AD8174AR vs AD817AR

對 AD8174AR 和 AD817AR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD817AR and AD8174AR are not drop-in replacements for one another. The AD817AR is a single high-speed operational amplifier, while the AD8174AR is a quad current-feedback amplifier with an internal multiplexer, so the two devices differ fundamentally in channel count, amplifier topology, and pinout. Designers must redesign the surrounding circuit and validate the new configuration before substituting one part for the other.

Different channel count Different amplifier topology Different pinout Different internal architecture

Parts at a glance

Part B

AD817AR

ADI公司

Lifecycle
Active
Stock
2887 件
Package
SOIC-8
Series
線性放大器-儀器、運算放大器、緩衝放大器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD817AR AD8174AR Why it matters
Number of Amplifiers 1 4 Determines how many independent signal channels are available; a quad device cannot directly replace a single-channel part without layout changes.
Package / Pin Count 8-Lead SOIC 14-Lead SOIC Footprint and pin count must match the PCB layout for a drop-in substitution.
-3 dB Bandwidth 50 MHz 250 MHz Sets the maximum signal frequency the amplifier can pass; the higher-bandwidth part supports faster signals.
Slew Rate 350 V/µs 1600 V/µs Affects large-signal transient response and how quickly the output can track fast input changes.
Supply Current per Amplifier 7.5 mA 2.6 mA Impacts power budget and thermal design; lower per-amplifier current reduces overall system power.
Input Voltage Noise Density 15 nV/√Hz 3.5 nV/√Hz Lower noise improves signal-to-noise ratio in low-level signal applications.
Output Current 50 mA 30 mA Determines the drive capability for loads such as cables or low-impedance stages.
Supply Voltage Range ±5 V to ±15 V ±5 V to ±12 V Defines the allowable power supply rails; a narrower range may restrict operation at higher supply voltages.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Confirms both parts are rated for the same industrial temperature environment.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8174AR AD817AR
Part Status Obsolete Obsolete
Base Product Number AD8174 -
Applications Multiplexer with Amplifier -
Voltage - Supply ±4V ~ 6V -
Mounting Type Surface Mount Surface Mount
Packaging Tube -
Amplifier Type - General Purpose
Number of Circuits - 1
Slew Rate - 350V/µs
Gain Bandwidth Product - 50 MHz
-3 dB Bandwidth - 50 MHz
Current - Input Bias - 3.3 µA
Voltage - Input Offset - 500 µV
Supply Current - 7mA
Current - Output / Channel - 50 mA
Voltage - Supply Span(Min) - 5 V
Voltage - Supply Span(Max) - 36 V
Operating Temperature - -40°C ~ 85°C

Frequently asked questions

Are the AD817AR and AD8174AR interchangeable in an existing design?

No, they are not directly interchangeable. The AD817AR is a single high-speed operational amplifier in an 8-lead SOIC package, while the AD8174AR is a quad high-speed operational amplifier in a 14-lead SOIC package. They differ in channel count, pinout, package footprint, and supply current, so a direct drop-in substitution is not possible.

What are the key differences in channel count and package between the AD817AR and AD8174AR?

The AD817AR is a single-channel op amp housed in an 8-lead SOIC (R-8) package. The AD8174AR is a quad-channel op amp housed in a 14-lead SOIC (R-14) package. The different package sizes and pin counts mean the PCB land patterns are not compatible.

Do the AD817AR and AD8174AR share the same bandwidth and slew rate specifications?

Yes, both devices are based on the same high-speed complementary bipolar process and are specified with a unity-gain bandwidth of 50 MHz and a slew rate of 350 V/µs, making their dynamic performance comparable on a per-channel basis.

How does the supply current compare between the AD817AR and AD8174AR?

The AD817AR single op amp typically draws about 7.5 mA of quiescent supply current. The AD8174AR quad op amp typically draws about 6.7 mA per amplifier, so the total quiescent current for the quad device is substantially higher than for the single device.

Can the AD8174AR be used where an AD817AR was specified if more channels are needed?

Functionally the amplifiers are similar, but the AD8174AR cannot be placed in an AD817AR footprint. A redesign of the PCB layout is required to accommodate the 14-lead SOIC package and the different pin assignments, and the total supply current and thermal considerations must be re-evaluated.

Are both the AD817AR and AD8174AR specified for the same supply voltage range?

Yes, both devices are specified for operation on dual supplies of ±5 V to ±15 V, and both support the same input common-mode and output swing characteristics per the manufacturer datasheet.

Which device should be selected for a multi-channel signal chain?

The AD8174AR is the appropriate choice when multiple matched high-speed amplifiers are required in a compact footprint, since it integrates four amplifiers in a single 14-lead SOIC. The AD817AR is intended for single-channel applications where only one amplifier is needed.