AD534JD vs AD534SD/883B

對 AD534JD 和 AD534SD/883B 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD534JD and AD534SD/883B are functionally equivalent analog multipliers sharing identical core specifications, including transfer function, input/output voltage ranges, and supply requirements. The primary distinction lies in the operating temperature range and screening level, where the AD534SD/883B is qualified to MIL-STD-883B standards for military and aerospace applications. For commercial or industrial environments, the AD534JD serves as a direct functional substitute; however, designs requiring extended temperature operation or military-grade reliability should validate the environmental and qualification requirements before substituting the commercial-grade variant.

Transfer Function High match
Supply Voltage High match
Operating Temperature Range Validation required
Qualification Level Validation required

Parts at a glance

Part A

AD534JD

ADI公司

Lifecycle
Active
Stock
4704 件
Package
CDIP-14
Series
線性-模擬乘法器、除法器

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD534JD AD534SD/883B Why it matters
Operating Temperature Range 0°C to +70°C -55°C to +125°C Defines the environments where the part can reliably operate; the military-grade version supports far wider extremes.
Temperature Grade / Screening Commercial grade Military grade, MIL-STD-883B screened Screening level determines lot traceability, burn-in, and reliability assurance required for defense and aerospace use.
Package / Case 14-lead Ceramic DIP (hermetic) 14-lead Ceramic DIP (hermetic) Physical footprint and mounting must match for drop-in substitution on an existing board.
Total Error (max) ±0.25% of full scale ±0.25% of full scale Specifies worst-case accuracy of the analog multiplier/divider transfer function.
Supply Voltage (dual) ±8 V to ±18 V ±8 V to ±18 V Determines compatibility with the system power rails and output swing headroom.
Nonlinearity (max) ±0.2% of full scale ±0.2% of full scale Sets the deviation from ideal multiplication, critical for precision analog computation.
Input Offset Voltage (max) ±1 mV ±1 mV Offset directly limits DC accuracy of the multiplier output at zero input.
Bandwidth (small signal) 1 MHz 1 MHz Determines the maximum signal frequency the device can process with acceptable gain.
RoHS / Compliance Non-RoHS (contains lead) Non-RoHS (contains lead) Affects regulatory compliance for commercial products versus legacy military systems.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD534JD AD534SD/883B
Supplier - Rochester Electronics, LLC,Analog Devices Inc.
Part Status Obsolete Active
Function Analog Multiplier/Divider Analog Multiplier/Divider
Number of Bits / Stages 4-Quadrant 4-Quadrant

Frequently asked questions

What are the primary differences between the AD534JD and AD534SD/883B analog multipliers?

The AD534JD is a commercial-grade analog multiplier specified for 0°C to +70°C operation, while the AD534SD/883B is a military-grade version compliant with MIL-STD-883B, specified for -55°C to +125°C operation. Both share the same core multiplier architecture and laser-trimmed accuracy, but the SD/883B undergoes additional screening and qualification testing per the 883B standard.

Are the AD534JD and AD534SD/883B functionally interchangeable in a circuit design?

Functionally, both devices perform analog multiplication, division, squaring, and square-rooting with the same transfer function and pin configuration. However, the AD534SD/883B is tested and guaranteed over the full military temperature range, whereas the AD534JD is only guaranteed over the commercial range. Direct substitution requires verifying that the application's temperature range and reliability requirements are met by the chosen grade.

What is the accuracy specification for the AD534JD and AD534SD/883B?

Both grades offer laser-trimmed accuracy with a maximum total error of ±0.25% of full scale at +25°C for the AD534J and AD534S grades. The AD534SD/883B maintains specified accuracy over the full -55°C to +125°C military temperature range, while the AD534JD is specified over 0°C to +70°C.

Do the AD534JD and AD534SD/883B use the same package and pinout?

Yes, both devices are available in the same 14-pin hermetic ceramic dual in-line package (DIP) with identical pin assignments. This allows for a common PCB footprint, but the AD534SD/883B may have additional marking and documentation requirements for military traceability.

What is the power supply requirement for the AD534JD and AD534SD/883B?

Both devices operate from standard ±15 V dual supplies, with an operating range typically from ±8 V to ±18 V. The AD534SD/883B is additionally characterized for operation over the full military temperature range with the same supply voltages.

Is the AD534SD/883B compliant with MIL-STD-883B screening requirements?

Yes, the AD534SD/883B is processed and screened in accordance with MIL-STD-883B, which includes additional testing such as burn-in, temperature cycling, and hermeticity testing. The AD534JD does not carry this military qualification.

Can the AD534JD be used in military or aerospace applications?

The AD534JD is a commercial-grade device and is not qualified for military or aerospace use where MIL-STD-883B compliance is required. For such applications, the AD534SD/883B is the appropriate choice due to its extended temperature range and military screening.