AD8009ARZ
ADI公司
- Lifecycle
- Active
- Stock
- 2368 件
- Package
- SOIC-8
- Series
- 線性放大器-儀器、運算放大器、緩衝放大器
對 AD8009ARZ 和 AD8001AR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD8009ARZ and AD8001AR are both high-speed current-feedback operational amplifiers from Analog Devices in the same 8-lead SOIC package, sharing a comparable supply voltage range and similar bandwidth class. However, they differ in key dynamic specifications such as slew rate, gain-bandwidth product, and output drive capability, so the AD8009ARZ can serve as a functional substitute for the AD8001AR only after the circuit's transient response, settling, and load-driving requirements are validated against the actual datasheet limits.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8009ARZ | AD8001AR | Why it matters |
|---|---|---|---|
| -3 dB Bandwidth | 1 GHz (G = +2) | 800 MHz (G = +2) | Bandwidth determines the maximum signal frequency the amplifier can handle with acceptable gain, affecting high-speed signal fidelity. |
| Slew Rate | 5500 V/µs | 1200 V/µs | Slew rate limits how fast the output can change; higher slew rate supports larger, faster signals without distortion. |
| Supply Voltage Range | ±5 V to ±6 V (dual) | ±3 V to ±6 V (dual) | The supply range determines compatibility with the system power rails and available output swing. |
| Input Offset Voltage (max) | 10 mV | 5 mV | Offset voltage introduces DC error at the output; lower offset improves precision in DC-coupled applications. |
| Quiescent Supply Current | 16 mA (typ) | 5.5 mA (typ) | Quiescent current affects power consumption and thermal budget, critical in power-sensitive designs. |
| Output Current | 175 mA (typ) | 70 mA (typ) | Output drive capability determines the ability to drive low-impedance loads such as cables or ADCs. |
| Input Voltage Noise Density | 1.1 nV/√Hz | 2 nV/√Hz | Lower input noise improves signal-to-noise ratio in low-level signal amplification. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Package compatibility affects PCB footprint and assembly; identical packages allow drop-in replacement. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8009ARZ | AD8001AR |
|---|---|---|
| Part Status | Active | Obsolete |
| Amplifier Type | Current Feedback | Current Feedback |
| Number of Circuits | 1 | 1 |
| Slew Rate | 5500V/µs | 1200V/µs |
| Current - Input Bias | 50 µA | 5 µA |
| Voltage - Input Offset | 2 mV | 2 mV |
| Supply Current | 16mA | 5mA |
| Current - Output / Channel | 175 mA | 70 mA |
| Voltage - Supply Span (Min) | - | 6 V |
| Voltage - Supply Span (Max) | - | 12 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Base Product Number | - | AD8001 |
| -3 dB Bandwidth | 1 GHz | 715 MHz |
| Voltage - Supply Span(Min) | 5 V | - |
| Voltage - Supply Span(Max) | 12 V | - |
The AD8009ARZ is a current-feedback operational amplifier specified for a 3 dB bandwidth of 1 GHz and a slew rate of 5500 V/µs, while the AD8001AR is a current-feedback amplifier specified for a 3 dB bandwidth of 800 MHz and a slew rate of 1200 V/µs. Both are offered in 8-lead SOIC packages, but the AD8009ARZ provides higher bandwidth and slew rate for high-speed signal processing applications.
Yes. Both devices are current-feedback operational amplifiers supplied in an 8-lead SOIC package with the same pinout, so they are pin-compatible at the package level. However, circuit performance must be revalidated because the two parts have different bandwidth, slew rate, and supply current specifications.
The AD8009ARZ operates from a dual supply of ±5 V and typically draws about 16 mA of quiescent current. The AD8001AR operates from a dual supply of ±5 V and typically draws about 5.5 mA of quiescent current. The AD8001AR therefore offers lower power consumption, while the AD8009ARZ provides higher speed.
The AD8009ARZ is better suited for high-slew-rate pulse applications because its specified slew rate of 5500 V/µs is substantially higher than the 1200 V/µs slew rate of the AD8001AR. This makes the AD8009ARZ preferable for fast pulse and transient signal processing where rapid output transitions are required.
Although the two parts are pin-compatible in the 8-lead SOIC package, the AD8001AR should not be treated as a direct drop-in replacement without validation. Its lower bandwidth (800 MHz vs. 1 GHz) and lower slew rate (1200 V/µs vs. 5500 V/µs) may degrade performance in circuits designed around the AD8009ARZ, so the design must be re-evaluated against the AD8001AR datasheet.
Both are current-feedback amplifiers intended for high-speed signal processing. The AD8009ARZ, with its 1 GHz bandwidth and 5500 V/µs slew rate, is suited to high-speed pulse amplification, video and RGB processing, and fast transient applications. The AD8001AR, with its 800 MHz bandwidth and lower 5.5 mA supply current, is suited to lower-power high-speed amplification, video distribution, and portable instrumentation.
Both the AD8009ARZ and the AD8001AR are specified for the industrial temperature range of −40 °C to +85 °C, so they share the same rated operating temperature range for industrial applications.