AD8221ARZ
ADI公司
- Lifecycle
- Active
- Stock
- 4567 件
- Package
- SOIC-8
- Series
- 線性放大器-儀器、運算放大器、緩衝放大器
對 AD8221ARZ 和 AD8221BRZ-RL 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD8221BRZ-RL is a higher-grade variant of the AD8221ARZ, sharing identical pinout, package, and core instrumentation amplifier architecture, making it a viable functional replacement candidate. The B-grade offers tighter gain error, lower offset voltage, and improved CMRR specifications, so it can substitute the A-grade in most precision signal-conditioning designs, though the tighter performance tolerances should be validated against the application's error budget.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8221ARZ | AD8221BRZ-RL | Why it matters |
|---|---|---|---|
| Gain Error (G=1, max) | 0.1% | 0.02% | Lower gain error improves absolute accuracy of the amplified signal, which is critical in precision measurement and bridge transducer applications. |
| Input Offset Voltage (max) | 60 µV | 25 µV | Offset voltage directly adds DC error to the measured signal; a lower guaranteed offset enables more accurate low-level signal acquisition. |
| Input Offset Voltage Drift (max) | 0.8 µV/°C | 0.3 µV/°C | Drift determines offset stability over temperature; lower drift is important for systems operating across wide temperature ranges without recalibration. |
| Input Bias Current (max) | 1.5 nA | 1.0 nA | Bias current flowing through source impedance creates error voltage; lower bias current benefits high-impedance sensor interfaces. |
| CMRR (G=1, min) | 80 dB | 90 dB | Common-mode rejection determines how well the amplifier suppresses unwanted common-mode noise, essential in noisy industrial environments. |
| Noise (RTI, 1 kHz, typ) | 8 nV/√Hz | 8 nV/√Hz | Input-referred noise sets the minimum resolvable signal; both grades share the same typical noise, so noise performance is not a differentiator. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +125°C | The wider temperature range of the B grade allows use in harsher environments and provides margin in thermally stressed designs. |
| Supply Voltage Range | ±2.3 V to ±18 V | ±2.3 V to ±18 V | Identical supply range means both parts are interchangeable for power supply design and can operate from the same rails. |
| Package / Pinout | 8-Lead SOIC | 8-Lead SOIC | Same package and pinout allow direct drop-in replacement on an existing PCB without layout changes. |
| Gain Bandwidth Product | 825 kHz (G=1) | 825 kHz (G=1) | Identical bandwidth means AC response and settling behavior are the same, so dynamic performance is unaffected by grade selection. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8221ARZ | AD8221BRZ-RL |
|---|---|---|
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Slew Rate | 2V/µs | 2V/µs |
| -3 dB Bandwidth | 825 kHz | 825 kHz |
| Current - Input Bias | 500 pA | 200 pA |
| Voltage - Input Offset | 60 µV | 25 µV |
| Supply Current | 900µA | 900µA |
| Current - Output / Channel | 18 mA | 18 mA |
| Voltage - Supply Span(Min) | 4.6 V | 4.6 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
Both are AD8221 instrumentation amplifiers in an 8-lead SOIC package. The primary difference is the grade: the AD8221ARZ is the A-grade with a specified gain error of 0.1% maximum (G=1) and offset voltage of 60 µV maximum, while the AD8221BRZ-RL is the higher-precision B-grade with gain error of 0.02% maximum (G=1) and offset voltage of 25 µV maximum. The BRZ-RL is supplied in tape-and-reel packaging, whereas the ARZ is typically supplied in tube packaging.
Yes. Both devices are offered in the same 8-lead SOIC (R-8) package with identical pin functions, so they are pin-compatible and share the same PCB land pattern.
They are pin-compatible, but the B-grade offers tighter offset voltage, offset drift, and gain error specifications than the A-grade. A substitution is acceptable only if the A-grade specifications meet the design's error budget; otherwise the higher precision of the B-grade is required.
Both the AD8221ARZ and AD8221BRZ-RL are programmable-gain instrumentation amplifiers in which gain is set by a single external resistor between the RG pins. Gain is programmed from 1 to 1000 using the manufacturer's gain equation, and both grades support the same gain range.
Yes. Both grades operate from dual supplies of ±2.3 V to ±18 V and provide the same typical bandwidth (approximately 825 kHz at G=1) and the same 1.5 V/µs typical slew rate, since they are the same core amplifier offered in different precision grades.
The AD8221ARZ is supplied in standard tube packaging, while the AD8221BRZ-RL suffix indicates tape-and-reel packaging intended for automated assembly. Both use the identical 8-lead SOIC body.
For precision bridge or transducer measurements where offset and gain errors dominate the error budget, the AD8221BRZ-RL is the appropriate choice because its 25 µV maximum offset voltage and 0.02% maximum gain error (G=1) provide tighter accuracy than the A-grade. The AD8221ARZ is suitable where the wider A-grade tolerances are acceptable.