AD7685BRMZRL7 vs AD7683ARM

對 AD7685BRMZRL7 和 AD7683ARM 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD7683ARM can serve as a functional replacement candidate for the AD7685BRMZRL7 in many precision ADC applications, as both share a 16-bit SAR architecture, pseudo-differential input, and an identical 10-lead MSOP footprint. However, the AD7683ARM offers a lower throughput of 100 kSPS versus 250 kSPS and lacks the daisy-chain capable serial interface of the AD7685BRMZRL7, so system timing and multi-device topologies must be validated before substitution.

Resolution and Architecture High match
Sampling Rate Validation required
Package and Pinout High match
Serial Interface Validation required

Parts at a glance

Part B

AD7683ARM

ADI公司

Lifecycle
Active
Stock
3371 件
Package
TSSOP-8
Series
資料獲取-模數轉換器(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7685BRMZRL7 AD7683ARM Why it matters
Resolution (bits) 16 16 Both are 16-bit ADCs, so resolution is equivalent and not a differentiator for substitutability.
Sampling Rate (max) 250 kSPS 100 kSPS The AD7685 supports a higher throughput, which matters if the application requires faster sampling than 100 kSPS.
Interface Type SPI / QSPI / MICROWIRE / DSP compatible serial SPI / QSPI / MICROWIRE / DSP compatible serial Both use a compatible serial interface, so digital host connectivity is interchangeable.
Input Type Pseudo-differential, single-ended Pseudo-differential, single-ended Matching input architecture means the analog front-end design can be reused without changes.
Supply Voltage (analog) 2.7 V to 5.5 V 2.7 V to 5.5 V Identical analog supply range allows the same power rail design for either part.
Package 10-lead MSOP (RM) 8-lead MSOP (RM) Different pin counts and footprints mean the PCB layout must be redesigned; they are not drop-in replacements.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Same industrial temperature range, so environmental suitability is equivalent.
Power Consumption (typical) ~3.5 mW at 5 V, 250 kSPS ~1.5 mW at 5 V, 100 kSPS Lower power per conversion in the AD7683 may matter for battery-powered or thermally constrained designs.
Reference Input External reference External reference Both require an external reference, so the reference circuit can be shared between designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7685BRMZRL7 AD7683ARM
Supplier - Rochester Electronics, LLC
Series PulSAR® PulSAR®
Part Status Active Obsolete
Number of Bits 16 16
Sampling Rate(Per Second) 250k 100k
Data Interface SPI, DSP SPI, DSP
Number of A/D Converters 1 1
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Number of Inputs 1 -
Input Type Pseudo-Differential -
Configuration S/H-ADC -
Ratio - S / H: ADC 1:1 -
Architecture SAR -
Reference Type External -
Voltage - Supply, Analog 2.3V ~ 5.5V -
Voltage - Supply, Digital 2.3V ~ 5.5V -

Frequently asked questions

What are the key differences between the AD7685BRMZRL7 and AD7683ARM?

The AD7685BRMZRL7 is a 16-bit, 250 kSPS PulSAR ADC with a pseudo-differential input, while the AD7683ARM is a 16-bit, 100 kSPS PulSAR ADC with a fully differential input. The AD7685 offers higher throughput and a wider supply range (2.7 V to 5.5 V), whereas the AD7683 operates from a single 2.7 V to 5.25 V supply and provides lower power consumption at its lower sample rate.

Are the AD7685BRMZRL7 and AD7683ARM pin-compatible?

No. The AD7685BRMZRL7 is supplied in a 10-lead MSOP (RM package), while the AD7683ARM is supplied in an 8-lead MSOP (RM package). The different pin counts and pin functions mean they are not drop-in replacements and require separate PCB layouts.

What is the maximum sampling rate of each device?

The AD7685BRMZRL7 supports a maximum throughput of 250 kSPS. The AD7683ARM supports a maximum throughput of 100 kSPS. Both are successive-approximation register (SAR) ADCs using the PulSAR architecture.

How do the input configurations differ between the two ADCs?

The AD7685BRMZRL7 provides a pseudo-differential input structure, while the AD7683ARM provides a fully differential input structure. This affects how the analog signal is interfaced and the common-mode rejection behavior in the target application.

What serial interfaces do the AD7685BRMZRL7 and AD7683ARM use?

Both devices provide an SPI-compatible serial interface. The AD7685BRMZRL7 supports SPI, QSPI, MICROWIRE, and DSP interface standards, and the AD7683ARM also uses a serial interface compatible with SPI and similar host controllers, allowing direct connection to common microcontrollers and DSPs.

What are the supply voltage and power considerations for these parts?

The AD7685BRMZRL7 operates from a 2.7 V to 5.5 V supply, and the AD7683ARM operates from a 2.7 V to 5.25 V supply. Both are low-power SAR converters, but the AD7683ARM's lower 100 kSPS throughput generally results in lower power consumption at its rated sample rate compared with the 250 kSPS AD7685BRMZRL7.

Can the AD7683ARM be used as a direct replacement for the AD7685BRMZRL7 in an existing design?

No. Because the two devices differ in package pin count (8-lead vs 10-lead MSOP), input configuration (fully differential vs pseudo-differential), and maximum throughput (100 kSPS vs 250 kSPS), a direct replacement is not possible without redesigning the PCB layout and revalidating the analog front end and timing.