AD7710ARZ vs AD7714ARZ-5

對 AD7710ARZ 和 AD7714ARZ-5 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7714ARZ-5 and AD7710ARZ are both 24-bit sigma-delta ADCs from Analog Devices in a 24-lead SOIC package, sharing a similar serial interface and signal-chain architecture, so the AD7714ARZ-5 can serve as a functional replacement candidate for the AD7710ARZ in many designs. However, the two devices differ in input channel configuration, programmable gain range, and supply voltage requirements, so the replacement must be validated against the target application's input multiplexing, gain settings, and power rail before adoption.

Resolution and ADC Architecture High match
Input Channel Configuration Validation required
Programmable Gain Range Validation required
Supply Voltage Requirements Validation required

Parts at a glance

Part A

AD7710ARZ

ADI公司

Lifecycle
Active
Stock
4329 件
Package
SOIC-24
Series
資料獲取-模數轉換器(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7714ARZ-5 AD7710ARZ Why it matters
Resolution (bits) 24 24 Both are 24-bit sigma-delta ADCs, so resolution is equivalent for high-precision measurement applications.
Number of input channels 5 (differential/3 pseudo-differential configurable) 2 (differential) More input channels allow the AD7714 to multiplex multiple sensors without external switching, while the AD7710 suits single- or dual-channel designs.
PGA gain range 1 to 128 1 to 128 Identical programmable gain ranges mean both can directly interface with low-level signals such as thermocouples and bridge sensors.
Output data rate (max) 1 kHz 1.028 kHz Similar maximum update rates make both suitable for low-frequency precision measurement, though slight differences affect timing budgets.
Supply voltage 2.7 V to 5.25 V (single supply) 5 V (single) or ±5 V (dual supply) The AD7714 supports lower supply voltages for portable/low-power systems, while the AD7710 requires 5 V or bipolar supplies for wider signal swing.
Interface type SPI-compatible serial (3-wire) SPI-compatible serial (2-wire) Both use serial interfaces, but pin/wire differences affect microcontroller wiring and firmware compatibility.
Package 24-lead SOIC (wide body) 24-lead SOIC (wide body) Identical package footprint enables drop-in PCB compatibility between the two parts.
On-chip calibration Yes (self and system calibration) Yes (self and system calibration) Both offer calibration features that reduce offset and gain errors, simplifying system-level accuracy design.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature ranges mean both are interchangeable for harsh-environment applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7710ARZ AD7714ARZ-5
Part Status Active Active
Number of Bits 24 24
Sampling Rate(Per Second) 1k 1k
Number of Inputs 2 3, 5
Input Type Differential Differential, Pseudo-Differential
Data Interface SPI SPI, DSP
Configuration MUX-PGA-ADC MUX-PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External, Internal External
Voltage - Supply, Analog 5V ~ 10V 5V
Voltage - Supply, Digital 5V 3V ~ 5.25V
Features PGA PGA
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the primary functional differences between the AD7714ARZ-5 and the AD7710ARZ?

The AD7714ARZ-5 is a 24-bit sigma-delta ADC with a maximum output rate of 1 kSPS and a specified supply voltage of 5 V, featuring three differential input channels. The AD7710ARZ is a 24-bit sigma-delta ADC with a maximum output rate of 1.028 kSPS, operates from a 5 V or 10 V supply, and includes two differential input channels with an on-chip programmable gain amplifier (PGA) and a bidirectional serial port. Both are manufactured by Analog Devices in a 24-lead SOIC package.

Are the AD7714ARZ-5 and AD7710ARZ pin-compatible?

No. Although both devices are housed in a 24-lead SOIC (R-24) package, their pin functions differ. The AD7714ARZ-5 provides three differential analog input pairs and a dedicated interface for a 5 V supply, while the AD7710ARZ provides two differential input pairs with a different pin assignment for its PGA and serial interface. A direct drop-in replacement is not possible without verifying the pinout against the respective Analog Devices datasheets.

Can the AD7714ARZ-5 be used as a direct substitute for the AD7710ARZ in an existing design?

No. The two devices differ in the number of analog input channels (three differential pairs on the AD7714ARZ-5 versus two on the AD7710ARZ), supply voltage specifications, and pin assignments. Substitution requires a full review of the schematic, PCB layout, and firmware to confirm compatibility with the target device's register map and interface timing.

What is the maximum output data rate of each device?

The AD7714ARZ-5 supports a maximum output update rate of 1 kSPS. The AD7710ARZ supports a maximum output update rate of 1.028 kSPS. Both values are specified in the respective Analog Devices datasheets.

How many differential analog input channels does each device provide?

The AD7714ARZ-5 provides three differential analog input pairs (AIN1/AIN2, AIN3/AIN4, AIN5/AIN6). The AD7710ARZ provides two differential analog input pairs (AIN1/AIN2 and AIN3/AIN4). This difference affects channel count in multi-sensor designs.

Do both devices include an on-chip programmable gain amplifier (PGA)?

Yes. Both the AD7714ARZ-5 and the AD7710ARZ integrate a programmable gain amplifier. The AD7714ARZ-5 offers gain settings from 1 to 128, and the AD7710ARZ offers gain settings from 1 to 128 as well. The PGA allows direct interfacing with low-level transducer signals without external amplification.

What supply voltage does each device require?

The AD7714ARZ-5 is specified for operation from a single 5 V supply (the "-5" suffix denotes the 5 V version). The AD7710ARZ is specified for operation from a 5 V or 10 V supply, depending on the configuration. Designers must confirm the supply rail against the target device's datasheet before substitution.

Are both devices available in the same package type?

Yes. Both the AD7714ARZ-5 and the AD7710ARZ are offered in a 24-lead SOIC package (Analog Devices package code R-24). However, identical package outlines do not imply identical pin functions, so the PCB land pattern and pin assignments must be verified separately for each device.