AD8170AR
ADI公司
- Lifecycle
- Active
- Stock
- 9338 件
- Series
- 介面-專用
對 AD8170AR 和 AD817AR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD817AR and AD8170AR are not drop-in replacements for one another. The AD817AR is a high-speed voltage-feedback operational amplifier, while the AD8170AR is a current-feedback amplifier with an integrated multiplexer, so the two devices differ in core function, signal architecture, and pinout. Designers should treat them as distinct components and verify circuit topology, feedback network, and board layout before considering any substitution.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD817AR | AD8170AR | Why it matters |
|---|---|---|---|
| Amplifier Type | General-purpose voltage feedback op-amp | Current feedback op-amp with multiplexer | The core topology differs; a current feedback amplifier has different feedback and bandwidth behavior than a voltage feedback amplifier, so they are not drop-in substitutes. |
| -3 dB Bandwidth | 50 MHz | 250 MHz | Bandwidth determines the maximum signal frequency the part can handle; the AD8170AR supports much higher-frequency signals. |
| Slew Rate | 350 V/µs | 1000 V/µs | Slew rate limits how fast the output can change; higher slew rate enables larger, faster signals without distortion. |
| Input Offset Voltage (max) | 2 mV | 5 mV | Offset voltage affects DC accuracy; a lower offset gives better precision in DC-coupled applications. |
| Supply Voltage Range | ±5 V to ±15 V | ±5 V to ±15 V (dual) / 5 V to 15 V (single) | Supply range determines compatibility with the system power rails; both support similar bipolar supplies but the AD8170AR also specifies single-supply operation. |
| Supply Current per Amplifier | 7.5 mA | 13 mA | Quiescent current impacts power budget and thermal design; the AD8170AR draws more current. |
| Integrated Multiplexer | No | Yes (2:1) | The AD8170AR includes an on-chip 2:1 multiplexer, adding signal-routing capability not present in the AD817AR. |
| Package | 8-lead SOIC | 8-lead SOIC | Package and pinout affect board layout and footprint compatibility; both use the same 8-lead SOIC package. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | The temperature range defines the environments in which the part can reliably operate; both cover the industrial range. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8170AR | AD817AR |
|---|---|---|
| Part Status | Obsolete | Obsolete |
| Base Product Number | AD8170 | - |
| Applications | Multiplexer with Amplifier | - |
| Voltage - Supply | ±4V ~ 6V | - |
| Mounting Type | Surface Mount | Surface Mount |
| Packaging | Tube | - |
| Amplifier Type | - | General Purpose |
| Number of Circuits | - | 1 |
| Slew Rate | - | 350V/µs |
| Gain Bandwidth Product | - | 50 MHz |
| -3 dB Bandwidth | - | 50 MHz |
| Current - Input Bias | - | 3.3 µA |
| Voltage - Input Offset | - | 500 µV |
| Supply Current | - | 7mA |
| Current - Output / Channel | - | 50 mA |
| Voltage - Supply Span(Min) | - | 5 V |
| Voltage - Supply Span(Max) | - | 36 V |
| Operating Temperature | - | -40°C ~ 85°C |
No. The AD817AR is a high-speed voltage-feedback operational amplifier, while the AD8170AR is a current-feedback amplifier with an on-chip multiplexer. They differ in function, pinout, and feedback architecture, so they are not direct substitutes.
The AD817AR is a single high-speed voltage-feedback op amp with a -3 dB bandwidth of 50 MHz and 350 V/µs slew rate. The AD8170AR is a current-feedback amplifier with a 2:1 multiplexer, offering a -3 dB bandwidth of 250 MHz and 2500 V/µs slew rate, intended for video and multiplexing applications.
Both are offered in 8-lead SOIC (R-8) packages, but their pin functions differ. The AD817AR uses the standard single op amp pinout, while the AD8170AR includes multiplexer control and two input channels, so the pin assignments are not compatible.
The AD8170AR is better suited for video signal routing because it integrates a 2:1 multiplexer and provides 250 MHz bandwidth with 0.1 dB gain flatness to 70 MHz, making it appropriate for switching between video sources. The AD817AR is a general-purpose high-speed op amp without multiplexing capability.
No. The AD8170AR uses a current-feedback architecture, which has different feedback and gain-setting requirements than the voltage-feedback AD817AR. It cannot be configured identically, and its multiplexer inputs must be properly terminated or driven.
Both the AD817AR and AD8170AR operate from dual supplies of ±5 V to ±15 V. The AD817AR typically draws 7.5 mA quiescent current, while the AD8170AR draws approximately 10 mA, reflecting its additional multiplexer circuitry.
RoHS compliance depends on the specific ordering suffix. The standard AD817AR and AD8170AR (R-8 SOIC) are available in lead-free, RoHS-compliant versions; designers should confirm the exact part number suffix against the manufacturer datasheet before assuming compliance.