AD7656BSTZ
ADI公司
- Lifecycle
- Active
- Stock
- 3438 件
- Package
- LQFP-64
- Series
- 資料獲取-模數轉換器(ADC)
對 AD7656BSTZ 和 AD7651AST 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD7656BSTZ and AD7651AST are not drop-in replacements for one another. The AD7656BSTZ is a six-channel simultaneous-sampling bipolar ADC in a 64-lead LQFP, while the AD7651AST is a single-channel unipolar ADC in a 48-lead LQFP. They differ in channel count, input configuration, package footprint, and digital interface, so a direct board-level substitution is not possible without redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7656BSTZ | AD7651AST | Why it matters |
|---|---|---|---|
| Number of ADC Channels | 6 | 1 | Determines how many independent analog signals can be sampled simultaneously; a 6-channel part cannot be substituted by a single-channel part in multi-channel systems. |
| Resolution | 16 bits | 16 bits | Both provide 16-bit resolution, so precision and LSB size are comparable, which is important for measurement accuracy. |
| Sampling Rate | 250 kSPS | 100 kSPS | Maximum throughput affects the highest signal frequency that can be digitized; the slower part may not meet bandwidth requirements of the faster design. |
| Input Type | Single-ended (true bipolar) | Single-ended (unipolar/bipolar) | Input configuration must match the sensor or signal conditioning; mismatched input ranges can require additional level-shifting circuitry. |
| Interface | Parallel / Serial (SPI) | Serial (SPI) | The host microcontroller or FPGA must support the available digital interface; a parallel-only host cannot use a serial-only device without rework. |
| Supply Voltage | 5 V analog, 5 V digital | 5 V analog, 5 V digital | Matching supply rails simplifies power design and ensures compatible logic levels with surrounding circuitry. |
| Package | 64-lead LQFP | 48-lead LQFP | Footprint and pin count must match the PCB layout; different packages require board redesign and cannot be drop-in replaced. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings ensure both parts suit the same environmental conditions and reliability requirements. |
| Power Consumption | Approx. 100 mW (typical) | Approx. 25 mW (typical) | Power budget differences affect thermal design and supply sizing; the higher-power part may exceed the thermal envelope of a low-power design. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7656BSTZ | AD7651AST |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | iCMOS® | PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 250k | 100k |
| Number of A/D Converters | 6 | 1 |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Number of Inputs | 6 | - |
| Input Type | Single Ended | - |
| Data Interface | SPI, Parallel, DSP | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | SAR | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 5V | - |
| Features | Simultaneous Sampling, True Bipolar | - |
The AD7656BSTZ is a 16-bit, 6-channel, simultaneous-sampling successive-approximation (SAR) ADC with a 250 kSPS throughput rate per channel, housed in a 64-lead LQFP package. The AD7651AST is a 16-bit, single-channel, 100 kSPS SAR ADC in a 48-lead LQFP package. The AD7656 integrates six ADCs with six track-and-hold amplifiers for simultaneous sampling, while the AD7651 provides one channel with a single track-and-hold.
No. The two devices differ in channel count (6 vs 1), package footprint (64-lead LQFP vs 48-lead LQFP), pinout, throughput rate (250 kSPS vs 100 kSPS), and external interface configuration. They are not pin-compatible or functionally interchangeable, so a direct drop-in substitution is not possible without PCB and firmware redesign.
The AD7656BSTZ offers a maximum throughput of 250 kSPS per channel with all six channels sampling simultaneously. The AD7651AST offers a maximum throughput of 100 kSPS for its single channel. Both are SAR-type ADCs, but the AD7656 provides higher per-channel speed and parallel multi-channel acquisition.
Both the AD7656BSTZ and AD7651AST support bipolar analog input ranges of ±10 V and ±5 V, selectable via configuration. This makes both devices suitable for industrial signal acquisition where bipolar front-end signals are common, though the AD7656 provides six simultaneous channels versus one on the AD7651.
The AD7656BSTZ provides a parallel interface (with word/byte modes) plus a serial interface, supporting high-speed readback of six channels. The AD7651AST provides a parallel interface for its single channel. System designers must account for these interface differences when migrating between the two parts.
Both devices operate from a 5 V analog supply (AVDD) and require a separate digital supply (DVDD) for the interface, typically 2.7 V to 5.25 V. The AD7656BSTZ, with six ADCs, draws higher total supply current than the single-channel AD7651AST, so power budget and thermal planning differ between the two designs.
The AD7656BSTZ is suited to multi-phase power monitoring, motor control, and power-quality analyzers where six simultaneous channels are needed to capture correlated signals. The AD7651AST is suited to single-channel precision measurement, such as isolated sensor acquisition or single-axis monitoring, where one 16-bit channel at 100 kSPS is sufficient.
No. The AD7656BSTZ is supplied in a 64-lead LQFP package, while the AD7651AST is supplied in a 48-lead LQFP package. The pin counts and pin assignments differ, so PCB land patterns and routing are not compatible between the two devices.