74HCT00D
東芝電晶體與存儲
- Lifecycle
- Active
- Stock
- 1289 件
- Package
- SOIC-20
- Series
- 邏輯-門和逆變器
對 74HCT00D 和 74HCT240D,653 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The 74HCT00D and 74HCT240D,653 are not functionally interchangeable. The 74HCT00D is a quad 2-input NAND gate, while the 74HCT240D,653 is an octal buffer/line driver with 3-state outputs. They differ in logic function, channel count, output type, and pin configuration, making direct substitution impossible without circuit redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT00D | 74HCT240D,653 | Why it matters |
|---|---|---|---|
| Logic Function | Quad 2-input NAND gate | Octal inverting buffer/line driver with 3-state outputs | Defines the fundamental logic operation performed; these devices are not functionally interchangeable. |
| Number of Gates / Channels | 4 gates | 8 channels | Determines how many independent signal paths the device can process simultaneously. |
| Output Type | Push-pull (totem-pole) | 3-state (tri-state) | 3-state outputs allow bus sharing by high-impedance disconnection, which push-pull outputs cannot do. |
| Inputs per Channel | 2 inputs per gate | 1 input per channel | Affects the logic capability and pin usage for implementing a given circuit function. |
| Output Drive Current (IOH/IOL) | ±4 mA | ±6 mA | Higher drive current enables driving heavier loads or longer traces without additional buffering. |
| Propagation Delay (tpd) | Typ. 9 ns at 5 V | Typ. 12 ns at 5 V | Affects maximum operating frequency and timing margins in synchronous designs. |
| Package | SO14 (14-pin SOIC) | SO20 (20-pin SOIC) | Different pin counts and footprints prevent direct PCB drop-in replacement. |
| Pin Count | 14 | 20 | Determines board layout compatibility and available I/O connections. |
| Enable / Control Inputs | None | Two active-low output enable pins (1OE, 2OE) | Enable pins allow output high-impedance control for bus arbitration, absent in the NAND gate device. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both are HCT-family devices with TTL-compatible thresholds, so supply compatibility is identical. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT00D | 74HCT240D,653 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | 74HCT | Bulk |
| Logic Type | NAND Gate | Active |
| Part Status | Obsolete | - |
| Number of Circuits | 4 | - |
| Number of Inputs | 2 | - |
| Voltage - Supply | 4.5V ~ 5.5V | - |
| Current - Quiescent (Max) | 1 µA | - |
| Current - Output High Low | 4mA, 4mA | - |
| Logic Level - Low | 0.8V | - |
| Logic Level - High | 2V | - |
| Max Propagation Delay @ V Max CL | 17ns @ 5.5V, 50pF | - |
| Operating Temperature | -40°C ~ 85°C | - |
| Mounting Type | Surface Mount | - |
The 74HCT00D contains four independent 2-input NAND gates, while the 74HCT240D,653 contains eight inverting 3-state buffers arranged as two 4-bit groups with separate output enable pins. They are not functionally equivalent and cannot be used interchangeably without redesigning the surrounding logic.
No. The 74HCT00D is typically supplied in a 14-pin SOIC package, whereas the 74HCT240D,653 is supplied in a 20-pin SOIC package. The pin counts, pin assignments, and package footprints differ, so they are not drop-in replacements for each other.
Yes. Both are HCT-family logic devices and are specified for a nominal 5 V supply, typically operating over the 4.5 V to 5.5 V range as stated in their respective manufacturer datasheets. HCT inputs are also compatible with TTL logic levels.
The 74HCT240D,653 is intended for bus-oriented applications because its 3-state outputs can be placed in a high-impedance state via the output enable pins, allowing multiple devices to share a common bus. The 74HCT00D has standard totem-pole outputs and no 3-state capability, so it is not suitable for direct bus sharing.
No. The 74HCT240D,653 provides inverting buffers, not NAND gates, and its 3-state outputs require proper enable signal control. Replacing a 74HCT00D with a 74HCT240D,653 would change the logic function and require circuit and pinout modifications.
Both devices are HCT-family parts typically specified with symmetric CMOS output drive, commonly in the range of ±4 mA to ±6 mA per output at 5 V, depending on the manufacturer and test conditions. For guaranteed drive current, refer to the specific manufacturer datasheet for each part number.
They belong to the same HCT logic family and share similar TTL-compatible input thresholds and noise margins. However, because their logic functions, pinouts, and output structures differ, they are not interchangeable in a circuit even though their family-level electrical characteristics are similar.
The 74HCT240D,653 indicates 3-state outputs, as the 240 function is an octal inverting buffer with 3-state control. The 74HCT00D does not have 3-state outputs; it provides standard push-pull NAND gate outputs.