74HCT02D
東芝電晶體與存儲
- Lifecycle
- Active
- Stock
- 5658 件
- Package
- SOIC-16
- Series
- 邏輯-門和逆變器
對 74HCT02D 和 74HCT240D 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The 74HCT02D and 74HCT240D are not functionally interchangeable. The 74HCT02D is a quad 2-input NOR gate, while the 74HCT240D is an octal buffer/line driver with 3-state outputs. They differ in logic function, channel count, output type, and pin configuration, making direct substitution impossible without redesigning the surrounding circuit.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT02D | 74HCT240D | Why it matters |
|---|---|---|---|
| Logic Function | Quad 2-input NOR gate | Octal 3-state inverting buffer/line driver | Defines the fundamental logic operation; these devices are not functionally interchangeable. |
| Number of Gates / Channels | 4 | 8 | Determines how many independent signal paths the device can process. |
| Output Type | Push-pull (totem-pole) | 3-state (tri-state) | 3-state outputs allow bus sharing; push-pull outputs cannot be tied together. |
| Inputs per Channel | 2 | 1 | Affects the logic equation implemented and the required input signal count. |
| Inverting | Yes (NOR function inverts) | Yes (inverting buffer) | Both invert, but the 74HCT02D also performs a logical NOR of two inputs. |
| Output Drive Current (IOH/IOL) | ±4 mA (standard HCT) | ±6 mA (standard HCT) | Higher drive current enables driving heavier loads or longer traces. |
| Propagation Delay (tpd) | Typ. 9 ns at 5 V | Typ. 12 ns at 5 V | Affects maximum operating frequency and timing margins in a circuit. |
| Package | SO14 (14-pin SOIC) | SO20 (20-pin SOIC) | Different pin counts and footprints prevent direct PCB drop-in replacement. |
| Pin Count | 14 | 20 | Determines board layout compatibility and available I/O pins. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both operate in the standard HCT 5 V range, ensuring TTL-compatible logic levels. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT02D | 74HCT240D |
|---|---|---|
| Supplier | - | Toshiba Semiconductor and Storage |
| Series | 74HCT | 74HCT |
| Part Status | Obsolete | Active |
| Logic Type | NOR Gate | Buffer, Inverting |
| Number of Elements | - | 2 |
| Number of Bits per Element | - | 4 |
| Output Type | - | 3-State |
| Current - Output High Low | 4mA, 4mA | 6mA, 6mA |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 4 | - |
| Number of Inputs | 2 | - |
| Current - Quiescent (Max) | 1 µA | - |
| Logic Level - Low | 0.8V | - |
| Logic Level - High | 2V | - |
| Max Propagation Delay @ V Max CL | 16ns @ 5.5V, 50pF | - |
The 74HCT02D is a quad 2-input NOR gate, while the 74HCT240D is an octal buffer/line driver with 3-state outputs. The 74HCT02D performs logic NOR operations on four independent pairs of inputs, whereas the 74HCT240D is designed for bus driving and signal buffering, featuring eight inverting buffers with 3-state output control.
No. The 74HCT02D is typically supplied in a 14-pin package (SO14), while the 74HCT240D is supplied in a 20-pin package (SO20). The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements for each other.
Yes. Both devices are members of the 74HCT logic family and are specified for a nominal supply voltage of 5 V, with a recommended operating range typically from 4.5 V to 5.5 V. They are also TTL-voltage compatible at their inputs.
Yes. The 74HCT240D features 3-state outputs controlled by two active-low output enable pins (1OE and 2OE), allowing its outputs to be placed in a high-impedance state for bus sharing. The 74HCT02D has standard push-pull outputs and no 3-state capability.
Both devices are specified with standard 74HCT output drive, typically ±4 mA at 5 V. However, the 74HCT240D is specifically characterized for bus-driving applications and its datasheet provides symmetrical drive currents for both HIGH and LOW states, while the 74HCT02D is a general-purpose logic gate with similar but not bus-optimized drive specifications.
No. The 74HCT240D is an inverting buffer, not a NOR gate. It cannot perform the logical NOR function of the 74HCT02D. Substitution would require external logic or a different device that implements the required NOR function.
Both are commonly available in SO (Small Outline) packages, but with different pin counts. The 74HCT02D is typically offered in a 14-pin SO package, while the 74HCT240D is typically offered in a 20-pin SO package. They are not available in identical package outlines.
The 74HCT240D is more suitable for driving a shared data bus because it provides 3-state outputs that can be disabled to high impedance, allowing multiple devices to share the same bus lines. The 74HCT02D lacks 3-state outputs and is not intended for bus multiplexing applications.