74HCT540D
東芝電晶體與存儲
- Lifecycle
- Active
- Stock
- 1645 件
- Package
- SOIC-14
- Series
- 邏輯-緩衝器、驅動器、接收器、收發器
對 74HCT540D 和 74HCT7273D,118 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The 74HCT540D and 74HCT7273D,118 are not functionally interchangeable. The 74HCT540D is an octal inverting buffer/line driver with 3-state outputs, while the 74HCT7273D,118 is an octal D-type flip-flop with 3-state outputs. They differ in logic function, input/output configuration, latching behavior, and pinout, so direct substitution is not possible without circuit redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT540D | 74HCT7273D,118 | Why it matters |
|---|---|---|---|
| Logic Function | Octal buffer/line driver with 3-state outputs (inverting) | Octal D-type flip-flop with 3-state outputs | The core logic function determines whether the device buffers/transmits signals combinationally or stores data on a clock edge, which fundamentally affects circuit behavior and substitutability. |
| Output Type | 3-state, inverting | 3-state, non-inverting | Inverting versus non-inverting outputs changes the logic polarity seen by downstream circuitry, so a direct drop-in replacement would invert signal levels. |
| Number of Flip-Flops / Storage Elements | 0 (combinational buffer) | 8 (D-type flip-flops) | Presence of storage elements means the device can latch and hold data, enabling sequential logic, whereas a pure buffer cannot retain state. |
| Clock Input | None | Yes (edge-triggered) | A clock input is required for synchronous data capture; its absence or presence dictates whether the part can be used in clocked/sequential designs. |
| Control Inputs | Output enable (OE1, OE2) | Output enable (OE), clock (CP), master reset (MR) | Different control pin sets affect how the device is enabled, reset, and clocked, which impacts board-level wiring and timing design. |
| Supply Voltage (VCC) | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Matching supply voltage ranges ensures both devices are electrically compatible with the same 5 V TTL-level system rails. |
| Logic Family | HCT (High-speed CMOS, TTL-compatible) | HCT (High-speed CMOS, TTL-compatible) | Same logic family means compatible input thresholds and output drive characteristics, simplifying mixed-family interfacing. |
| Output Drive Current (IOH/IOL) | ±6 mA | ±6 mA | Identical drive current means both can drive similar loads, so fan-out and load-driving capability are equivalent. |
| Propagation Delay (tPD) | Typically ~12 ns at 5 V | Typically ~15 ns at 5 V (clock to output) | Propagation delay affects maximum operating frequency and timing margins; differing delays may require timing re-analysis in synchronous designs. |
| Package | SO-20 (SOIC-20) | SO-20 (SOIC-20) | Package footprint and pin count determine physical board compatibility; identical SO-20 packages allow the same PCB land pattern. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT540D | 74HCT7273D,118 |
|---|---|---|
| Supplier | - | NXP USA Inc. |
| Series | 74HCT | 74HCT |
| Part Status | Active | Obsolete |
| Function | - | Master Reset |
| Type | - | D-Type |
| Output Type | 3-State | Non-Inverted |
| Number of Elements | 1 | 1 |
| Number of Bits per Element | 8 | 8 |
| Clock Frequency | - | 56 MHz |
| Max Propagation Delay @ V Max CL | - | 30ns @ 4.5V, 50pF |
| Trigger Type | - | Positive Edge |
| Current - Output High Low | 6mA, 6mA | -, 4mA |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Current - Quiescent (Iq) | - | 8 µA |
| Input Capacitance | - | 3.5 pF |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Logic Type | Buffer, Inverting | - |
The 74HCT540D is an octal inverting buffer/line driver with 3-state outputs, featuring two active-low output enable pins. The 74HCT7273D,118 is an octal D-type flip-flop with 3-state outputs, featuring a common clock input and a common active-low output enable. The 74HCT540D is a combinational logic buffer, while the 74HCT7273D,118 is a sequential logic register.
No. The 74HCT540D and 74HCT7273D,118 have different pin functions and internal architectures. The 74HCT540D uses pins for data inputs, inverting outputs, and two output enable controls. The 74HCT7273D,118 uses pins for data inputs, non-inverting outputs, a clock input, and a single output enable control. They are not direct pin-to-pin replacements.
Yes. Both devices are members of the 74HCT logic family and are specified for a nominal supply voltage of 5 V, with a typical operating range of 4.5 V to 5.5 V. They are compatible with TTL voltage levels.
The 74HCT540D provides inverting outputs, meaning the output logic level is the opposite of the input. The 74HCT7273D,118 provides non-inverting outputs, meaning the output logic level matches the registered input after the clock edge. This difference affects the polarity of the signal in the target application.
The 74HCT540D is a combinational device and has no clock input; its outputs respond directly to input changes when enabled. The 74HCT7273D,118 is a clocked flip-flop that captures input data on the rising edge of the clock signal and holds that data until the next clock edge.
Both devices are specified with standard 74HCT output drive. The 74HCT540D datasheet typically specifies a symmetric output drive of ±6 mA at 5 V. The 74HCT7273D,118 datasheet typically specifies a symmetric output drive of ±6 mA at 5 V. For exact limits, refer to the respective manufacturer datasheets.
Both devices feature 3-state outputs, making them suitable for bus-oriented applications. The 74HCT540D is used for buffering or driving bus lines with inversion. The 74HCT7273D,118 is used for storing and driving bus data with non-inversion. The choice depends on whether the application requires registered data storage or simple buffering.
The 74HCT540D is commonly available in a 20-pin SOIC package (D suffix). The 74HCT7273D,118 is commonly available in a 20-pin SOIC package (D suffix) with tape and reel packaging (118 suffix). While both may be offered in SOIC-20, the specific package drawing and thermal characteristics should be verified from the manufacturer datasheet for each part number.