZ-R7 differ in output swing and rail-to-rail capability?

Yes. The AD8422ARZ-R7 features a rail-to-rail output stage, allowing the output to swing close to both supply rails, which is advantageous in low-voltage single-supply systems. The AD8429ARZ output swing is specified relative to its supply rails but does not provide the same rail-to-rail output characteristic. Output headroom requirements should be checked against the datasheet for each device.

What package and ordering differences exist between the AD8429ARZ and AD8422ARZ-R7?

Both are offered in an 8-lead SOIC package. The AD8429ARZ is supplied in standard tube or tray quantities, while the AD8422ARZ-R7 suffix indicates a 7-inch tape-and-reel packaging option intended for automated assembly. The electrical specifications are identical within each part number family; the suffix denotes packaging and delivery format.