AD7656YSTZ vs AD7654AST

對 AD7656YSTZ 和 AD7654AST 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD7656YSTZ and AD7654AST are not drop-in replacements for one another. The AD7656YSTZ is a 6-channel, 16-bit simultaneous-sampling bipolar ADC in a 64-lead LQFP package, while the AD7654AST is a 4-channel, 16-bit successive-approximation ADC in a 48-lead LQFP package. The differences in channel count, package footprint, and digital interface architecture require board-level redesign and preclude direct substitution.

Different channel count Different package footprint Different digital interface Different conversion architecture

Parts at a glance

Part B

AD7654AST

ADI公司

Lifecycle
Active
Stock
7850 件
Package
LQFP-48
Series
資料獲取-模數轉換器(ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD7656YSTZ AD7654AST Why it matters
Number of ADC Channels 6 2 Determines how many independent analog signals can be sampled simultaneously; a 6-channel device cannot be directly substituted where 2 channels suffice, and vice versa.
Resolution 16 bits 16 bits Both provide 16-bit resolution, so precision and dynamic range are comparable for signal acquisition.
Sampling Rate (max) 250 kSPS 500 kSPS Higher throughput affects the maximum signal bandwidth that can be captured; the AD7654AST can sample faster per channel.
Input Type Single-ended (true bipolar) Pseudo-differential Input configuration affects how signals are connected and common-mode rejection; substitution may require circuit changes.
Supply Voltage 5 V analog (AVDD), 5 V digital (DVDD) 5 V analog (AVDD), 5 V digital (DVDD) Matching supply requirements simplifies power-rail compatibility in a replacement design.
Interface Parallel / Serial (SPI/QSPI/MICROWIRE/DSP) Parallel / Serial (SPI/QSPI/MICROWIRE/DSP) Compatible digital interfaces allow connection to the same host controller without protocol redesign.
Package 64-lead LQFP 48-lead LQFP Different package footprints and pin counts prevent direct board-level drop-in replacement.
Operating Temperature Range -40 °C to +125 °C -40 °C to +85 °C The wider temperature range of the AD7656YSTZ suits harsher environments; the AD7654AST is limited to standard industrial conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD7656YSTZ AD7654AST
Supplier - Rochester Electronics, LLC
Series iCMOS® PulSAR®
Part Status Active Obsolete
Number of Bits 16 16
Sampling Rate(Per Second) 250k 500k
Number of A/D Converters 6 1
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Number of Inputs 6 -
Input Type Single Ended -
Data Interface SPI, Parallel, DSP -
Configuration S/H-ADC -
Ratio - S / H: ADC 1:1 -
Architecture SAR -
Reference Type External, Internal -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 5V -
Features Simultaneous Sampling, True Bipolar -

Frequently asked questions

What are the key differences between the AD7656YSTZ and the AD7654AST?

The AD7656YSTZ is a 16-bit, 6-channel simultaneous-sampling SAR ADC in a 64-lead LQFP package, while the AD7654AST is a 16-bit, 4-channel simultaneous-sampling SAR ADC in a 48-lead LQFP package. The AD7656YSTZ provides six ADC channels versus four on the AD7654AST, and the two devices differ in package footprint and pin count, so they are not drop-in replacements for each other.

Do the AD7656YSTZ and AD7654AST have the same resolution and architecture?

Yes. Both are 16-bit successive-approximation-register (SAR) analog-to-digital converters with simultaneous sampling, per Analog Devices datasheets. The primary differences are channel count, package, and related pinout rather than resolution or conversion architecture.

Can the AD7656YSTZ be used as a direct substitute for the AD7654AST?

No. The AD7656YSTZ is a 64-lead LQFP device with six channels, and the AD7654AST is a 48-lead LQFP device with four channels. The differing package, pin count, and channel count prevent a direct PCB-level substitution without redesign and validation against the manufacturer datasheets.

What package types do the AD7656YSTZ and AD7654AST use?

The AD7656YSTZ is supplied in a 64-lead LQFP package, and the AD7654AST is supplied in a 48-lead LQFP package, according to Analog Devices documentation. The "YSTZ" and "AST" suffixes denote the respective package and temperature-grade variants.

How many simultaneous-sampling channels does each device provide?

The AD7656YSTZ provides six simultaneous-sampling ADC channels, and the AD7654AST provides four simultaneous-sampling ADC channels. This channel-count difference is a primary selection criterion when choosing between the two parts.

Are the AD7656YSTZ and AD7654AST both 16-bit SAR ADCs from Analog Devices?

Yes. Both devices are 16-bit SAR analog-to-digital converters manufactured by Analog Devices. Their shared resolution and architecture allow similar signal-chain design approaches, but the channel count and package differences must be accounted for in layout and system design.

What should be verified before considering either part for a new design?

Designers should verify channel count, package footprint, pinout, supply and reference requirements, and digital interface timing against the official Analog Devices datasheets for the AD7656YSTZ and AD7654AST. Because the two parts differ in package and channel count, neither can be assumed interchangeable without full documentation review and validation.