AD5252BRUZ1-RL7
ADI公司
- Lifecycle
- Active
- Stock
- 6830 件
- Package
- TSSOP-14
- Series
- 資料獲取-數位電位器
對 AD5252BRUZ1-RL7 和 AD5251BRU1 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The AD5251BRU1 and AD5252BRUZ1-RL7 share the same dual-channel digital potentiometer architecture, 10 kΩ end-to-end resistance, I²C interface, and TSSOP-14 footprint, making the AD5251BRU1 a viable functional substitute for the AD5252BRUZ1-RL7 in most designs. However, the AD5251 offers 64-position resolution versus 256 positions on the AD5252, and the AD5252 provides nonvolatile EEMEM storage for wiper settings that the AD5251 lacks. Designers must validate resolution-sensitive applications and any reliance on nonvolatile wiper recall before committing to this substitution.
ADI公司
ADI公司
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD5252BRUZ1-RL7 | AD5251BRU1 | Why it matters |
|---|---|---|---|
| Number of Positions | 256 | 64 | Determines the resolution of the digital potentiometer; a 256-position device offers finer adjustment steps than a 64-position device, affecting precision in calibration and control loops. |
| Number of Taps | 256 | 64 | The number of taps defines the discrete resistance settings available, directly impacting the achievable wiper resolution and monotonicity of the potentiometer. |
| Resistance Value | 1 kΩ | 10 kΩ | The end-to-end resistance affects the current handling, power dissipation, and the RC time constants in the circuit; substituting a different value can alter signal levels and timing. |
| Interface Type | I²C | Up/Down (3-wire) | The communication protocol determines how the host controller configures the device; I²C and up/down interfaces are not pin-compatible and require different firmware and wiring. |
| Memory Type | Non-Volatile (EEPROM) | Volatile | Non-volatile memory retains the wiper setting after power loss, while volatile memory resets to a default position, affecting system startup behavior and the need for re-initialization. |
| Package / Mounting | 14-TSSOP (Surface Mount) | 14-TSSOP (Surface Mount) | Package and mounting type must match the PCB footprint and assembly process; both being 14-TSSOP allows potential board-level compatibility if pinouts align. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | The operating voltage range must be compatible with the system power rails; identical ranges simplify power supply design and ensure similar logic-level compatibility. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +85°C | The temperature range defines the environments in which the device can reliably operate; a wider range supports harsher industrial or automotive applications. |
| Wiper Resistance | ~50 Ω (typical) | ~50 Ω (typical) | Wiper resistance adds to the set resistance and can cause errors, especially at low resistance settings; similar values ensure comparable accuracy in voltage divider or rheostat modes. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD5252BRUZ1-RL7 | AD5251BRU1 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 2 | 2 |
| Number of Taps | 256 | 64 |
| Resistance(Ohms) | 1k | 1k |
| Interface | I²C | I²C |
| Memory Type | Non-Volatile | Non-Volatile |
| Voltage - Supply | 2.7V ~ 5.5V, ±2.25V ~ 2.75V | 2.7V ~ 5.5V, ±2.25V ~ 2.75V |
| Features | Selectable Address | Selectable Address |
| Tolerance | ±30% | ±30% |
| Temperature Coefficient(Typ) | 650ppm/°C | 650ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 105°C |
The AD5252BRUZ1-RL7 is a dual-channel, 256-position digital potentiometer, while the AD5251BRU1 is a single-channel, 64-position digital potentiometer. The AD5252 offers two independent variable resistors, whereas the AD5251 provides only one. Additionally, the AD5252 has 8 bits of resolution (256 positions), and the AD5251 has 6 bits (64 positions). Both are nonvolatile, I2C-compatible digital potentiometers from Analog Devices.
No. The AD5252BRUZ1-RL7 is supplied in a 14-lead TSSOP package, while the AD5251BRU1 is supplied in a 10-lead MSOP package. The different package sizes and pin counts mean they are not pin-compatible and cannot be used as drop-in replacements without PCB redesign.
The AD5252BRUZ1-RL7 is available in 1 kΩ, 10 kΩ, 50 kΩ, and 100 kΩ end-to-end resistance options. The AD5251BRU1 is available in 10 kΩ, 50 kΩ, and 100 kΩ options. The specific resistance value is indicated by the part number suffix and must be confirmed from the ordering guide in the respective datasheets.
Yes. Both the AD5252 and AD5251 are nonvolatile digital potentiometers that retain the wiper setting after power is removed. They store the wiper position in on-chip EEPROM, which is restored automatically at power-up. This is a key feature of both devices.
Both devices support a 2-wire I2C-compatible serial interface. The AD5252 supports standard mode (100 kHz) and fast mode (400 kHz). The AD5251 also supports standard and fast mode I2C. Both can be addressed via hardware pins, allowing multiple devices on the same bus.
No. The AD5251BRU1 is a single-channel, 64-position device in a 10-lead MSOP package, while the AD5252BRUZ1-RL7 is a dual-channel, 256-position device in a 14-lead TSSOP package. They differ in channel count, resolution, package, and pinout. A direct substitution is not possible without significant hardware and software changes.
Both devices are used for digital volume control, LCD panel brightness and contrast adjustment, programmable power supplies, gain and offset adjustment in signal conditioning, and mechanical potentiometer replacement. The AD5252 is preferred where two independent channels are needed, while the AD5251 suits space-constrained single-channel applications.
Both devices are specified for the industrial temperature range of −40°C to +105°C. This is a standard specification for the AD5251/AD5252 family and is confirmed in the Analog Devices datasheets.