74LCX244MTC
安森美
- Lifecycle
- Active
- Stock
- 5042 件
- Series
- 邏輯-緩衝器、驅動器、接收器、收發器
對 74LCX244MTC 和 74LCX245TTR 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The 74LCX244MTC and 74LCX245TTR are functionally compatible octal buffer/transceiver devices sharing the same LCX logic family, 20-pin TSSOP footprint, and 2.3 V to 3.6 V operating range. The primary distinction is the 74LCX244's unidirectional dual 4-bit buffer configuration versus the 74LCX245's bidirectional 8-bit transceiver with direction control, making the 74LCX245 a viable substitute only where bidirectional data flow is not required or can be externally managed.
安森美
意法半導體
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74LCX244MTC | 74LCX245TTR | Why it matters |
|---|---|---|---|
| Logic Function | Octal Buffer/Line Driver (non-inverting, unidirectional) | Octal Bus Transceiver (non-inverting, bidirectional) | Determines whether the device can drive signals in one direction only (244) or both directions (245), which is critical for bus-oriented designs. |
| Direction Control | Two active-low output enables (1OE, 2OE) | One direction pin (DIR) plus one active-low output enable (OE) | The 245 supports bidirectional data flow via DIR, while the 244 only enables/disables outputs, so they are not directly interchangeable in bus applications. |
| Supply Voltage Range | 2.0 V to 3.6 V | 2.0 V to 3.6 V | Both operate over the same low-voltage range, allowing use in 2.5 V and 3.3 V systems. |
| Logic Family | LCX (Low-Voltage CMOS) | LCX (Low-Voltage CMOS) | Same logic family ensures compatible input thresholds, output drive, and 5 V tolerant inputs. |
| Number of Channels | 8 | 8 | Both provide eight buffered channels, matching bus width requirements. |
| Output Drive Current | ±24 mA | ±24 mA | Identical drive strength ensures comparable fan-out and signal integrity performance. |
| 5 V Tolerant Inputs | Yes | Yes | Allows safe interfacing with 5 V logic without additional level shifting. |
| Package | TSSOP-20 | TSSOP-20 | Same package footprint, but pin functions differ due to the direction control pin, so PCB layout must account for the different pinout. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature range supports use in industrial and commercial environments. |
| Propagation Delay (tPD) | ~6.5 ns (typical at 3.3 V) | ~6.5 ns (typical at 3.3 V) | Similar propagation delay ensures comparable timing performance in high-speed designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74LCX244MTC | 74LCX245TTR |
|---|---|---|
| Supplier | - | STMicroelectronics |
| Series | 74LCX | 74LCX |
| Part Status | Active | Obsolete |
| Logic Type | Buffer, Non-Inverting | Transceiver, Non-Inverting |
| Number of Elements | 2 | 1 |
| Number of Bits per Element | 4 | 8 |
| Output Type | 3-State | 3-State |
| Current - Output High Low | - | 24mA, 24mA |
| Voltage - Supply | 2V ~ 3.6V | 2V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) | -55°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Base Product Number | 74LCX244 | - |
| Current - Output High, Low | 24mA, 24mA | - |
| Packaging | Tube | - |
The 74LCX244MTC is an octal buffer/line driver with non-inverting 3-state outputs, organized as two 4-bit sections with separate output-enable pins. The 74LCX245TTR is an octal bus transceiver with non-inverting 3-state outputs, designed for bidirectional asynchronous communication between two data buses, with direction control and output-enable pins.
No. The 74LCX244MTC uses a 20-pin TSSOP package with two output-enable pins (1OE and 2OE) and no direction pin. The 74LCX245TTR uses a 20-pin TSSOP package with one direction pin (DIR) and one output-enable pin (OE). The pin functions differ, so they are not direct drop-in replacements.
No. The 74LCX244MTC is a unidirectional octal buffer/line driver. It cannot perform bidirectional data transfer because it lacks a direction control pin. The 74LCX245TTR is specifically designed for bidirectional bus communication.
Both the 74LCX244MTC and 74LCX245TTR operate from a 2.0 V to 3.6 V VCC supply. They are 3.3 V logic devices with 5 V tolerant inputs and outputs, allowing interfacing with 5 V logic systems. These parameters are consistent across the LCX family from manufacturers such as ON Semiconductor (now onsemi) and NXP.
The 74LCX244MTC is supplied in a 20-pin TSSOP (Thin Shrink Small Outline Package) with a 4.4 mm body width, surface-mount. The 74LCX245TTR is also supplied in a 20-pin TSSOP with a 4.4 mm body width, surface-mount. Both use the same package footprint but have different pin functions.
Both devices typically have a propagation delay (tPD) of approximately 5.5 ns at 3.3 V VCC and 25°C. They provide ±24 mA output drive at 3.0 V VCC, making them suitable for bus driving and interfacing applications. These values are specified in manufacturer datasheets from onsemi and NXP.
The 74LCX244MTC is the appropriate choice for unidirectional signal buffering. It provides two independent 4-bit buffer sections with separate output-enable controls, allowing flexible control of signal flow in one direction only.
The 74LCX245TTR is the appropriate choice for bidirectional bus interfacing. Its DIR pin selects the direction of data flow (A to B or B to A), and the OE pin enables or disables both ports, making it suitable for multiplexed or shared bus architectures.
No. Because the pin functions differ (two output-enable pins versus one direction pin and one output-enable pin), they are not interchangeable without redesigning the PCB and control logic. Always verify pinout, control signals, and timing against the specific manufacturer datasheet before substitution.