74HC02D
東芝電晶體與存儲
- Lifecycle
- Active
- Stock
- 1347 件
- Package
- SOIC-14
- Series
- 邏輯-門和逆變器
對 74HC02D 和 74HC03D 的深入比較,為您帶來關於其規格和關鍵特性的寶貴見解。我們詳細介紹了重要因素,包括 RoHS 合規性、REACH 狀態、系列、安裝方式、封裝類型以及其他相關特性。並排展示差異,簡化了元件選擇,讓您更輕鬆地為您的特定應用選擇最佳方案。
Replacement verdict
The 74HC03D and 74HC02D are not functionally interchangeable despite sharing the same 74HC CMOS logic family and SOIC-14 package. The 74HC03D provides open-drain outputs requiring external pull-up resistors, while the 74HC02D features standard push-pull outputs. This fundamental output architecture difference, combined with divergent logic functions and electrical characteristics, makes direct substitution inadvisable without circuit redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HC03D | 74HC02D | Why it matters |
|---|---|---|---|
| Logic Function | Quad 2-input NAND gate with open-drain outputs | Quad 2-input NOR gate | The fundamental logic function differs, so these parts are not functionally interchangeable in a circuit. |
| Output Type | Open-drain | Push-pull (totem-pole) | Open-drain outputs require external pull-up resistors and allow wired-AND configurations, while push-pull outputs drive both high and low actively. |
| Supply Voltage Range | 2 V to 6 V | 2 V to 6 V | Both parts operate over the same supply range, allowing use in similar 2 V to 6 V logic systems. |
| Number of Gates | 4 | 4 | Both devices contain four independent gates, matching the logic density per package. |
| Number of Inputs per Gate | 2 | 2 | Both devices use 2-input gates, so the input count per gate is identical. |
| Package | SO14 (SOIC-14) | SO14 (SOIC-14) | Identical package and pin count simplify PCB footprint and assembly compatibility. |
| Pin Count | 14 | 14 | Same pin count supports similar board layout considerations. |
| Logic Family | 74HC | 74HC | Both belong to the HC CMOS family, sharing similar input thresholds and noise margins. |
| Output Drive Current | Sink current only (open-drain); no active high drive | Balanced sink and source current | The 74HC03D can only pull low and relies on a pull-up for high, while the 74HC02D actively drives both logic states. |
| Typical Propagation Delay | Approximately 9 ns at 4.5 V (open-drain, with pull-up) | Approximately 7 ns at 4.5 V | Timing differs due to output structure, which can affect speed-sensitive designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HC02D | 74HC03D |
|---|---|---|
| Series | 74HC | 74HC |
| Part Status | Active | Active |
| Logic Type | NOR Gate | NAND Gate |
| Number of Circuits | 4 | 4 |
| Number of Inputs | 2 | 2 |
| Voltage - Supply | 2V ~ 6V | 2V ~ 6V |
| Current - Quiescent (Max) | 1 µA | 1 µA |
| Current - Output High Low | 5.2mA, 5.2mA | -, 5.2mA |
| Logic Level - Low | 0.5V ~ 1.8V | 0.5V ~ 1.8V |
| Logic Level - High | 1.5V ~ 4.2V | 1.5V ~ 4.2V |
| Max Propagation Delay @ V Max CL | 16ns @ 6V, 50pF | 13ns @ 6V, 50pF |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Features | - | Open Drain |
The 74HC03D contains four 2-input NAND gates with open-drain outputs, while the 74HC02D contains four 2-input NOR gates with standard push-pull (totem-pole) outputs. The logic function and output stage type are the key differentiators.
No. They implement different logic functions (NAND vs NOR) and have different output structures (open-drain vs push-pull). Direct substitution without redesigning the surrounding circuitry is not possible.
The 74HC03D features open-drain outputs, meaning it can sink current but cannot source current. It requires an external pull-up resistor to achieve a logic HIGH state. This allows wired-AND connections and level shifting when the pull-up voltage differs from VCC.
The 74HC02D has standard CMOS push-pull outputs, capable of both sourcing and sinking current. It does not require external pull-up resistors for normal logic operation and provides rail-to-rail output swing.
Yes. Both devices are offered in the SO14 package (the "D" suffix in 74HC03D and 74HC02D typically denotes SO14). They share the same 14-pin configuration with identical power supply and ground pins, and each contains four 2-input gates with the same input pin assignments. However, the output stage behavior differs as noted above.
Both devices are 74HC series CMOS logic ICs typically specified for a supply voltage range of 2.0 V to 6.0 V, with a nominal 5 V operation. They operate over the standard industrial temperature range of -40 °C to +125 °C, depending on the specific manufacturer's datasheet.
The 74HC03D is the appropriate choice for wired-AND or open-drain bus applications because its open-drain outputs can be tied together with a single pull-up resistor. The 74HC02D's push-pull outputs cannot be directly tied together without risking contention and excessive current.
Both are commonly available in SO14 (D suffix) and other standard packages such as DIP-14 and TSSOP-14, depending on the manufacturer. Package availability may vary by supplier, so the specific orderable part number should be verified against the manufacturer datasheet.